Diff: sx1276/sx1276.h

Revision:

13:618826a997e2

Parent:

12:aa5b3bf7fdf4

Child:

16:d447f8d2d2d6

--- a/sx1276/sx1276.h	Mon Oct 13 07:33:11 2014 +0000
+++ b/sx1276/sx1276.h	Tue Dec 16 10:02:45 2014 +0000
@@ -25,7 +25,7 @@
 
 #define RX_BUFFER_SIZE                              256
 
-#define DEFAULT_TIMEOUT								200 //usec
+#define DEFAULT_TIMEOUT                             200 //usec
 #define RSSI_OFFSET                                 -139.0
 
 
@@ -57,77 +57,84 @@
     /*!
      * SX1276 DIO pins
      */
-	InterruptIn dio0;
-	InterruptIn dio1;
-	InterruptIn dio2; 
-	InterruptIn dio3;
-	InterruptIn dio4;
-	DigitalIn dio5;
-	
-	bool isRadioActive;
-	
-	uint8_t boardConnected; //1 = SX1276MB1LAS; 0 = SX1276MB1MAS
-	
-	uint8_t *rxBuffer;
-	
-	uint8_t previousOpMode;
-	
-	/*!
-	 * Hardware DIO IRQ functions
-	 */
-	DioIrqHandler *dioIrq;
-	
-	/*!
-	 * Tx and Rx timers
-	 */
-	Timeout txTimeoutTimer;
-	Timeout rxTimeoutTimer;
-	Timeout rxTimeoutSyncWord;
-	
-	/*!
-	 *  rxTx: [1: Tx, 0: Rx]
-	 */
-	uint8_t rxTx;
-	
-	RadioSettings_t settings;
-	
-	static const FskBandwidth_t FskBandwidths[] ;
+    InterruptIn dio0;
+    InterruptIn dio1;
+    InterruptIn dio2; 
+    InterruptIn dio3;
+    InterruptIn dio4;
+    DigitalIn dio5;
+    
+    bool isRadioActive;
+    
+    uint8_t boardConnected; //1 = SX1276MB1LAS; 0 = SX1276MB1MAS
+    
+    uint8_t *rxBuffer;
+    
+    uint8_t previousOpMode;
+    
+    /*!
+     * Hardware DIO IRQ functions
+     */
+    DioIrqHandler *dioIrq;
+    
+    /*!
+     * Tx and Rx timers
+     */
+    Timeout txTimeoutTimer;
+    Timeout rxTimeoutTimer;
+    Timeout rxTimeoutSyncWord;
+    
+    /*!
+     *  rxTx: [1: Tx, 0: Rx]
+     */
+    uint8_t rxTx;
+    
+    RadioSettings_t settings;
+    
+    static const FskBandwidth_t FskBandwidths[] ;
 protected:
 
-	/*!
-	* Performs the Rx chain calibration for LF and HF bands
-	* \remark Must be called just after the reset so all registers are at their
-	*         default values
-	*/
-	void RxChainCalibration( void );
+    /*!
+    * Performs the Rx chain calibration for LF and HF bands
+    * \remark Must be called just after the reset so all registers are at their
+    *         default values
+    */
+    void RxChainCalibration( void );
 
 public:
-	SX1276( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ), 
-			void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool ChannelActivityDetected ),
-			PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
+    SX1276( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ), 
+            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool channelActivityDetected ),
+            PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
             PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5 ); 
     SX1276( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ), 
-            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool ChannelActivityDetected ) );
-	virtual ~SX1276( );
-	
-	//-------------------------------------------------------------------------
-	//						Redefined Radio functions
-	//-------------------------------------------------------------------------
-	/*!
+            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool channelActivityDetected ) );
+    virtual ~SX1276( );
+    
+    //-------------------------------------------------------------------------
+    //                        Redefined Radio functions
+    //-------------------------------------------------------------------------
+    /*!
      * Return current radio status
      *
      * @param status Radio status. [IDLE, RX_RUNNING, TX_RUNNING]
      */
     virtual RadioState GetState( void ); 
     
-	/*!
+    /*!
+     * @brief Configures the SX1276 with the given modem
+     *
+     * @param [IN] modem Modem to be used [0: FSK, 1: LoRa] 
+     */
+    virtual void SetModem( ModemType modem );
+
+    /*!
      * @brief Sets the channel frequency
      *
      * @param [IN] freq         Channel RF frequency
      */
     virtual void SetChannel( uint32_t freq );
     
-	/*!
+    /*!
      * @brief Sets the channels configuration
      *
      * @param [IN] modem      Radio modem to be used [0: FSK, 1: LoRa]
@@ -138,7 +145,7 @@
      */
     virtual bool IsChannelFree( ModemType modem, uint32_t freq, int8_t rssiThresh );
     
-	/*!
+    /*!
      * @brief Generates a 32 bits random value based on the RSSI readings
      *
      * \remark This function sets the radio in LoRa modem mode and disables
@@ -150,7 +157,7 @@
      */
     virtual uint32_t Random( void );
     
-	/*!
+    /*!
      * @brief Sets the reception parameters
      *
      * @param [IN] modem        Radio modem to be used [0: FSK, 1: LoRa]
@@ -175,9 +182,10 @@
      *                          FSK : N/A ( set to 0 )
      *                          LoRa: timeout in symbols
      * @param [IN] fixLen       Fixed length packets [0: variable, 1: fixed]
+     * @param [IN] payloadLen   Sets payload length when fixed lenght is used
      * @param [IN] crcOn        Enables/Disables the CRC [0: OFF, 1: ON]
-     * @param [IN] FreqHopOn    Enables disables the intra-packet frequency hopping  [0: OFF, 1: ON] (LoRa only)
- 	 * @param [IN] HopPeriod    Number of symbols bewteen each hop (LoRa only)
+     * @param [IN] freqHopOn    Enables disables the intra-packet frequency hopping  [0: OFF, 1: ON] (LoRa only)
+     * @param [IN] hopPeriod    Number of symbols bewteen each hop (LoRa only)
      * @param [IN] iqInverted   Inverts IQ signals ( LoRa only )
      *                          FSK : N/A ( set to 0 )
      *                          LoRa: [0: not inverted, 1: inverted]
@@ -188,10 +196,11 @@
                                uint32_t datarate, uint8_t coderate,
                                uint32_t bandwidthAfc, uint16_t preambleLen,
                                uint16_t symbTimeout, bool fixLen,
-                               bool crcOn, bool FreqHopOn, uint8_t HopPeriod,
+                               uint8_t payloadLen,
+                               bool crcOn, bool freqHopOn, uint8_t hopPeriod,
                                bool iqInverted, bool rxContinuous );
     
-	/*!
+    /*!
      * @brief Sets the transmission parameters
      *
      * @param [IN] modem        Radio modem to be used [0: FSK, 1: LoRa]
@@ -213,8 +222,8 @@
      * @param [IN] preambleLen  Sets the preamble length
      * @param [IN] fixLen       Fixed length packets [0: variable, 1: fixed]
      * @param [IN] crcOn        Enables disables the CRC [0: OFF, 1: ON]
-     * @param [IN] FreqHopOn    Enables disables the intra-packet frequency hopping  [0: OFF, 1: ON] (LoRa only)
- 	 * @param [IN] HopPeriod    Number of symbols bewteen each hop (LoRa only)
+     * @param [IN] freqHopOn    Enables disables the intra-packet frequency hopping  [0: OFF, 1: ON] (LoRa only)
+     * @param [IN] hopPeriod    Number of symbols bewteen each hop (LoRa only)
      * @param [IN] iqInverted   Inverts IQ signals ( LoRa only )
      *                          FSK : N/A ( set to 0 )
      *                          LoRa: [0: not inverted, 1: inverted]
@@ -223,10 +232,10 @@
     virtual void SetTxConfig( ModemType modem, int8_t power, uint32_t fdev,
                               uint32_t bandwidth, uint32_t datarate,
                               uint8_t coderate, uint16_t preambleLen,
-                              bool fixLen, bool crcOn, bool FreqHopOn,
-                              uint8_t HopPeriod, bool iqInverted, uint32_t timeout );
+                              bool fixLen, bool crcOn, bool freqHopOn,
+                              uint8_t hopPeriod, bool iqInverted, uint32_t timeout );
     
-	/*!
+    /*!
      * @brief Computes the packet time on air for the given payload
      *
      * \Remark Can only be called once SetRxConfig or SetTxConfig have been called
@@ -238,7 +247,7 @@
      */
     virtual double TimeOnAir ( ModemType modem, uint8_t pktLen );
     
-	/*!
+    /*!
      * @brief Sends the buffer of size. Prepares the packet to be sent and sets
      *        the radio in transmission
      *
@@ -247,43 +256,43 @@
      */
     virtual void Send( uint8_t *buffer, uint8_t size );
     
-	/*!
+    /*!
      * @brief Sets the radio in sleep mode
      */
     virtual void Sleep( void );
     
-	/*!
+    /*!
      * @brief Sets the radio in standby mode
      */
     virtual void Standby( void );
     
-	/*!
+    /*!
      * @brief Sets the radio in reception mode for the given time
      * @param [IN] timeout Reception timeout [us]
      *                     [0: continuous, others timeout]
      */
     virtual void Rx( uint32_t timeout );
     
-	/*!
+    /*!
      * @brief Sets the radio in transmission mode for the given time
      * @param [IN] timeout Transmission timeout [us]
      *                     [0: continuous, others timeout]
      */
     virtual void Tx( uint32_t timeout );
     
-	/*!
+    /*!
      * @brief Start a Channel Activity Detection
      */
-    virtual void StartCad( void );	
-	
-	/*!
+    virtual void StartCad( void );    
+    
+    /*!
      * @brief Reads the current RSSI value
      *
      * @retval rssiValue Current RSSI value in [dBm]
      */
     virtual int16_t GetRssi ( ModemType modem );
     
-	/*!
+    /*!
      * @brief Writes the radio register at the specified address
      *
      * @param [IN]: addr Register address
@@ -291,7 +300,7 @@
      */
     virtual void Write ( uint8_t addr, uint8_t data ) = 0;
     
-	/*!
+    /*!
      * @brief Reads the radio register at the specified address
      *
      * @param [IN]: addr Register address
@@ -299,7 +308,7 @@
      */
     virtual uint8_t Read ( uint8_t addr ) = 0;
     
-	/*!
+    /*!
      * @brief Writes multiple radio registers starting at address
      *
      * @param [IN] addr   First Radio register address
@@ -308,7 +317,7 @@
      */
     virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0;
     
-	/*!
+    /*!
      * @brief Reads multiple radio registers starting at address
      *
      * @param [IN] addr First Radio register address
@@ -316,98 +325,98 @@
      * @param [IN] size Number of registers to be read
      */
     virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0;
-	
-	/*!
-	 * @brief Writes the buffer contents to the SX1276 FIFO
-	 *
-	 * @param [IN] buffer Buffer containing data to be put on the FIFO.
-	 * @param [IN] size Number of bytes to be written to the FIFO
-	 */
-	virtual void WriteFifo( uint8_t *buffer, uint8_t size ) = 0;
+    
+    /*!
+     * @brief Writes the buffer contents to the SX1276 FIFO
+     *
+     * @param [IN] buffer Buffer containing data to be put on the FIFO.
+     * @param [IN] size Number of bytes to be written to the FIFO
+     */
+    virtual void WriteFifo( uint8_t *buffer, uint8_t size ) = 0;
 
-	/*!
-	 * @brief Reads the contents of the SX1276 FIFO
-	 *
-	 * @param [OUT] buffer Buffer where to copy the FIFO read data.
-	 * @param [IN] size Number of bytes to be read from the FIFO
-	 */
-	virtual void ReadFifo( uint8_t *buffer, uint8_t size ) = 0;
-	/*!
-	 * @brief Resets the SX1276
-	 */
-	virtual void Reset( void ) = 0;
-	
-	//-------------------------------------------------------------------------
-	//						Board relative functions
-	//-------------------------------------------------------------------------
-	
+    /*!
+     * @brief Reads the contents of the SX1276 FIFO
+     *
+     * @param [OUT] buffer Buffer where to copy the FIFO read data.
+     * @param [IN] size Number of bytes to be read from the FIFO
+     */
+    virtual void ReadFifo( uint8_t *buffer, uint8_t size ) = 0;
+    /*!
+     * @brief Resets the SX1276
+     */
+    virtual void Reset( void ) = 0;
+    
+    //-------------------------------------------------------------------------
+    //                        Board relative functions
+    //-------------------------------------------------------------------------
+    
 protected:
-	/*!
-	 * @brief Initializes the radio I/Os pins interface
-	 */
-	virtual void IoInit( void ) = 0;
-	
-	/*!
-	 *	@brief Initializes the radio registers
-	 */
-	virtual void RadioRegistersInit( ) = 0;
-	
-	/*!
-	 * @brief Initializes the radio SPI
-	 */
-	virtual void SpiInit( void ) = 0;
-	
-	/*!
-	 * @brief Initializes DIO IRQ handlers
-	 *
-	 * @param [IN] irqHandlers Array containing the IRQ callback functions
-	 */
-	virtual void IoIrqInit( DioIrqHandler *irqHandlers ) = 0;
+    /*!
+     * @brief Initializes the radio I/Os pins interface
+     */
+    virtual void IoInit( void ) = 0;
+    
+    /*!
+     *    @brief Initializes the radio registers
+     */
+    virtual void RadioRegistersInit( ) = 0;
+    
+    /*!
+     * @brief Initializes the radio SPI
+     */
+    virtual void SpiInit( void ) = 0;
+    
+    /*!
+     * @brief Initializes DIO IRQ handlers
+     *
+     * @param [IN] irqHandlers Array containing the IRQ callback functions
+     */
+    virtual void IoIrqInit( DioIrqHandler *irqHandlers ) = 0;
 
-	/*!
-	 * @brief De-initializes the radio I/Os pins interface. 
-	 *
-	 * \remark Useful when going in MCU lowpower modes
-	 */
-	virtual void IoDeInit( void ) = 0;
+    /*!
+     * @brief De-initializes the radio I/Os pins interface. 
+     *
+     * \remark Useful when going in MCU lowpower modes
+     */
+    virtual void IoDeInit( void ) = 0;
 
-	/*!
-	 * @brief Gets the board PA selection configuration
-	 *
-	 * @param [IN] channel Channel frequency in Hz
-	 * @retval PaSelect RegPaConfig PaSelect value
-	 */
-	virtual uint8_t GetPaSelect( uint32_t channel ) = 0;
+    /*!
+     * @brief Gets the board PA selection configuration
+     *
+     * @param [IN] channel Channel frequency in Hz
+     * @retval PaSelect RegPaConfig PaSelect value
+     */
+    virtual uint8_t GetPaSelect( uint32_t channel ) = 0;
 
-	/*!
-	 * @brief Set the RF Switch I/Os pins in Low Power mode
-	 *
-	 * @param [IN] status enable or disable
-	 */
-	virtual void SetAntSwLowPower( bool status ) = 0;
+    /*!
+     * @brief Set the RF Switch I/Os pins in Low Power mode
+     *
+     * @param [IN] status enable or disable
+     */
+    virtual void SetAntSwLowPower( bool status ) = 0;
 
-	/*!
-	 * @brief Initializes the RF Switch I/Os pins interface
-	 */
-	virtual void AntSwInit( void ) = 0;
+    /*!
+     * @brief Initializes the RF Switch I/Os pins interface
+     */
+    virtual void AntSwInit( void ) = 0;
 
-	/*!
-	 * @brief De-initializes the RF Switch I/Os pins interface 
-	 *
-	 * \remark Needed to decrease the power consumption in MCU lowpower modes
-	 */
-	virtual void AntSwDeInit( void ) = 0;
+    /*!
+     * @brief De-initializes the RF Switch I/Os pins interface 
+     *
+     * \remark Needed to decrease the power consumption in MCU lowpower modes
+     */
+    virtual void AntSwDeInit( void ) = 0;
 
-	/*!
-	 * @brief Controls the antena switch if necessary.
-	 *
-	 * \remark see errata note
-	 *
-	 * @param [IN] rxTx [1: Tx, 0: Rx]
-	 */
-	virtual void SetAntSw( uint8_t rxTx ) = 0;
-	
-	/*!
+    /*!
+     * @brief Controls the antena switch if necessary.
+     *
+     * \remark see errata note
+     *
+     * @param [IN] rxTx [1: Tx, 0: Rx]
+     */
+    virtual void SetAntSw( uint8_t rxTx ) = 0;
+    
+    /*!
      * @brief Checks if the given RF frequency is supported by the hardware
      *
      * @param [IN] frequency RF frequency to be checked
@@ -416,66 +425,59 @@
     virtual bool CheckRfFrequency( uint32_t frequency ) = 0;
 protected:
 
-	/*!
-	 * @brief Sets the SX1276 operating mode
-	 *
-	 * @param [IN] opMode New operating mode
-	 */
-	virtual void SetOpMode( uint8_t opMode );
+    /*!
+     * @brief Sets the SX1276 operating mode
+     *
+     * @param [IN] opMode New operating mode
+     */
+    virtual void SetOpMode( uint8_t opMode );
 
-	/*!
-	 * @brief Configures the SX1276 with the given modem
-	 *
-	 * @param [IN] modem Modem to be used [0: FSK, 1: LoRa] 
-	 */
-	virtual void SetModem( ModemType modem );
+    /*
+     * SX1276 DIO IRQ callback functions prototype
+     */
 
-	/*
-	 * SX1276 DIO IRQ callback functions prototype
-	 */
+    /*!
+     * @brief DIO 0 IRQ callback
+     */
+    virtual void OnDio0Irq( void );
 
-	/*!
-	 * @brief DIO 0 IRQ callback
-	 */
-	virtual void OnDio0Irq( void );
+    /*!
+     * @brief DIO 1 IRQ callback
+     */
+    virtual void OnDio1Irq( void );
 
-	/*!
-	 * @brief DIO 1 IRQ callback
-	 */
-	virtual void OnDio1Irq( void );
+    /*!
+     * @brief DIO 2 IRQ callback
+     */
+    virtual void OnDio2Irq( void );
 
-	/*!
-	 * @brief DIO 2 IRQ callback
-	 */
-	virtual void OnDio2Irq( void );
+    /*!
+     * @brief DIO 3 IRQ callback
+     */
+    virtual void OnDio3Irq( void );
 
-	/*!
-	 * @brief DIO 3 IRQ callback
-	 */
-	virtual void OnDio3Irq( void );
-
-	/*!
-	 * @brief DIO 4 IRQ callback
-	 */
-	virtual void OnDio4Irq( void );
+    /*!
+     * @brief DIO 4 IRQ callback
+     */
+    virtual void OnDio4Irq( void );
 
-	/*!
-	 * @brief DIO 5 IRQ callback
-	 */
-	virtual void OnDio5Irq( void );
+    /*!
+     * @brief DIO 5 IRQ callback
+     */
+    virtual void OnDio5Irq( void );
 
-	/*!
-	 * @brief Tx & Rx timeout timer callback
-	 */
-	virtual void OnTimeoutIrq( void );
-	
-	/*!
-	 * Returns the known FSK bandwidth registers value
-	 *
-	 * \param [IN] bandwidth Bandwidth value in Hz
-	 * \retval regValue Bandwidth register value.
-	 */
-	static uint8_t GetFskBandwidthRegValue( uint32_t bandwidth );
+    /*!
+     * @brief Tx & Rx timeout timer callback
+     */
+    virtual void OnTimeoutIrq( void );
+    
+    /*!
+     * Returns the known FSK bandwidth registers value
+     *
+     * \param [IN] bandwidth Bandwidth value in Hz
+     * \retval regValue Bandwidth register value.
+     */
+    static uint8_t GetFskBandwidthRegValue( uint32_t bandwidth );
 };
 
 #endif //__SX1276_H__