Lukas Formanek
use with LoRa Access Point
Diff: sx1276/sx1276.h
- Revision:
- 27:d09a8ef807e2
- Parent:
- 22:7f3aab69cca9
--- a/sx1276/sx1276.h Thu Nov 26 16:55:15 2015 +0000
+++ b/sx1276/sx1276.h Mon Apr 24 09:26:23 2017 +0000
@@ -21,9 +21,20 @@
#include "./typedefs/typedefs.h"
/*!
- * Radio wakeup time from SLEEP mode
+ * Radio wake-up time from sleep
+ */
+#define RADIO_WAKEUP_TIME 1 // [ms]
+
+/*!
+ * Sync word for Private LoRa networks
*/
-#define RADIO_WAKEUP_TIME 1000 // [us]
+#define LORA_MAC_PRIVATE_SYNCWORD 0x12
+
+/*!
+ * Sync word for Public LoRa networks
+ */
+#define LORA_MAC_PUBLIC_SYNCWORD 0x34
+
/*!
* SX1276 definitions
@@ -67,35 +78,28 @@
InterruptIn dio3;
InterruptIn dio4;
DigitalIn dio5;
-
+
bool isRadioActive;
-
+
uint8_t boardConnected; //1 = SX1276MB1LAS; 0 = SX1276MB1MAS
-
- uint8_t *rxBuffer;
-
- uint8_t previousOpMode;
-
+
+ uint8_t *rxtxBuffer;
+
/*!
* Hardware DIO IRQ functions
*/
DioIrqHandler *dioIrq;
-
+
/*!
* Tx and Rx timers
*/
Timeout txTimeoutTimer;
Timeout rxTimeoutTimer;
Timeout rxTimeoutSyncWord;
-
- /*!
- * rxTx: [1: Tx, 0: Rx]
- */
- uint8_t rxTx;
-
+
RadioSettings_t settings;
-
- static const FskBandwidth_t FskBandwidths[] ;
+
+ static const FskBandwidth_t FskBandwidths[];
protected:
/*!
@@ -108,7 +112,7 @@
public:
SX1276( RadioEvents_t *events,
PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
- PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5 );
+ PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5 );
SX1276( RadioEvents_t *events );
virtual ~SX1276( );
@@ -127,21 +131,18 @@
* @param status Radio status. [RF_IDLE, RX_RUNNING, TX_RUNNING]
*/
virtual RadioState GetStatus( void );
-
/*!
* @brief Configures the SX1276 with the given modem
*
* @param [IN] modem Modem to be used [0: FSK, 1: LoRa]
*/
virtual void SetModem( RadioModems_t modem );
-
/*!
* @brief Sets the channel frequency
*
* @param [IN] freq Channel RF frequency
*/
virtual void SetChannel( uint32_t freq );
-
/*!
* @brief Sets the channels configuration
*
@@ -152,7 +153,6 @@
* @retval isFree [true: Channel is free, false: Channel is not free]
*/
virtual bool IsChannelFree( RadioModems_t modem, uint32_t freq, int16_t rssiThresh );
-
/*!
* @brief Generates a 32 bits random value based on the RSSI readings
*
@@ -164,7 +164,6 @@
* @retval randomValue 32 bits random value
*/
virtual uint32_t Random( void );
-
/*!
* @brief Sets the reception parameters
*
@@ -186,8 +185,8 @@
* @param [IN] preambleLen Sets the Preamble length ( LoRa only )
* FSK : N/A ( set to 0 )
* LoRa: Length in symbols ( the hardware adds 4 more symbols )
- * @param [IN] symbTimeout Sets the RxSingle timeout value ( LoRa only )
- * FSK : N/A ( set to 0 )
+ * @param [IN] symbTimeout Sets the RxSingle timeout value
+ * FSK : timeout number of bytes
* LoRa: timeout in symbols
* @param [IN] fixLen Fixed length packets [0: variable, 1: fixed]
* @param [IN] payloadLen Sets payload length when fixed lenght is used
@@ -207,7 +206,6 @@
uint8_t payloadLen,
bool crcOn, bool freqHopOn, uint8_t hopPeriod,
bool iqInverted, bool rxContinuous );
-
/*!
* @brief Sets the transmission parameters
*
@@ -235,14 +233,20 @@
* @param [IN] iqInverted Inverts IQ signals ( LoRa only )
* FSK : N/A ( set to 0 )
* LoRa: [0: not inverted, 1: inverted]
- * @param [IN] timeout Transmission timeout [us]
+ * @param [IN] timeout Transmission timeout [ms]
*/
virtual void SetTxConfig( RadioModems_t modem, int8_t power, uint32_t fdev,
uint32_t bandwidth, uint32_t datarate,
uint8_t coderate, uint16_t preambleLen,
bool fixLen, bool crcOn, bool freqHopOn,
uint8_t hopPeriod, bool iqInverted, uint32_t timeout );
-
+ /*!
+ * @brief Checks if the given RF frequency is supported by the hardware
+ *
+ * @param [IN] frequency RF frequency to be checked
+ * @retval isSupported [true: supported, false: unsupported]
+ */
+ virtual bool CheckRfFrequency( uint32_t frequency ) = 0;
/*!
* @brief Computes the packet time on air for the given payload
*
@@ -253,8 +257,7 @@
*
* @retval airTime Computed airTime for the given packet payload length
*/
- virtual double TimeOnAir ( RadioModems_t modem, uint8_t pktLen );
-
+ virtual uint32_t TimeOnAir ( RadioModems_t modem, uint8_t pktLen );
/*!
* @brief Sends the buffer of size. Prepares the packet to be sent and sets
* the radio in transmission
@@ -263,43 +266,44 @@
* @param [IN]: size Buffer size
*/
virtual void Send( uint8_t *buffer, uint8_t size );
-
/*!
* @brief Sets the radio in sleep mode
*/
virtual void Sleep( void );
-
/*!
* @brief Sets the radio in standby mode
*/
virtual void Standby( void );
-
+ /*!
+ * @brief Sets the radio in CAD mode
+ */
+ virtual void StartCad( void );
/*!
* @brief Sets the radio in reception mode for the given time
- * @param [IN] timeout Reception timeout [us]
+ * @param [IN] timeout Reception timeout [ms]
* [0: continuous, others timeout]
*/
virtual void Rx( uint32_t timeout );
-
/*!
* @brief Sets the radio in transmission mode for the given time
- * @param [IN] timeout Transmission timeout [us]
+ * @param [IN] timeout Transmission timeout [ms]
* [0: continuous, others timeout]
*/
virtual void Tx( uint32_t timeout );
-
/*!
- * @brief Start a Channel Activity Detection
+ * @brief Sets the radio in continuous wave transmission mode
+ *
+ * @param [IN]: freq Channel RF frequency
+ * @param [IN]: power Sets the output power [dBm]
+ * @param [IN]: time Transmission mode timeout [s]
*/
- virtual void StartCad( void );
-
+ virtual void SetTxContinuousWave( uint32_t freq, int8_t power, uint16_t time );
/*!
* @brief Reads the current RSSI value
*
* @retval rssiValue Current RSSI value in [dBm]
*/
virtual int16_t GetRssi ( RadioModems_t modem );
-
/*!
* @brief Writes the radio register at the specified address
*
@@ -307,7 +311,6 @@
* @param [IN]: data New register value
*/
virtual void Write ( uint8_t addr, uint8_t data ) = 0;
-
/*!
* @brief Reads the radio register at the specified address
*
@@ -315,7 +318,6 @@
* @retval data Register value
*/
virtual uint8_t Read ( uint8_t addr ) = 0;
-
/*!
* @brief Writes multiple radio registers starting at address
*
@@ -324,7 +326,6 @@
* @param [IN] size Number of registers to be written
*/
virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0;
-
/*!
* @brief Reads multiple radio registers starting at address
*
@@ -333,7 +334,6 @@
* @param [IN] size Number of registers to be read
*/
virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0;
-
/*!
* @brief Writes the buffer contents to the SX1276 FIFO
*
@@ -341,7 +341,6 @@
* @param [IN] size Number of bytes to be written to the FIFO
*/
virtual void WriteFifo( uint8_t *buffer, uint8_t size ) = 0;
-
/*!
* @brief Reads the contents of the SX1276 FIFO
*
@@ -353,7 +352,7 @@
* @brief Resets the SX1276
*/
virtual void Reset( void ) = 0;
-
+
/*!
* @brief Sets the maximum payload length.
*
@@ -361,11 +360,20 @@
* @param [IN] max Maximum payload length in bytes
*/
virtual void SetMaxPayloadLength( RadioModems_t modem, uint8_t max );
-
+
+ /*!
+ * \brief Sets the network to public or private. Updates the sync byte.
+ *
+ * \remark Applies to LoRa modem only
+ *
+ * \param [IN] enable if true, it enables a public network
+ */
+ virtual void SetPublicNetwork( bool enable );
+
//-------------------------------------------------------------------------
// Board relative functions
//-------------------------------------------------------------------------
-
+
protected:
/*!
* @brief Initializes the radio I/Os pins interface
@@ -381,7 +389,7 @@
* @brief Initializes the radio SPI
*/
virtual void SpiInit( void ) = 0;
-
+
/*!
* @brief Initializes DIO IRQ handlers
*
@@ -397,6 +405,13 @@
virtual void IoDeInit( void ) = 0;
/*!
+ * @brief Sets the radio output power.
+ *
+ * @param [IN] power Sets the RF output power
+ */
+ virtual void SetRfTxPower( int8_t power ) = 0;
+
+ /*!
* @brief Gets the board PA selection configuration
*
* @param [IN] channel Channel frequency in Hz
@@ -424,21 +439,13 @@
virtual void AntSwDeInit( void ) = 0;
/*!
- * @brief Controls the antena switch if necessary.
+ * @brief Controls the antenna switch if necessary.
*
* \remark see errata note
*
- * @param [IN] rxTx [1: Tx, 0: Rx]
+ * @param [IN] opMode Current radio operating mode
*/
- virtual void SetAntSw( uint8_t rxTx ) = 0;
-
- /*!
- * @brief Checks if the given RF frequency is supported by the hardware
- *
- * @param [IN] frequency RF frequency to be checked
- * @retval isSupported [true: supported, false: unsupported]
- */
- virtual bool CheckRfFrequency( uint32_t frequency ) = 0;
+ virtual void SetAntSw( uint8_t opMode ) = 0;
protected:
/*!
@@ -486,7 +493,7 @@
* @brief Tx & Rx timeout timer callback
*/
virtual void OnTimeoutIrq( void );
-
+
/*!
* Returns the known FSK bandwidth registers value
*