Diff: BMP280/BMP280.h

Revision:

22:5c07298d3383

diff -r de62f413b500 -r 5c07298d3383 BMP280/BMP280.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BMP280/BMP280.h	Mon Aug 26 08:11:41 2019 +0000
@@ -0,0 +1,378 @@
+/*******************************************************************************
+* Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a
+* copy of this software and associated documentation files (the "Software"),
+* to deal in the Software without restriction, including without limitation
+* the rights to use, copy, modify, merge, publish, distribute, sublicense,
+* and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included
+* in all copies or substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+* OTHER DEALINGS IN THE SOFTWARE.
+*
+* Except as contained in this notice, the name of Maxim Integrated
+* Products, Inc. shall not be used except as stated in the Maxim Integrated
+* Products, Inc. Branding Policy.
+*
+* The mere transfer of this software does not imply any licenses
+* of trade secrets, proprietary technology, copyrights, patents,
+* trademarks, maskwork rights, or any other form of intellectual
+* property whatsoever. Maxim Integrated Products, Inc. retains all
+* ownership rights.
+*******************************************************************************/
+/**
+ * Bosch BMP280 Digital Pressure Sensor
+ *
+ */
+
+#ifndef BMP280_H_
+#define BMP280_H_
+
+#include "mbed.h"
+
+/**
+ * @brief Bosch BMP280 Digital Pressure Sensor
+ */
+class BMP280 {
+
+public:
+
+  typedef enum {  ///< BMP280 Register addresses
+	
+    BMP280_READID     = 0x58,
+    BMP280_TEMP_XLSB  = 0xFC,
+    BMP280_TEMP_LSB   = 0xFB,
+    BMP280_TEMP_MSB   = 0xFA,
+    BMP280_PRESS_XLSB = 0xF9,
+    BMP280_PRESS_LSB  = 0xF8,
+    BMP280_PRESS_MSB  = 0xF7,
+    BMP280_CONFIG     = 0xF5,
+    BMP280_CTRL_MEAS  = 0xF4,
+    BMP280_STATUS     = 0xF3,
+    BMP280_RESET      = 0xE0,
+    BMP280_ID         = 0xD0,
+    ///< calib25-calib00: 0xA1-0x88
+    BMP280_CALIB25    = 0xA1, ///< Beginning address
+    BMP280_CALIB00    = 0x88, ///< Ending address
+
+    BMP280_REGISTER_CHIPID       = 0xD0,
+    BMP280_REGISTER_VERSION      = 0xD1,
+    BMP280_REGISTER_SOFTRESET    = 0xE0,
+    BMP280_REGISTER_CAL26        = 0xE1, // R calibration stored in 0xE1-0xF0
+    BMP280_REGISTER_CONTROL      = 0xF4,
+    BMP280_REGISTER_CONFIG       = 0xF5,
+    BMP280_REGISTER_PRESSUREDATA = 0xF7,
+    BMP280_REGISTER_TEMPDATA     = 0xFA,	
+    	
+  } BMP280_REG_map_t;
+	
+
+  /**
+   * @brief BMP280 constructor.
+   * @param sda mbed pin to use for SDA line of I2C interface.
+   * @param scl mbed pin to use for SCL line of I2C interface.
+   * @param slaveAddress Slave Address of the device.
+   */
+  BMP280(PinName sda, PinName scl, int slaveAddress);
+
+  /**
+   * @brief BMP280 constructor.
+   * @param i2c I2C object to use.
+   * @param slaveAddress Slave Address of the device.
+   */
+  BMP280(I2C *i2c, int slaveAddress);
+
+  char loggingEnabled;
+  char loggingSampleRate;
+
+  /**
+  * @brief Write a device register
+  */
+  int writeReg(char reg, char value);
+  /**
+  * @brief Read a device register
+  */
+  int readReg(char reg, char *value);
+  
+  ///< @brief CONFIG_REG (0xF5)
+  typedef union bmp280_config_reg {
+    char all;
+    struct {
+      char spi3w_en : 1;
+      char reserved : 1;
+      char filter   : 3;
+      char t_sb     : 3;
+    } bit;
+  } bmp280_config_t;
+
+  ///< @brief CTRL_MEAS (0xF4)
+  typedef union bmp280_ctrl_meas {
+    char all;
+    struct {
+      char mode   : 2;
+      char osrs_p : 3;
+      char osrs_t : 3;
+    } bit;
+  } bmp280_ctrl_meas_t;
+
+  ///< @brief STATUS (0xF3)
+  typedef union bmp280_status {
+    char all;
+    struct {
+      char im_update : 1;
+      char reserved1 : 2;
+      char measuring : 1;
+      char reserved2 : 4;
+    } bit;
+  } bmp280_status_t;
+
+
+  ///< @brief  RESET (0xE0)
+  char bmp280_reset;
+
+  ///< @brief  ID (0xD0)
+  char bmp280_id;
+
+  typedef enum {
+    SKIPPED_P = 0,
+    OVERSAMPLING_X1_P  = 1,
+    OVERSAMPLING_X2_P  = 2,
+    OVERSAMPLING_X4_P  = 3,
+    OVERSAMPLING_X8_P  = 4,
+    OVERSAMPLING_X16_P = 5
+  } bmp280_osrs_P_t;
+
+  typedef enum {
+    SKIPPED_T = 0,
+    OVERSAMPLING_X1_T  = 1,
+    OVERSAMPLING_X2_T  = 2,
+    OVERSAMPLING_X4_T  = 3,
+    OVERSAMPLING_X8_T  = 4,
+    OVERSAMPLING_X16_T = 5
+  } bmp280_osrs_T_t;
+
+  typedef enum {
+    FILT_OFF = 1,
+    FILT_2   = 2,
+    FILT_3   = 4,
+    FILT_4   = 8,
+    FILT_5   = 16
+  } bmp280_FILT_t;
+
+  typedef enum {
+    SLEEP_MODE  = 0,
+    FORCED_MODE = 1,
+    NORMAL_MODE = 3
+  } bmp280_MODE_t;
+
+  typedef enum {
+    T_0_5  = 0,
+    T_62_5 = 1,
+    T_125  = 2,
+    T_250  = 3,
+    T_500  = 4,
+    T_1000 = 5,
+    T_2000 = 6,
+    T_4000 = 7
+  } bmp280_TSB_t;
+
+  ///< @brief calib25... calib00  (0xA1...0x88)
+  char bmp280_Calib[26];
+
+  uint16_t dig_T1; ///< Unique temp coeffs. read from the chip
+  int16_t  dig_T2;
+  int16_t  dig_T3;
+
+  uint16_t dig_P1; ///< Unique Press. coeffs. read from the chip
+  int16_t dig_P2;
+  int16_t dig_P3;
+  int16_t dig_P4;
+  int16_t dig_P5;
+  int16_t dig_P6;
+  int16_t dig_P7;
+  int16_t dig_P8;
+  int16_t dig_P9;
+                 
+  int32_t t_fine; ///< This is calculated int the temperature to be used by the
+                  ///< pressure
+
+  int32_t bmp280_rawPress;
+  int32_t bmp280_rawTemp;
+
+  float Temp_degC;
+  float Press_Pa; 
+
+  /**
+   * @brief BMP280 constructor.
+   * @param sda mbed pin to use for SDA line of I2C interface.
+   * @param scl mbed pin to use for SCL line of I2C interface.
+   */
+  BMP280(PinName sda, PinName scl);
+
+  /**
+   * @brief BMP280 constructor.
+   * @param i2c I2C object to use.
+   */
+  BMP280(I2C *i2c);
+
+  /**
+   * @brief BMP280 destructor.
+   */
+  ~BMP280(void);
+
+  // Function Prototypes
+
+  /**
+  * @brief This initializes the BMP280 
+  * @brief The BMP280 has 2 modes. FORCED mode and  NORMAL mode.  FORCED Mode gives more
+  * @brief control to the processor as the processor sends out the Mode to initiate a conversion
+  * @brief and a data is sent out then. NORMAL mode is initialized once and it just runs and sends
+  * @brief out data at a programmed timed interval.  (In this example the main() will set this to Normal
+  * @brief function)
+  * @param Osrs_p- Pressure oversampling
+  * @param Osrs_t-  Temperature oversampling
+  * @param Filter-  Filter Settings
+  * @param Mode-    Power Modes
+  * @param T_sb-    Standby time (used with Normal mode)
+  * @param dig_T1, dig_T2, dig_T3-  Coeffs used for temp conversion - GLOBAL variables (output)
+  * @param dig_P1, ....  , dig_P9-  Coeffs used for press conversion - GLOBAL variables (output)
+  * @returns  0-if no error.  A non-zero value indicates an error.
+  */
+  int init(bmp280_osrs_P_t Osrs_p, bmp280_osrs_T_t Osrs_t, bmp280_FILT_t Filter,
+           bmp280_MODE_t Mode, bmp280_TSB_t T_sb);
+
+  /**
+   * @brief The BMP280 has 2 modes. FORCED mode and  NORMAL mode.  FORCED Mode
+   * gives more
+   * @brief control to the processor as the processor sends out the Mode to
+   * initiate a conversion
+   * @brief and a data is sent out then. NORMAL mode is initialized once and it
+   * just runs and sends
+   * @brief out data at a programmed timed interval.  (In this example the
+   * main() will set this to Normal
+   * @brief function)
+   * @param *Temp_degC - Pointer to temperature (result in deg C)
+   * @param *Press_Pa - Pointer to pressure (resul in Pascal)
+   * @returns 0-if no error.  A non-zero value indicates an error.
+   */
+  int ReadCompData(float *Temp_degC, float *Press_Pa);
+
+  /**
+   *  @brief This function allows writing to a register.
+   *  @param reg- Address of the register to write to
+   *  @param value- Data written to the register
+   *  @returns 0-if no error.  A non-zero value indicates an error.
+   */
+  int reg_write(BMP280_REG_map_t reg, char value);
+
+  /**
+   * @brief This function allows writing to a register.
+   * @params reg- Address of the register to read from (input)
+   * @params *value- Pointer to the value read from the register (output)
+   * @returns 0-if no error.  A non-zero value indicates an error.
+   */
+  int reg_read(BMP280_REG_map_t reg, char *value, char number);
+
+  /**
+   * @brief Performs a soft reset on the BMP280
+   * @param none
+   * @returns none
+   */
+  void Reset(void);
+
+  /**
+   * @brief Detects if the BMP280 is present
+   * @param none
+   * @returns 1 for found, 0 for not found, -1 for comm error
+   */
+  int Detect(void);
+
+  /**
+   * @brief Performs calculations on the raw temperature data to convert to
+   * @brief temperature in deg C, based on Bosch's algorithm
+   * @param Raw Temp ADC value, Global dig_T1, dig_T2, dig_T3
+   * @returns The Temperature in deg C
+   */
+  float compensate_T_float(int32_t adc_T); // returned value Deg C.
+
+  /**
+    * @brief Performs calculations on the raw pressure data to convert to
+    * @brief pressure in Pascal, based on Bosch's algorithm
+    * @param adc_P Raw Press ADC value, Global dig_P1, dig_P2,..., dig_P9
+    * @returns The Pressure in Pascals
+    */
+  float compensate_P_float(int32_t adc_P); //  returned value Pascal.
+
+  /**
+   * @brief Puts the BMP280 in low power Sleep mode
+   * @param none
+   * @returns 0 if no errors, -1 if error.
+   */
+  int Sleep(void);
+
+  /**
+   * @brief This reads the raw BMP280 data
+   * @param *bmp280_rawData- array of raw output data
+   * @returns 0-if no error.  A non-zero value indicates an error.
+   *
+   */
+  int ReadCompDataRaw(char *bmp280_rawData);
+  /**
+   * @brief This reads the raw BMP280 data uses the Bosch algorithm to get the
+   * data
+   * @brief in float, then the float gets converted to an String
+   * @param *bmp280_rawData- array of raw output data
+   * @returns 0-if no error.  A non-zero value indicates an error.
+   *
+   */
+  int ReadCompDataRaw2(char *bmp280_rawData);
+  /**
+   * @brief This converts the raw BMP280 data to couble based on Bosch's
+   * algorithm
+   * @param *bmp280_rawData- array of raw input data
+   * @param *Temp_degC- pointer to output, Temp value in deg C
+   * @param *Press_Pa- pointer to output, Press value in Pascals
+   * @returns 0-if no error.  A non-zero value indicates an error.
+   *
+   */
+  void ToFloat(char *bmp280_rawData, float *Temp_degC, float *Press_Pa);
+  /**
+   * @brief converts to Farenhite from Centigrade
+   * @param temperature in Centigrade
+   * @returns temperature value in Farenhite
+   */
+  float ToFahrenheit(float temperature);
+
+  /**
+   * @brief Reads a unique ID from the register
+   * @param none
+   * @returns The correct id value which is 0x58
+   */
+  int ReadId(void);
+
+private:
+  /**
+   * @brief I2C pointer
+   */
+  I2C *i2c;
+  /**
+   * @brief Is this object the owner of the I2C object
+   */
+  bool isOwner;
+  /**
+   * @brief Device slave address
+   */
+  int slaveAddress;
+};
+
+#endif // BMP280_H_
+