Initial commit
mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_MODULE_UBLOX_ODIN_W2/system_clock.c@0:bb348c97df44, 2020-09-16 (annotated)
- Committer:
- lypinator
- Date:
- Wed Sep 16 01:11:49 2020 +0000
- Revision:
- 0:bb348c97df44
Added PWM
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
lypinator | 0:bb348c97df44 | 1 | /* mbed Microcontroller Library |
lypinator | 0:bb348c97df44 | 2 | * Copyright (c) 2006-2017 ARM Limited |
lypinator | 0:bb348c97df44 | 3 | * |
lypinator | 0:bb348c97df44 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
lypinator | 0:bb348c97df44 | 5 | * you may not use this file except in compliance with the License. |
lypinator | 0:bb348c97df44 | 6 | * You may obtain a copy of the License at |
lypinator | 0:bb348c97df44 | 7 | * |
lypinator | 0:bb348c97df44 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
lypinator | 0:bb348c97df44 | 9 | * |
lypinator | 0:bb348c97df44 | 10 | * Unless required by applicable law or agreed to in writing, software |
lypinator | 0:bb348c97df44 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
lypinator | 0:bb348c97df44 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
lypinator | 0:bb348c97df44 | 13 | * See the License for the specific language governing permissions and |
lypinator | 0:bb348c97df44 | 14 | * limitations under the License. |
lypinator | 0:bb348c97df44 | 15 | */ |
lypinator | 0:bb348c97df44 | 16 | |
lypinator | 0:bb348c97df44 | 17 | /** |
lypinator | 0:bb348c97df44 | 18 | * This file configures the system clock as follows: |
lypinator | 0:bb348c97df44 | 19 | *-------------------------------------------------------------------------------------- |
lypinator | 0:bb348c97df44 | 20 | * System clock source | PLL_HSE_XTAL | PLL_HSE_XTAL |
lypinator | 0:bb348c97df44 | 21 | * | (external 8 MHz clock) | (external 8 MHz clock) |
lypinator | 0:bb348c97df44 | 22 | *-------------------------------------------------------------------------------------- |
lypinator | 0:bb348c97df44 | 23 | * SYSCLK(MHz) | 168 | 180 |
lypinator | 0:bb348c97df44 | 24 | *-------------------------------------------------------------------------------------- |
lypinator | 0:bb348c97df44 | 25 | * AHBCLK (MHz) | 168 | 180 |
lypinator | 0:bb348c97df44 | 26 | *-------------------------------------------------------------------------------------- |
lypinator | 0:bb348c97df44 | 27 | * APB1CLK (MHz) | 42 | 45 |
lypinator | 0:bb348c97df44 | 28 | *-------------------------------------------------------------------------------------- |
lypinator | 0:bb348c97df44 | 29 | * APB2CLK (MHz) | 84 | 90 |
lypinator | 0:bb348c97df44 | 30 | *-------------------------------------------------------------------------------------- |
lypinator | 0:bb348c97df44 | 31 | * USB capable (48 MHz precise clock) | YES | NO |
lypinator | 0:bb348c97df44 | 32 | *-------------------------------------------------------------------------------------- |
lypinator | 0:bb348c97df44 | 33 | **/ |
lypinator | 0:bb348c97df44 | 34 | |
lypinator | 0:bb348c97df44 | 35 | #include "stm32f4xx.h" |
lypinator | 0:bb348c97df44 | 36 | #include "nvic_addr.h" |
lypinator | 0:bb348c97df44 | 37 | |
lypinator | 0:bb348c97df44 | 38 | |
lypinator | 0:bb348c97df44 | 39 | /* Select the SYSCLOCK to start with (0=OFF, 1=ON) */ |
lypinator | 0:bb348c97df44 | 40 | #define USE_SYSCLOCK_168 (1) /* Use external 8MHz xtal and sets SYSCLK to 168MHz */ |
lypinator | 0:bb348c97df44 | 41 | #define USE_SYSCLOCK_180 (0) /* Use external 8MHz xtal and sets SYSCLK to 180MHz */ |
lypinator | 0:bb348c97df44 | 42 | |
lypinator | 0:bb348c97df44 | 43 | |
lypinator | 0:bb348c97df44 | 44 | void SetSysClock(void); |
lypinator | 0:bb348c97df44 | 45 | |
lypinator | 0:bb348c97df44 | 46 | /** |
lypinator | 0:bb348c97df44 | 47 | * @brief Setup the microcontroller system |
lypinator | 0:bb348c97df44 | 48 | * Initialize the FPU setting, vector table location and External memory |
lypinator | 0:bb348c97df44 | 49 | * configuration. |
lypinator | 0:bb348c97df44 | 50 | * @param None |
lypinator | 0:bb348c97df44 | 51 | * @retval None |
lypinator | 0:bb348c97df44 | 52 | */ |
lypinator | 0:bb348c97df44 | 53 | void SystemInit(void) |
lypinator | 0:bb348c97df44 | 54 | { |
lypinator | 0:bb348c97df44 | 55 | /* FPU settings ------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 56 | #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) |
lypinator | 0:bb348c97df44 | 57 | SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); /* set CP10 and CP11 Full Access */ |
lypinator | 0:bb348c97df44 | 58 | #endif |
lypinator | 0:bb348c97df44 | 59 | /* Reset the RCC clock configuration to the default reset state ------------*/ |
lypinator | 0:bb348c97df44 | 60 | /* Set HSION bit */ |
lypinator | 0:bb348c97df44 | 61 | RCC->CR |= (uint32_t)0x00000001; |
lypinator | 0:bb348c97df44 | 62 | |
lypinator | 0:bb348c97df44 | 63 | /* Reset CFGR register */ |
lypinator | 0:bb348c97df44 | 64 | RCC->CFGR = 0x00000000; |
lypinator | 0:bb348c97df44 | 65 | |
lypinator | 0:bb348c97df44 | 66 | /* Reset HSEON, CSSON and PLLON bits */ |
lypinator | 0:bb348c97df44 | 67 | RCC->CR &= (uint32_t)0xFEF6FFFF; |
lypinator | 0:bb348c97df44 | 68 | |
lypinator | 0:bb348c97df44 | 69 | /* Reset PLLCFGR register */ |
lypinator | 0:bb348c97df44 | 70 | RCC->PLLCFGR = 0x24003010; |
lypinator | 0:bb348c97df44 | 71 | |
lypinator | 0:bb348c97df44 | 72 | /* Reset HSEBYP bit */ |
lypinator | 0:bb348c97df44 | 73 | RCC->CR &= (uint32_t)0xFFFBFFFF; |
lypinator | 0:bb348c97df44 | 74 | |
lypinator | 0:bb348c97df44 | 75 | /* Disable all interrupts */ |
lypinator | 0:bb348c97df44 | 76 | RCC->CIR = 0x00000000; |
lypinator | 0:bb348c97df44 | 77 | |
lypinator | 0:bb348c97df44 | 78 | #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) |
lypinator | 0:bb348c97df44 | 79 | SystemInit_ExtMemCtl(); |
lypinator | 0:bb348c97df44 | 80 | #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ |
lypinator | 0:bb348c97df44 | 81 | |
lypinator | 0:bb348c97df44 | 82 | /* Configure the Vector Table location add offset address ------------------*/ |
lypinator | 0:bb348c97df44 | 83 | #ifdef VECT_TAB_SRAM |
lypinator | 0:bb348c97df44 | 84 | SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ |
lypinator | 0:bb348c97df44 | 85 | #else |
lypinator | 0:bb348c97df44 | 86 | SCB->VTOR = NVIC_FLASH_VECTOR_ADDRESS; /* Vector Table Relocation in Internal FLASH */ |
lypinator | 0:bb348c97df44 | 87 | #endif |
lypinator | 0:bb348c97df44 | 88 | |
lypinator | 0:bb348c97df44 | 89 | } |
lypinator | 0:bb348c97df44 | 90 | |
lypinator | 0:bb348c97df44 | 91 | |
lypinator | 0:bb348c97df44 | 92 | /** System Clock Configuration |
lypinator | 0:bb348c97df44 | 93 | */ |
lypinator | 0:bb348c97df44 | 94 | #if USE_SYSCLOCK_168 != 0 |
lypinator | 0:bb348c97df44 | 95 | /* |
lypinator | 0:bb348c97df44 | 96 | * generated code by STM32CubeMX 4.4.0 for board 32F429Discovery |
lypinator | 0:bb348c97df44 | 97 | * and SYSCLK=168MHZ |
lypinator | 0:bb348c97df44 | 98 | */ |
lypinator | 0:bb348c97df44 | 99 | void SetSysClock(void) |
lypinator | 0:bb348c97df44 | 100 | { |
lypinator | 0:bb348c97df44 | 101 | |
lypinator | 0:bb348c97df44 | 102 | RCC_OscInitTypeDef RCC_OscInitStruct; |
lypinator | 0:bb348c97df44 | 103 | RCC_ClkInitTypeDef RCC_ClkInitStruct; |
lypinator | 0:bb348c97df44 | 104 | |
lypinator | 0:bb348c97df44 | 105 | __HAL_RCC_PWR_CLK_ENABLE(); |
lypinator | 0:bb348c97df44 | 106 | |
lypinator | 0:bb348c97df44 | 107 | __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); |
lypinator | 0:bb348c97df44 | 108 | |
lypinator | 0:bb348c97df44 | 109 | RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; |
lypinator | 0:bb348c97df44 | 110 | RCC_OscInitStruct.HSEState = RCC_HSE_ON; |
lypinator | 0:bb348c97df44 | 111 | RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; |
lypinator | 0:bb348c97df44 | 112 | RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; |
lypinator | 0:bb348c97df44 | 113 | RCC_OscInitStruct.PLL.PLLM = 24; |
lypinator | 0:bb348c97df44 | 114 | RCC_OscInitStruct.PLL.PLLN = 336; |
lypinator | 0:bb348c97df44 | 115 | RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; |
lypinator | 0:bb348c97df44 | 116 | RCC_OscInitStruct.PLL.PLLQ = 7; |
lypinator | 0:bb348c97df44 | 117 | HAL_RCC_OscConfig(&RCC_OscInitStruct); |
lypinator | 0:bb348c97df44 | 118 | |
lypinator | 0:bb348c97df44 | 119 | RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 |
lypinator | 0:bb348c97df44 | 120 | | RCC_CLOCKTYPE_PCLK2; |
lypinator | 0:bb348c97df44 | 121 | RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; |
lypinator | 0:bb348c97df44 | 122 | RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; |
lypinator | 0:bb348c97df44 | 123 | RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; |
lypinator | 0:bb348c97df44 | 124 | RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; |
lypinator | 0:bb348c97df44 | 125 | HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); |
lypinator | 0:bb348c97df44 | 126 | |
lypinator | 0:bb348c97df44 | 127 | // HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_3); |
lypinator | 0:bb348c97df44 | 128 | |
lypinator | 0:bb348c97df44 | 129 | |
lypinator | 0:bb348c97df44 | 130 | } |
lypinator | 0:bb348c97df44 | 131 | |
lypinator | 0:bb348c97df44 | 132 | #elif USE_SYSCLOCK_180 != 0 |
lypinator | 0:bb348c97df44 | 133 | /* |
lypinator | 0:bb348c97df44 | 134 | * generated code by STM32CubeMX 4.4.0 for board 32F429Discovery |
lypinator | 0:bb348c97df44 | 135 | * and SYSCLK=180MHZ |
lypinator | 0:bb348c97df44 | 136 | */ |
lypinator | 0:bb348c97df44 | 137 | void SetSysClock(void) |
lypinator | 0:bb348c97df44 | 138 | { |
lypinator | 0:bb348c97df44 | 139 | |
lypinator | 0:bb348c97df44 | 140 | RCC_OscInitTypeDef RCC_OscInitStruct; |
lypinator | 0:bb348c97df44 | 141 | RCC_ClkInitTypeDef RCC_ClkInitStruct; |
lypinator | 0:bb348c97df44 | 142 | |
lypinator | 0:bb348c97df44 | 143 | __HAL_RCC_PWR_CLK_ENABLE(); |
lypinator | 0:bb348c97df44 | 144 | |
lypinator | 0:bb348c97df44 | 145 | __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); |
lypinator | 0:bb348c97df44 | 146 | |
lypinator | 0:bb348c97df44 | 147 | RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; |
lypinator | 0:bb348c97df44 | 148 | RCC_OscInitStruct.HSEState = RCC_HSE_ON; |
lypinator | 0:bb348c97df44 | 149 | RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; |
lypinator | 0:bb348c97df44 | 150 | RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; |
lypinator | 0:bb348c97df44 | 151 | RCC_OscInitStruct.PLL.PLLM = 8; |
lypinator | 0:bb348c97df44 | 152 | RCC_OscInitStruct.PLL.PLLN = 360; |
lypinator | 0:bb348c97df44 | 153 | RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; |
lypinator | 0:bb348c97df44 | 154 | RCC_OscInitStruct.PLL.PLLQ = 7; |
lypinator | 0:bb348c97df44 | 155 | HAL_RCC_OscConfig(&RCC_OscInitStruct); |
lypinator | 0:bb348c97df44 | 156 | |
lypinator | 0:bb348c97df44 | 157 | HAL_PWREx_EnableOverDrive(); |
lypinator | 0:bb348c97df44 | 158 | |
lypinator | 0:bb348c97df44 | 159 | RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 |
lypinator | 0:bb348c97df44 | 160 | | RCC_CLOCKTYPE_PCLK2; |
lypinator | 0:bb348c97df44 | 161 | RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; |
lypinator | 0:bb348c97df44 | 162 | RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; |
lypinator | 0:bb348c97df44 | 163 | RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; |
lypinator | 0:bb348c97df44 | 164 | RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; |
lypinator | 0:bb348c97df44 | 165 | HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); |
lypinator | 0:bb348c97df44 | 166 | |
lypinator | 0:bb348c97df44 | 167 | // HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_3); |
lypinator | 0:bb348c97df44 | 168 | |
lypinator | 0:bb348c97df44 | 169 | } |
lypinator | 0:bb348c97df44 | 170 | #endif |