Diff: main.cpp

Revision:

0:ad2237362248

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Mar 20 23:20:41 2019 -0400
@@ -0,0 +1,226 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2019 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "mbed.h"
+#include <stdio.h>
+#include <errno.h>
+
+#include "BlockDevice.h"
+#include "SDIOBlockDevice.h"
+
+// This will take the system's default block device
+//BlockDevice *bd = BlockDevice::get_default_instance();
+BlockDevice *bd = new SDIOBlockDevice();
+
+// Instead of the default block device, you can define your own block device.
+// For example: HeapBlockDevice with size of 2048 bytes, read size 1, write size 1 and erase size 512.
+// #include "HeapBlockDevice.h"
+// BlockDevice *bd = new HeapBlockDevice(2048, 1, 1, 512);
+
+
+// This example uses LittleFileSystem as the default file system
+#include "LittleFileSystem.h"
+LittleFileSystem fs("fs");
+
+// Uncomment the following two lines and comment the previous two to use FAT file system.
+// #include "FATFileSystem.h"
+// FATFileSystem fs("fs");
+
+
+// Set up the button to trigger an erase
+//InterruptIn irq(BUTTON1);
+InterruptIn irq(SW2);
+
+void erase() {
+    printf("Initializing the block device... ");
+    fflush(stdout);
+    int err = bd->init();
+    printf("%s\n", (err ? "Fail :(" : "OK"));
+    if (err) {
+        error("error: %s (%d)\n", strerror(-err), err);
+    }
+
+    printf("Erasing the block device... ");
+    fflush(stdout);
+    err = bd->erase(0, bd->size());
+    printf("%s\n", (err ? "Fail :(" : "OK"));
+    if (err) {
+        error("error: %s (%d)\n", strerror(-err), err);
+    }
+
+    printf("Deinitializing the block device... ");
+    fflush(stdout);
+    err = bd->deinit();
+    printf("%s\n", (err ? "Fail :(" : "OK"));
+    if (err) {
+        error("error: %s (%d)\n", strerror(-err), err);
+    }
+}
+
+
+// Entry point for the example
+int main() {
+    printf("--- Mbed OS filesystem example ---\n");
+
+    // Setup the erase event on button press, use the event queue
+    // to avoid running in interrupt context
+    irq.fall(mbed_event_queue()->event(erase));
+
+    // Try to mount the filesystem
+    printf("Mounting the filesystem... ");
+    fflush(stdout);
+    int err = fs.mount(bd);
+    printf("%s\n", (err ? "Fail :(" : "OK"));
+    if (err) {
+        // Reformat if we can't mount the filesystem
+        // this should only happen on the first boot
+        printf("No filesystem found, formatting... ");
+        fflush(stdout);
+        err = fs.reformat(bd);
+        printf("%s\n", (err ? "Fail :(" : "OK"));
+        if (err) {
+            error("error: %s (%d)\n", strerror(-err), err);
+        }
+    }
+
+    // Open the numbers file
+    printf("Opening \"/fs/numbers.txt\"... ");
+    fflush(stdout);
+    FILE *f = fopen("/fs/numbers.txt", "r+");
+    printf("%s\n", (!f ? "Fail :(" : "OK"));
+    if (!f) {
+        // Create the numbers file if it doesn't exist
+        printf("No file found, creating a new file... ");
+        fflush(stdout);
+        f = fopen("/fs/numbers.txt", "w+");
+        printf("%s\n", (!f ? "Fail :(" : "OK"));
+        if (!f) {
+            error("error: %s (%d)\n", strerror(errno), -errno);
+        }
+
+        for (int i = 0; i < 10; i++) {
+            printf("\rWriting numbers (%d/%d)... ", i, 10);
+            fflush(stdout);
+            err = fprintf(f, "    %d\n", i);
+            if (err < 0) {
+                printf("Fail :(\n");
+                error("error: %s (%d)\n", strerror(errno), -errno);
+            }
+        }
+        printf("\rWriting numbers (%d/%d)... OK\n", 10, 10);
+
+        printf("Seeking file... ");
+        fflush(stdout);
+        err = fseek(f, 0, SEEK_SET);
+        printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
+        if (err < 0) {
+            error("error: %s (%d)\n", strerror(errno), -errno);
+        }
+    }
+
+    // Go through and increment the numbers
+    for (int i = 0; i < 10; i++) {
+        printf("\rIncrementing numbers (%d/%d)... ", i, 10);
+        fflush(stdout);
+
+        // Get current stream position
+        long pos = ftell(f);
+
+        // Parse out the number and increment
+        int32_t number;
+        fscanf(f, "%d", &number);
+        number += 1;
+
+        // Seek to beginning of number
+        fseek(f, pos, SEEK_SET);
+    
+        // Store number
+        fprintf(f, "    %d\n", number);
+
+        // Flush between write and read on same file
+        fflush(f);
+    }
+    printf("\rIncrementing numbers (%d/%d)... OK\n", 10, 10);
+
+    // Close the file which also flushes any cached writes
+    printf("Closing \"/fs/numbers.txt\"... ");
+    fflush(stdout);
+    err = fclose(f);
+    printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
+    if (err < 0) {
+        error("error: %s (%d)\n", strerror(errno), -errno);
+    }
+    
+    // Display the root directory
+    printf("Opening the root directory... ");
+    fflush(stdout);
+    DIR *d = opendir("/fs/");
+    printf("%s\n", (!d ? "Fail :(" : "OK"));
+    if (!d) {
+        error("error: %s (%d)\n", strerror(errno), -errno);
+    }
+
+    printf("root directory:\n");
+    while (true) {
+        struct dirent *e = readdir(d);
+        if (!e) {
+            break;
+        }
+
+        printf("    %s\n", e->d_name);
+    }
+
+    printf("Closing the root directory... ");
+    fflush(stdout);
+    err = closedir(d);
+    printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
+    if (err < 0) {
+        error("error: %s (%d)\n", strerror(errno), -errno);
+    }
+
+    // Display the numbers file
+    printf("Opening \"/fs/numbers.txt\"... ");
+    fflush(stdout);
+    f = fopen("/fs/numbers.txt", "r");
+    printf("%s\n", (!f ? "Fail :(" : "OK"));
+    if (!f) {
+        error("error: %s (%d)\n", strerror(errno), -errno);
+    }
+
+    printf("numbers:\n");
+    while (!feof(f)) {
+        int c = fgetc(f);
+        printf("%c", c);
+    }
+
+    printf("\rClosing \"/fs/numbers.txt\"... ");
+    fflush(stdout);
+    err = fclose(f);
+    printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
+    if (err < 0) {
+        error("error: %s (%d)\n", strerror(errno), -errno);
+    }
+
+    // Tidy up
+    printf("Unmounting... ");
+    fflush(stdout);
+    err = fs.unmount();
+    printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
+    if (err < 0) {
+        error("error: %s (%d)\n", strerror(-err), err);
+    }
+        
+    printf("Mbed OS filesystem example done!\n");
+}