lpc17xx_pinsel.c File Reference
Contains all functions support for Pin connect block firmware library on LPC17xx. More...
Go to the source code of this file.
Functions | |
static void | set_PinFunc (uint8_t portnum, uint8_t pinnum, uint8_t funcnum) |
Setup the pin selection function. | |
static void | set_ResistorMode (uint8_t portnum, uint8_t pinnum, uint8_t modenum) |
Setup resistor mode for each pin. | |
static void | set_OpenDrainMode (uint8_t portnum, uint8_t pinnum, uint8_t modenum) |
Setup Open drain mode for each pin. | |
void | PINSEL_ConfigTraceFunc (FunctionalState NewState) |
Configure trace function. | |
void | PINSEL_SetI2C0Pins (uint8_t i2cPinMode, FunctionalState filterSlewRateEnable) |
Setup I2C0 pins. | |
void | PINSEL_ConfigPin (PINSEL_CFG_Type *PinCfg) |
Configure Pin corresponding to specified parameters passed in the PinCfg. |
Detailed Description
Contains all functions support for Pin connect block firmware library on LPC17xx.
- Version:
- 2.0
- Date:
- 21. May. 2010
Software that is described herein is for illustrative purposes only which provides customers with programming information regarding the products. This software is supplied "AS IS" without any warranties. NXP Semiconductors assumes no responsibility or liability for the use of the software, conveys no license or title under any patent, copyright, or mask work right to the product. NXP Semiconductors reserves the right to make changes in the software without notification. NXP Semiconductors also make no representation or warranty that such application will be suitable for the specified use without further testing or modification.
Definition in file lpc17xx_pinsel.c.
Generated on Thu Jul 14 2022 05:16:18 by 1.7.2