Lukas Formanek
use with LoRa Access Point
Diff: sx1276/sx1276.h
- Revision:
- 13:618826a997e2
- Parent:
- 12:aa5b3bf7fdf4
- Child:
- 16:d447f8d2d2d6
diff -r aa5b3bf7fdf4 -r 618826a997e2 sx1276/sx1276.h
--- a/sx1276/sx1276.h Mon Oct 13 07:33:11 2014 +0000
+++ b/sx1276/sx1276.h Tue Dec 16 10:02:45 2014 +0000
@@ -25,7 +25,7 @@
#define RX_BUFFER_SIZE 256
-#define DEFAULT_TIMEOUT 200 //usec
+#define DEFAULT_TIMEOUT 200 //usec
#define RSSI_OFFSET -139.0
@@ -57,77 +57,84 @@
/*!
* SX1276 DIO pins
*/
- InterruptIn dio0;
- InterruptIn dio1;
- InterruptIn dio2;
- InterruptIn dio3;
- InterruptIn dio4;
- DigitalIn dio5;
-
- bool isRadioActive;
-
- uint8_t boardConnected; //1 = SX1276MB1LAS; 0 = SX1276MB1MAS
-
- uint8_t *rxBuffer;
-
- uint8_t previousOpMode;
-
- /*!
- * Hardware DIO IRQ functions
- */
- DioIrqHandler *dioIrq;
-
- /*!
- * Tx and Rx timers
- */
- Timeout txTimeoutTimer;
- Timeout rxTimeoutTimer;
- Timeout rxTimeoutSyncWord;
-
- /*!
- * rxTx: [1: Tx, 0: Rx]
- */
- uint8_t rxTx;
-
- RadioSettings_t settings;
-
- static const FskBandwidth_t FskBandwidths[] ;
+ InterruptIn dio0;
+ InterruptIn dio1;
+ InterruptIn dio2;
+ InterruptIn dio3;
+ InterruptIn dio4;
+ DigitalIn dio5;
+
+ bool isRadioActive;
+
+ uint8_t boardConnected; //1 = SX1276MB1LAS; 0 = SX1276MB1MAS
+
+ uint8_t *rxBuffer;
+
+ uint8_t previousOpMode;
+
+ /*!
+ * Hardware DIO IRQ functions
+ */
+ DioIrqHandler *dioIrq;
+
+ /*!
+ * Tx and Rx timers
+ */
+ Timeout txTimeoutTimer;
+ Timeout rxTimeoutTimer;
+ Timeout rxTimeoutSyncWord;
+
+ /*!
+ * rxTx: [1: Tx, 0: Rx]
+ */
+ uint8_t rxTx;
+
+ RadioSettings_t settings;
+
+ static const FskBandwidth_t FskBandwidths[] ;
protected:
- /*!
- * Performs the Rx chain calibration for LF and HF bands
- * \remark Must be called just after the reset so all registers are at their
- * default values
- */
- void RxChainCalibration( void );
+ /*!
+ * Performs the Rx chain calibration for LF and HF bands
+ * \remark Must be called just after the reset so all registers are at their
+ * default values
+ */
+ void RxChainCalibration( void );
public:
- SX1276( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ),
- void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool ChannelActivityDetected ),
- PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
+ SX1276( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ),
+ void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool channelActivityDetected ),
+ PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5 );
SX1276( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ),
- void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool ChannelActivityDetected ) );
- virtual ~SX1276( );
-
- //-------------------------------------------------------------------------
- // Redefined Radio functions
- //-------------------------------------------------------------------------
- /*!
+ void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool channelActivityDetected ) );
+ virtual ~SX1276( );
+
+ //-------------------------------------------------------------------------
+ // Redefined Radio functions
+ //-------------------------------------------------------------------------
+ /*!
* Return current radio status
*
* @param status Radio status. [IDLE, RX_RUNNING, TX_RUNNING]
*/
virtual RadioState GetState( void );
- /*!
+ /*!
+ * @brief Configures the SX1276 with the given modem
+ *
+ * @param [IN] modem Modem to be used [0: FSK, 1: LoRa]
+ */
+ virtual void SetModem( ModemType modem );
+
+ /*!
* @brief Sets the channel frequency
*
* @param [IN] freq Channel RF frequency
*/
virtual void SetChannel( uint32_t freq );
- /*!
+ /*!
* @brief Sets the channels configuration
*
* @param [IN] modem Radio modem to be used [0: FSK, 1: LoRa]
@@ -138,7 +145,7 @@
*/
virtual bool IsChannelFree( ModemType modem, uint32_t freq, int8_t rssiThresh );
- /*!
+ /*!
* @brief Generates a 32 bits random value based on the RSSI readings
*
* \remark This function sets the radio in LoRa modem mode and disables
@@ -150,7 +157,7 @@
*/
virtual uint32_t Random( void );
- /*!
+ /*!
* @brief Sets the reception parameters
*
* @param [IN] modem Radio modem to be used [0: FSK, 1: LoRa]
@@ -175,9 +182,10 @@
* FSK : N/A ( set to 0 )
* LoRa: timeout in symbols
* @param [IN] fixLen Fixed length packets [0: variable, 1: fixed]
+ * @param [IN] payloadLen Sets payload length when fixed lenght is used
* @param [IN] crcOn Enables/Disables the CRC [0: OFF, 1: ON]
- * @param [IN] FreqHopOn Enables disables the intra-packet frequency hopping [0: OFF, 1: ON] (LoRa only)
- * @param [IN] HopPeriod Number of symbols bewteen each hop (LoRa only)
+ * @param [IN] freqHopOn Enables disables the intra-packet frequency hopping [0: OFF, 1: ON] (LoRa only)
+ * @param [IN] hopPeriod Number of symbols bewteen each hop (LoRa only)
* @param [IN] iqInverted Inverts IQ signals ( LoRa only )
* FSK : N/A ( set to 0 )
* LoRa: [0: not inverted, 1: inverted]
@@ -188,10 +196,11 @@
uint32_t datarate, uint8_t coderate,
uint32_t bandwidthAfc, uint16_t preambleLen,
uint16_t symbTimeout, bool fixLen,
- bool crcOn, bool FreqHopOn, uint8_t HopPeriod,
+ uint8_t payloadLen,
+ bool crcOn, bool freqHopOn, uint8_t hopPeriod,
bool iqInverted, bool rxContinuous );
- /*!
+ /*!
* @brief Sets the transmission parameters
*
* @param [IN] modem Radio modem to be used [0: FSK, 1: LoRa]
@@ -213,8 +222,8 @@
* @param [IN] preambleLen Sets the preamble length
* @param [IN] fixLen Fixed length packets [0: variable, 1: fixed]
* @param [IN] crcOn Enables disables the CRC [0: OFF, 1: ON]
- * @param [IN] FreqHopOn Enables disables the intra-packet frequency hopping [0: OFF, 1: ON] (LoRa only)
- * @param [IN] HopPeriod Number of symbols bewteen each hop (LoRa only)
+ * @param [IN] freqHopOn Enables disables the intra-packet frequency hopping [0: OFF, 1: ON] (LoRa only)
+ * @param [IN] hopPeriod Number of symbols bewteen each hop (LoRa only)
* @param [IN] iqInverted Inverts IQ signals ( LoRa only )
* FSK : N/A ( set to 0 )
* LoRa: [0: not inverted, 1: inverted]
@@ -223,10 +232,10 @@
virtual void SetTxConfig( ModemType modem, int8_t power, uint32_t fdev,
uint32_t bandwidth, uint32_t datarate,
uint8_t coderate, uint16_t preambleLen,
- bool fixLen, bool crcOn, bool FreqHopOn,
- uint8_t HopPeriod, bool iqInverted, uint32_t timeout );
+ bool fixLen, bool crcOn, bool freqHopOn,
+ uint8_t hopPeriod, bool iqInverted, uint32_t timeout );
- /*!
+ /*!
* @brief Computes the packet time on air for the given payload
*
* \Remark Can only be called once SetRxConfig or SetTxConfig have been called
@@ -238,7 +247,7 @@
*/
virtual double TimeOnAir ( ModemType modem, uint8_t pktLen );
- /*!
+ /*!
* @brief Sends the buffer of size. Prepares the packet to be sent and sets
* the radio in transmission
*
@@ -247,43 +256,43 @@
*/
virtual void Send( uint8_t *buffer, uint8_t size );
- /*!
+ /*!
* @brief Sets the radio in sleep mode
*/
virtual void Sleep( void );
- /*!
+ /*!
* @brief Sets the radio in standby mode
*/
virtual void Standby( void );
- /*!
+ /*!
* @brief Sets the radio in reception mode for the given time
* @param [IN] timeout Reception timeout [us]
* [0: continuous, others timeout]
*/
virtual void Rx( uint32_t timeout );
- /*!
+ /*!
* @brief Sets the radio in transmission mode for the given time
* @param [IN] timeout Transmission timeout [us]
* [0: continuous, others timeout]
*/
virtual void Tx( uint32_t timeout );
- /*!
+ /*!
* @brief Start a Channel Activity Detection
*/
- virtual void StartCad( void );
-
- /*!
+ virtual void StartCad( void );
+
+ /*!
* @brief Reads the current RSSI value
*
* @retval rssiValue Current RSSI value in [dBm]
*/
virtual int16_t GetRssi ( ModemType modem );
- /*!
+ /*!
* @brief Writes the radio register at the specified address
*
* @param [IN]: addr Register address
@@ -291,7 +300,7 @@
*/
virtual void Write ( uint8_t addr, uint8_t data ) = 0;
- /*!
+ /*!
* @brief Reads the radio register at the specified address
*
* @param [IN]: addr Register address
@@ -299,7 +308,7 @@
*/
virtual uint8_t Read ( uint8_t addr ) = 0;
- /*!
+ /*!
* @brief Writes multiple radio registers starting at address
*
* @param [IN] addr First Radio register address
@@ -308,7 +317,7 @@
*/
virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0;
- /*!
+ /*!
* @brief Reads multiple radio registers starting at address
*
* @param [IN] addr First Radio register address
@@ -316,98 +325,98 @@
* @param [IN] size Number of registers to be read
*/
virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0;
-
- /*!
- * @brief Writes the buffer contents to the SX1276 FIFO
- *
- * @param [IN] buffer Buffer containing data to be put on the FIFO.
- * @param [IN] size Number of bytes to be written to the FIFO
- */
- virtual void WriteFifo( uint8_t *buffer, uint8_t size ) = 0;
+
+ /*!
+ * @brief Writes the buffer contents to the SX1276 FIFO
+ *
+ * @param [IN] buffer Buffer containing data to be put on the FIFO.
+ * @param [IN] size Number of bytes to be written to the FIFO
+ */
+ virtual void WriteFifo( uint8_t *buffer, uint8_t size ) = 0;
- /*!
- * @brief Reads the contents of the SX1276 FIFO
- *
- * @param [OUT] buffer Buffer where to copy the FIFO read data.
- * @param [IN] size Number of bytes to be read from the FIFO
- */
- virtual void ReadFifo( uint8_t *buffer, uint8_t size ) = 0;
- /*!
- * @brief Resets the SX1276
- */
- virtual void Reset( void ) = 0;
-
- //-------------------------------------------------------------------------
- // Board relative functions
- //-------------------------------------------------------------------------
-
+ /*!
+ * @brief Reads the contents of the SX1276 FIFO
+ *
+ * @param [OUT] buffer Buffer where to copy the FIFO read data.
+ * @param [IN] size Number of bytes to be read from the FIFO
+ */
+ virtual void ReadFifo( uint8_t *buffer, uint8_t size ) = 0;
+ /*!
+ * @brief Resets the SX1276
+ */
+ virtual void Reset( void ) = 0;
+
+ //-------------------------------------------------------------------------
+ // Board relative functions
+ //-------------------------------------------------------------------------
+
protected:
- /*!
- * @brief Initializes the radio I/Os pins interface
- */
- virtual void IoInit( void ) = 0;
-
- /*!
- * @brief Initializes the radio registers
- */
- virtual void RadioRegistersInit( ) = 0;
-
- /*!
- * @brief Initializes the radio SPI
- */
- virtual void SpiInit( void ) = 0;
-
- /*!
- * @brief Initializes DIO IRQ handlers
- *
- * @param [IN] irqHandlers Array containing the IRQ callback functions
- */
- virtual void IoIrqInit( DioIrqHandler *irqHandlers ) = 0;
+ /*!
+ * @brief Initializes the radio I/Os pins interface
+ */
+ virtual void IoInit( void ) = 0;
+
+ /*!
+ * @brief Initializes the radio registers
+ */
+ virtual void RadioRegistersInit( ) = 0;
+
+ /*!
+ * @brief Initializes the radio SPI
+ */
+ virtual void SpiInit( void ) = 0;
+
+ /*!
+ * @brief Initializes DIO IRQ handlers
+ *
+ * @param [IN] irqHandlers Array containing the IRQ callback functions
+ */
+ virtual void IoIrqInit( DioIrqHandler *irqHandlers ) = 0;
- /*!
- * @brief De-initializes the radio I/Os pins interface.
- *
- * \remark Useful when going in MCU lowpower modes
- */
- virtual void IoDeInit( void ) = 0;
+ /*!
+ * @brief De-initializes the radio I/Os pins interface.
+ *
+ * \remark Useful when going in MCU lowpower modes
+ */
+ virtual void IoDeInit( void ) = 0;
- /*!
- * @brief Gets the board PA selection configuration
- *
- * @param [IN] channel Channel frequency in Hz
- * @retval PaSelect RegPaConfig PaSelect value
- */
- virtual uint8_t GetPaSelect( uint32_t channel ) = 0;
+ /*!
+ * @brief Gets the board PA selection configuration
+ *
+ * @param [IN] channel Channel frequency in Hz
+ * @retval PaSelect RegPaConfig PaSelect value
+ */
+ virtual uint8_t GetPaSelect( uint32_t channel ) = 0;
- /*!
- * @brief Set the RF Switch I/Os pins in Low Power mode
- *
- * @param [IN] status enable or disable
- */
- virtual void SetAntSwLowPower( bool status ) = 0;
+ /*!
+ * @brief Set the RF Switch I/Os pins in Low Power mode
+ *
+ * @param [IN] status enable or disable
+ */
+ virtual void SetAntSwLowPower( bool status ) = 0;
- /*!
- * @brief Initializes the RF Switch I/Os pins interface
- */
- virtual void AntSwInit( void ) = 0;
+ /*!
+ * @brief Initializes the RF Switch I/Os pins interface
+ */
+ virtual void AntSwInit( void ) = 0;
- /*!
- * @brief De-initializes the RF Switch I/Os pins interface
- *
- * \remark Needed to decrease the power consumption in MCU lowpower modes
- */
- virtual void AntSwDeInit( void ) = 0;
+ /*!
+ * @brief De-initializes the RF Switch I/Os pins interface
+ *
+ * \remark Needed to decrease the power consumption in MCU lowpower modes
+ */
+ virtual void AntSwDeInit( void ) = 0;
- /*!
- * @brief Controls the antena switch if necessary.
- *
- * \remark see errata note
- *
- * @param [IN] rxTx [1: Tx, 0: Rx]
- */
- virtual void SetAntSw( uint8_t rxTx ) = 0;
-
- /*!
+ /*!
+ * @brief Controls the antena switch if necessary.
+ *
+ * \remark see errata note
+ *
+ * @param [IN] rxTx [1: Tx, 0: Rx]
+ */
+ virtual void SetAntSw( uint8_t rxTx ) = 0;
+
+ /*!
* @brief Checks if the given RF frequency is supported by the hardware
*
* @param [IN] frequency RF frequency to be checked
@@ -416,66 +425,59 @@
virtual bool CheckRfFrequency( uint32_t frequency ) = 0;
protected:
- /*!
- * @brief Sets the SX1276 operating mode
- *
- * @param [IN] opMode New operating mode
- */
- virtual void SetOpMode( uint8_t opMode );
+ /*!
+ * @brief Sets the SX1276 operating mode
+ *
+ * @param [IN] opMode New operating mode
+ */
+ virtual void SetOpMode( uint8_t opMode );
- /*!
- * @brief Configures the SX1276 with the given modem
- *
- * @param [IN] modem Modem to be used [0: FSK, 1: LoRa]
- */
- virtual void SetModem( ModemType modem );
+ /*
+ * SX1276 DIO IRQ callback functions prototype
+ */
- /*
- * SX1276 DIO IRQ callback functions prototype
- */
+ /*!
+ * @brief DIO 0 IRQ callback
+ */
+ virtual void OnDio0Irq( void );
- /*!
- * @brief DIO 0 IRQ callback
- */
- virtual void OnDio0Irq( void );
+ /*!
+ * @brief DIO 1 IRQ callback
+ */
+ virtual void OnDio1Irq( void );
- /*!
- * @brief DIO 1 IRQ callback
- */
- virtual void OnDio1Irq( void );
+ /*!
+ * @brief DIO 2 IRQ callback
+ */
+ virtual void OnDio2Irq( void );
- /*!
- * @brief DIO 2 IRQ callback
- */
- virtual void OnDio2Irq( void );
+ /*!
+ * @brief DIO 3 IRQ callback
+ */
+ virtual void OnDio3Irq( void );
- /*!
- * @brief DIO 3 IRQ callback
- */
- virtual void OnDio3Irq( void );
-
- /*!
- * @brief DIO 4 IRQ callback
- */
- virtual void OnDio4Irq( void );
+ /*!
+ * @brief DIO 4 IRQ callback
+ */
+ virtual void OnDio4Irq( void );
- /*!
- * @brief DIO 5 IRQ callback
- */
- virtual void OnDio5Irq( void );
+ /*!
+ * @brief DIO 5 IRQ callback
+ */
+ virtual void OnDio5Irq( void );
- /*!
- * @brief Tx & Rx timeout timer callback
- */
- virtual void OnTimeoutIrq( void );
-
- /*!
- * Returns the known FSK bandwidth registers value
- *
- * \param [IN] bandwidth Bandwidth value in Hz
- * \retval regValue Bandwidth register value.
- */
- static uint8_t GetFskBandwidthRegValue( uint32_t bandwidth );
+ /*!
+ * @brief Tx & Rx timeout timer callback
+ */
+ virtual void OnTimeoutIrq( void );
+
+ /*!
+ * Returns the known FSK bandwidth registers value
+ *
+ * \param [IN] bandwidth Bandwidth value in Hz
+ * \retval regValue Bandwidth register value.
+ */
+ static uint8_t GetFskBandwidthRegValue( uint32_t bandwidth );
};
#endif //__SX1276_H__