mbed library sources 只保留l0和l1系列的库,修改l0的库的晶振为12m
Dependents: SANFAN_read_analog_value nucleo-wdg Nucleo_sleep_copy
Fork of mbed-src by
api/SPI.h
- Committer:
- bogdanm
- Date:
- 2013-08-05
- Revision:
- 13:0645d8841f51
- Parent:
- 10:3bc89ef62ce7
- Child:
- 50:b08ceb75017d
File content as of revision 13:0645d8841f51:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_SPI_H #define MBED_SPI_H #include "platform.h" #if DEVICE_SPI #include "spi_api.h" namespace mbed { /** A SPI Master, used for communicating with SPI slave devices * * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz * * Most SPI devices will also require Chip Select and Reset signals. These * can be controlled using <DigitalOut> pins * * Example: * @code * // Send a byte to a SPI slave, and record the response * * #include "mbed.h" * * SPI device(p5, p6, p7); // mosi, miso, sclk * * int main() { * int response = device.write(0xFF); * } * @endcode */ class SPI { public: /** Create a SPI master connected to the specified pins * * Pin Options: * (5, 6, 7) or (11, 12, 13) * * mosi or miso can be specfied as NC if not used * * @param mosi SPI Master Out, Slave In pin * @param miso SPI Master In, Slave Out pin * @param sclk SPI Clock pin */ SPI(PinName mosi, PinName miso, PinName sclk); /** Configure the data transmission format * * @param bits Number of bits per SPI frame (4 - 16) * @param mode Clock polarity and phase mode (0 - 3) * * @code * mode | POL PHA * -----+-------- * 0 | 0 0 * 1 | 0 1 * 2 | 1 0 * 3 | 1 1 * @endcode */ void format(int bits, int mode = 0); /** Set the spi bus clock frequency * * @param hz SCLK frequency in hz (default = 1MHz) */ void frequency(int hz = 1000000); /** Write to the SPI Slave and return the response * * @param value Data to be sent to the SPI slave * * @returns * Response from the SPI slave */ virtual int write(int value); protected: spi_t _spi; void aquire(void); static SPI *_owner; int _bits; int _mode; int _hz; }; } // namespace mbed #endif #endif