Lucian Corduneanu
Multitech xDot Utils
Diff: MultitechDot.cpp
- Revision:
- 4:db99b2a7d062
- Parent:
- 3:7fa5603c10dc
- Child:
- 6:febbdd0d0e55
diff -r 7fa5603c10dc -r db99b2a7d062 MultitechDot.cpp
--- a/MultitechDot.cpp Wed Feb 21 12:52:15 2018 +0200
+++ b/MultitechDot.cpp Mon May 21 18:08:09 2018 +0300
@@ -48,6 +48,9 @@
// to provision your Dot with a 3rd party gateway, see the gateway or network provider documentation
this->update_manual_config(config);
+ // enable or disable Adaptive Data Rate
+ this->setAdr(config->adr);
+
// save changes to configuration
logInfo("saving configuration");
if (!this->saveConfig()) {
@@ -68,411 +71,16 @@
return _config;
}
-void MultitechDot::display_config() {
- // display configuration and library version information
- logInfo("=====================");
- logInfo("general configuration");
- logInfo("=====================");
- logInfo("version ------------------ %s", this->getId().c_str());
- logInfo("device ID/EUI ------------ %s", mts::Text::bin2hexString(this->getDeviceId()).c_str());
- logInfo("frequency band ----------- %s", this->FrequencyBandStr(this->getFrequencyBand()).c_str());
- logInfo("frequency sub band ------- %u", this->getFrequencySubBand());
- logInfo("public network ----------- %s", this->getPublicNetwork() ? "on" : "off");
- logInfo("=========================");
- logInfo("credentials configuration");
- logInfo("=========================");
- logInfo("device class ------------- %s", this->getClass().c_str());
- logInfo("network join mode -------- %s", this->JoinModeStr(this->getJoinMode()).c_str());
- if (this->getJoinMode() == this->MANUAL || this->getJoinMode() == this->PEER_TO_PEER) {
- logInfo("network address ---------- %s", mts::Text::bin2hexString(this->getNetworkAddress()).c_str());
- logInfo("network session key------- %s", mts::Text::bin2hexString(this->getNetworkSessionKey()).c_str());
- logInfo("data session key---------- %s", mts::Text::bin2hexString(this->getDataSessionKey()).c_str());
- } else {
- logInfo("network name ------------- %s", this->getNetworkName().c_str());
- logInfo("network phrase ----------- %s", this->getNetworkPassphrase().c_str());
- logInfo("network EUI -------------- %s", mts::Text::bin2hexString(this->getNetworkId()).c_str());
- logInfo("network KEY -------------- %s", mts::Text::bin2hexString(this->getNetworkKey()).c_str());
- }
- logInfo("========================");
- logInfo("communication parameters");
- logInfo("========================");
- if (this->getJoinMode() == this->PEER_TO_PEER) {
- logInfo("TX frequency ------------- %lu", this->getTxFrequency());
- } else {
- logInfo("acks --------------------- %s, %u attempts", this->getAck() > 0 ? "on" : "off", this->getAck());
- }
- logInfo("TX datarate -------------- %s", this->DataRateStr(this->getTxDataRate()).c_str());
- logInfo("TX power ----------------- %lu dBm", this->getTxPower());
- logInfo("Antenna gain ------------- %u dBm", this->getAntennaGain());
-}
-
-void MultitechDot::update_ota_config_name_phrase(std::string network_name, std::string network_passphrase,
- uint8_t frequency_sub_band, bool public_network, uint8_t ack) {
- std::string current_network_name = this->getNetworkName();
- std::string current_network_passphrase = this->getNetworkPassphrase();
- uint8_t current_frequency_sub_band = this->getFrequencySubBand();
- bool current_public_network = this->getPublicNetwork();
- uint8_t current_ack = this->getAck();
-
- if (current_network_name != network_name) {
- logInfo("changing network name from \"%s\" to \"%s\"", current_network_name.c_str(), network_name.c_str());
- if (this->setNetworkName(network_name) != this->MDOT_OK) {
- logError("failed to set network name to \"%s\"", network_name.c_str());
- }
- }
-
- if (current_network_passphrase != network_passphrase) {
- logInfo("changing network passphrase from \"%s\" to \"%s\"", current_network_passphrase.c_str(),
- network_passphrase.c_str());
- if (this->setNetworkPassphrase(network_passphrase) != this->MDOT_OK) {
- logError("failed to set network passphrase to \"%s\"", network_passphrase.c_str());
- }
- }
-
- if (current_frequency_sub_band != frequency_sub_band) {
- logInfo("changing frequency sub band from %u to %u", current_frequency_sub_band, frequency_sub_band);
- if (this->setFrequencySubBand(frequency_sub_band) != this->MDOT_OK) {
- logError("failed to set frequency sub band to %u", frequency_sub_band);
- }
- }
-
- if (current_public_network != public_network) {
- logInfo("changing public network from %s to %s", current_public_network ? "on" : "off",
- public_network ? "on" : "off");
- if (this->setPublicNetwork(public_network) != this->MDOT_OK) {
- logError("failed to set public network to %s", public_network ? "on" : "off");
- }
- }
-
- if (current_ack != ack) {
- logInfo("changing acks from %u to %u", current_ack, ack);
- if (this->setAck(ack) != this->MDOT_OK) {
- logError("failed to set acks to %u", ack);
- }
- }
-}
-
-void MultitechDot::update_ota_config_id_key(uint8_t *network_id, uint8_t *network_key, uint8_t frequency_sub_band,
- bool public_network, uint8_t ack) {
- std::vector<uint8_t> current_network_id = this->getNetworkId();
- std::vector<uint8_t> current_network_key = this->getNetworkKey();
- uint8_t current_frequency_sub_band = this->getFrequencySubBand();
- bool current_public_network = this->getPublicNetwork();
- uint8_t current_ack = this->getAck();
-
- std::vector<uint8_t> network_id_vector(network_id, network_id + 8);
- std::vector<uint8_t> network_key_vector(network_key, network_key + 16);
-
- if (current_network_id != network_id_vector) {
- logInfo("changing network ID from \"%s\" to \"%s\"", mts::Text::bin2hexString(current_network_id).c_str(),
- mts::Text::bin2hexString(network_id_vector).c_str());
- if (this->setNetworkId(network_id_vector) != this->MDOT_OK) {
- logError("failed to set network ID to \"%s\"", mts::Text::bin2hexString(network_id_vector).c_str());
- }
- }
-
- if (current_network_key != network_key_vector) {
- logInfo("changing network KEY from \"%s\" to \"%s\"", mts::Text::bin2hexString(current_network_key).c_str(),
- mts::Text::bin2hexString(network_key_vector).c_str());
- if (this->setNetworkKey(network_key_vector) != this->MDOT_OK) {
- logError("failed to set network KEY to \"%s\"", mts::Text::bin2hexString(network_key_vector).c_str());
- }
- }
-
- if (current_frequency_sub_band != frequency_sub_band) {
- logInfo("changing frequency sub band from %u to %u", current_frequency_sub_band, frequency_sub_band);
- if (this->setFrequencySubBand(frequency_sub_band) != this->MDOT_OK) {
- logError("failed to set frequency sub band to %u", frequency_sub_band);
- }
- }
-
- if (current_public_network != public_network) {
- logInfo("changing public network from %s to %s", current_public_network ? "on" : "off",
- public_network ? "on" : "off");
- if (this->setPublicNetwork(public_network) != this->MDOT_OK) {
- logError("failed to set public network to %s", public_network ? "on" : "off");
- }
- }
-
- if (current_ack != ack) {
- logInfo("changing acks from %u to %u", current_ack, ack);
- if (this->setAck(ack) != this->MDOT_OK) {
- logError("failed to set acks to %u", ack);
- }
- }
-}
void MultitechDot::update_manual_config(struct dot_config *config) {
- std::vector<uint8_t> current_network_address = this->getNetworkAddress();
- std::vector<uint8_t> current_network_session_key = this->getNetworkSessionKey();
- std::vector<uint8_t> current_data_session_key = this->getDataSessionKey();
- uint8_t current_frequency_sub_band = this->getFrequencySubBand();
- bool current_public_network = this->getPublicNetwork();
- uint8_t current_ack = this->getAck();
-
- std::vector<uint8_t> network_address_vector(config->network_address, config->network_address + 4);
- std::vector<uint8_t> network_session_key_vector(config->network_session_key, config->network_session_key + 16);
- std::vector<uint8_t> data_session_key_vector(config->data_session_key, config->data_session_key + 16);
-
- if (current_network_address != network_address_vector) {
- logInfo("changing network address from \"%s\" to \"%s\"",
- mts::Text::bin2hexString(current_network_address).c_str(),
- mts::Text::bin2hexString(network_address_vector).c_str());
- if (this->setNetworkAddress(network_address_vector) != this->MDOT_OK) {
- logError("failed to set network address to \"%s\"",
- mts::Text::bin2hexString(network_address_vector).c_str());
- }
- }
-
- if (current_network_session_key != network_session_key_vector) {
- logInfo("changing network session key from \"%s\" to \"%s\"",
- mts::Text::bin2hexString(current_network_session_key).c_str(),
- mts::Text::bin2hexString(network_session_key_vector).c_str());
- if (this->setNetworkSessionKey(network_session_key_vector) != this->MDOT_OK) {
- logError("failed to set network session key to \"%s\"",
- mts::Text::bin2hexString(network_session_key_vector).c_str());
- }
- }
-
- if (current_data_session_key != data_session_key_vector) {
- logInfo("changing data session key from \"%s\" to \"%s\"",
- mts::Text::bin2hexString(current_data_session_key).c_str(),
- mts::Text::bin2hexString(data_session_key_vector).c_str());
- if (this->setDataSessionKey(data_session_key_vector) != this->MDOT_OK) {
- logError("failed to set data session key to \"%s\"",
- mts::Text::bin2hexString(data_session_key_vector).c_str());
- }
- }
-
- if (current_frequency_sub_band != config->frequency_sub_band) {
- logInfo("changing frequency sub band from %u to %u", current_frequency_sub_band, config->frequency_sub_band);
- if (this->setFrequencySubBand(config->frequency_sub_band) != this->MDOT_OK) {
- logError("failed to set frequency sub band to %u", config->frequency_sub_band);
- }
- }
-
- if (current_public_network != config->public_network) {
- logInfo("changing public network from %s to %s", current_public_network ? "on" : "off",
- config->public_network ? "on" : "off");
- if (this->setPublicNetwork(config->public_network) != this->MDOT_OK) {
- logError("failed to set public network to %s", config->public_network ? "on" : "off");
- }
- }
-
- if (current_ack != config->ack) {
- logInfo("changing acks from %u to %u", current_ack, config->ack);
- if (this->setAck(config->ack) != this->MDOT_OK) {
- logError("failed to set acks to %u", config->ack);
- }
- }
-}
-
-void MultitechDot::update_peer_to_peer_config(uint8_t *network_address, uint8_t *network_session_key,
- uint8_t *data_session_key, uint32_t tx_frequency, uint8_t tx_datarate,
- uint8_t tx_power) {
- std::vector<uint8_t> current_network_address = this->getNetworkAddress();
- std::vector<uint8_t> current_network_session_key = this->getNetworkSessionKey();
- std::vector<uint8_t> current_data_session_key = this->getDataSessionKey();
- uint32_t current_tx_frequency = this->getTxFrequency();
- uint8_t current_tx_datarate = this->getTxDataRate();
- uint32_t current_tx_power = this->getTxPower();
-
- std::vector<uint8_t> network_address_vector(network_address, network_address + 4);
- std::vector<uint8_t> network_session_key_vector(network_session_key, network_session_key + 16);
- std::vector<uint8_t> data_session_key_vector(data_session_key, data_session_key + 16);
-
- if (current_network_address != network_address_vector) {
- logInfo("changing network address from \"%s\" to \"%s\"",
- mts::Text::bin2hexString(current_network_address).c_str(),
- mts::Text::bin2hexString(network_address_vector).c_str());
- if (this->setNetworkAddress(network_address_vector) != this->MDOT_OK) {
- logError("failed to set network address to \"%s\"",
- mts::Text::bin2hexString(network_address_vector).c_str());
- }
- }
-
- if (current_network_session_key != network_session_key_vector) {
- logInfo("changing network session key from \"%s\" to \"%s\"",
- mts::Text::bin2hexString(current_network_session_key).c_str(),
- mts::Text::bin2hexString(network_session_key_vector).c_str());
- if (this->setNetworkSessionKey(network_session_key_vector) != this->MDOT_OK) {
- logError("failed to set network session key to \"%s\"",
- mts::Text::bin2hexString(network_session_key_vector).c_str());
- }
- }
-
- if (current_data_session_key != data_session_key_vector) {
- logInfo("changing data session key from \"%s\" to \"%s\"",
- mts::Text::bin2hexString(current_data_session_key).c_str(),
- mts::Text::bin2hexString(data_session_key_vector).c_str());
- if (this->setDataSessionKey(data_session_key_vector) != this->MDOT_OK) {
- logError("failed to set data session key to \"%s\"",
- mts::Text::bin2hexString(data_session_key_vector).c_str());
- }
- }
-
- if (current_tx_frequency != tx_frequency) {
- logInfo("changing TX frequency from %lu to %lu", current_tx_frequency, tx_frequency);
- if (this->setTxFrequency(tx_frequency) != this->MDOT_OK) {
- logError("failed to set TX frequency to %lu", tx_frequency);
- }
- }
-
- if (current_tx_datarate != tx_datarate) {
- logInfo("changing TX datarate from %u to %u", current_tx_datarate, tx_datarate);
- if (this->setTxDataRate(tx_datarate) != this->MDOT_OK) {
- logError("failed to set TX datarate to %u", tx_datarate);
- }
- }
-
- if (current_tx_power != tx_power) {
- logInfo("changing TX power from %u to %u", current_tx_power, tx_power);
- if (this->setTxPower(tx_power) != this->MDOT_OK) {
- logError("failed to set TX power to %u", tx_power);
- }
- }
-}
-
-void MultitechDot::update_network_link_check_config(uint8_t link_check_count, uint8_t link_check_threshold) {
- uint8_t current_link_check_count = this->getLinkCheckCount();
- uint8_t current_link_check_threshold = this->getLinkCheckThreshold();
-
- if (current_link_check_count != link_check_count) {
- logInfo("changing link check count from %u to %u", current_link_check_count, link_check_count);
- if (this->setLinkCheckCount(link_check_count) != this->MDOT_OK) {
- logError("failed to set link check count to %u", link_check_count);
- }
- }
-
- if (current_link_check_threshold != link_check_threshold) {
- logInfo("changing link check threshold from %u to %u", current_link_check_threshold, link_check_threshold);
- if (this->setLinkCheckThreshold(link_check_threshold) != this->MDOT_OK) {
- logError("failed to set link check threshold to %u", link_check_threshold);
- }
- }
-}
-
-void MultitechDot::join_network() {
- int32_t j_attempts = 0;
- int32_t ret = this->MDOT_ERROR;
-
- // attempt to join the network
- while (ret != this->MDOT_OK) {
- logInfo("attempt %d to join network", ++j_attempts);
- ret = this->joinNetwork();
- if (ret != this->MDOT_OK) {
- logError("failed to join network %d:%s", ret, this->getReturnCodeString(ret).c_str());
- // in some frequency bands we need to wait until another channel is available before transmitting again
- uint32_t delay_s = (this->getNextTxMs() / 1000) + 1;
- if (delay_s < 2) {
- logInfo("waiting %lu s until next free channel", delay_s);
- wait(delay_s);
- } else {
- logInfo("sleeping %lu s until next free channel", delay_s);
- this->sleep(delay_s, this->RTC_ALARM, false);
- }
- }
- }
-}
-
-void MultitechDot::deep_sleep(uint32_t min_delay_s) {
- uint32_t delay_s = this->getNextTxMs() / 1000;
-
- // save the session so we don't need to join again after waking up
- // not necessary if going into sleep mode since RAM is retained
- logInfo("saving network session to NVM");
- this->saveNetworkSession();
-
- if (delay_s < min_delay_s) {
- delay_s = min_delay_s;
- }
-
- logInfo("deepsleeping %lus", delay_s);
- logInfo("application will execute from beginning after waking up");
-
- // go to deepsleep for delay_s seconds and wake using the RTC alarm
- this->sleep(delay_s, this->RTC_ALARM, true);
-}
-
-void MultitechDot::sleep_wake_rtc_only(bool deepsleep) {
- // in some frequency bands we need to wait until another channel is available before transmitting again
- // wait at least 10s between transmissions
- uint32_t delay_s = this->getNextTxMs() / 1000;
- if (delay_s < 10) {
- delay_s = 10;
- }
-
- logInfo("%s sleeping %lus", deepsleep ? "deep" : "", delay_s);
- logInfo("application will %s after waking up", deepsleep ? "execute from beginning" : "resume");
-
- // lowest current consumption in sleep mode can only be achieved by configuring IOs as analog inputs with no pull resistors
- // the library handles all internal IOs automatically, but the external IOs are the application's responsibility
- // certain IOs may require internal pullup or pulldown resistors because leaving them floating would cause extra current consumption
- // for xDot: UART_*, I2C_*, SPI_*, GPIO*, WAKE
- // for mDot: XBEE_*, USBTX, USBRX, PB_0, PB_1
- // steps are:
- // * save IO configuration
- // * configure IOs to reduce current consumption
- // * sleep
- // * restore IO configuration
- if (!deepsleep) {
- // save the GPIO state.
- sleep_save_io();
-
- // configure GPIOs for lowest current
- sleep_configure_io();
- }
-
- // go to sleep/deepsleep for delay_s seconds and wake using the RTC alarm
- this->sleep(delay_s, this->RTC_ALARM, deepsleep);
-
- if (!deepsleep) {
- // restore the GPIO state.
- sleep_restore_io();
- }
-}
-
-void MultitechDot::sleep_wake_interrupt_only(bool deepsleep) {
- if (deepsleep) {
- // for xDot, WAKE pin (connected to S2 on xDot-DK) is the only pin that can wake the processor from deepsleep
- // it is automatically configured when INTERRUPT or RTC_ALARM_OR_INTERRUPT is the wakeup source and deepsleep is true in the mDot::sleep call
- } else {
- // configure WAKE pin (connected to S2 on xDot-DK) as the pin that will wake the xDot from low power modes
- // other pins can be configured instead: GPIO0-3 or UART_RX
- this->setWakePin(WAKE);
- }
-
- logInfo("%s sleeping until interrupt on %s pin", deepsleep ? "deep" : "",
- deepsleep ? "WAKE" : this->pinName2Str(this->getWakePin()).c_str());
-
- logInfo("application will %s after waking up", deepsleep ? "execute from beginning" : "resume");
-
- // lowest current consumption in sleep mode can only be achieved by configuring IOs as analog inputs with no pull resistors
- // the library handles all internal IOs automatically, but the external IOs are the application's responsibility
- // certain IOs may require internal pullup or pulldown resistors because leaving them floating would cause extra current consumption
- // for xDot: UART_*, I2C_*, SPI_*, GPIO*, WAKE
- // for mDot: XBEE_*, USBTX, USBRX, PB_0, PB_1
- // steps are:
- // * save IO configuration
- // * configure IOs to reduce current consumption
- // * sleep
- // * restore IO configuration
- if (!deepsleep) {
- // save the GPIO state.
- this->sleep_save_io();
-
- // configure GPIOs for lowest current
- this->sleep_configure_io();
- }
-
- // go to sleep/deepsleep and wake on rising edge of configured wake pin (only the WAKE pin in deepsleep)
- // since we're not waking on the RTC alarm, the interval is ignored
- this->sleep(0, this->INTERRUPT, deepsleep);
-
- if (!deepsleep) {
- // restore the GPIO state.
- this->sleep_restore_io();
- }
+ BaseDot::update_manual_config(
+ config->network_address,
+ config->network_session_key,
+ config->data_session_key,
+ config->frequency_sub_band,
+ config->public_network,
+ config->ack
+ );
}
void MultitechDot::sleep_wake_rtc_or_interrupt(uint32_t delay_s, bool deepsleep) {
@@ -527,92 +135,3 @@
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
}
-
-void MultitechDot::sleep_save_io() {
- logInfo("Save GPIO states");
- xdot_save_gpio_state();
-}
-
-void MultitechDot::sleep_configure_io() {
- logInfo("Configure GPIO for lowest current");
- // GPIO Ports Clock Enable
- __GPIOA_CLK_ENABLE();
- __GPIOB_CLK_ENABLE();
- __GPIOC_CLK_ENABLE();
- __GPIOH_CLK_ENABLE();
-
- GPIO_InitTypeDef GPIO_InitStruct;
-
- // UART1_TX, UART1_RTS & UART1_CTS to analog nopull - RX could be a wakeup source
- GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_11 | GPIO_PIN_12;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
- // I2C_SDA & I2C_SCL to analog nopull
- GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_9;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
- // SPI_MOSI, SPI_MISO, SPI_SCK, & SPI_NSS to analog nopull
- GPIO_InitStruct.Pin = GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
- // iterate through potential wake pins - leave the configured wake pin alone if one is needed
- if (this->getWakePin() != WAKE || this->getWakeMode() == this->RTC_ALARM) {
- GPIO_InitStruct.Pin = GPIO_PIN_0;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- }
- if (this->getWakePin() != GPIO0 || this->getWakeMode() == this->RTC_ALARM) {
- GPIO_InitStruct.Pin = GPIO_PIN_4;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- }
- if (this->getWakePin() != GPIO1 || this->getWakeMode() == this->RTC_ALARM) {
- GPIO_InitStruct.Pin = GPIO_PIN_5;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- }
- if (this->getWakePin() != GPIO2 || this->getWakeMode() == this->RTC_ALARM) {
- GPIO_InitStruct.Pin = GPIO_PIN_0;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- }
- if (this->getWakePin() != GPIO3 || this->getWakeMode() == this->RTC_ALARM) {
- GPIO_InitStruct.Pin = GPIO_PIN_2;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
- }
- if (this->getWakePin() != UART1_RX || this->getWakeMode() == this->RTC_ALARM) {
- GPIO_InitStruct.Pin = GPIO_PIN_10;
- GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
- }
-}
-
-void MultitechDot::sleep_restore_io() {
- logInfo("Restore GPIO states");
- xdot_restore_gpio_state();
-}
-
-void MultitechDot::send_data(std::vector<uint8_t> data) {
- int32_t ret;
-
- ret = this->send(data);
- if (ret != this->MDOT_OK) {
- logError("failed to send data to %s [%d][%s]", this->getJoinMode() == this->PEER_TO_PEER ? "peer" : "gateway",
- ret, this->getReturnCodeString(ret).c_str());
- } else {
- logInfo("successfully sent data to %s", this->getJoinMode() == this->PEER_TO_PEER ? "peer" : "gateway");
- }
-}