Revision 0:d2a284d0a714, committed 2017-03-13
- Comitter:
- lucasec
- Date:
- Mon Mar 13 15:29:28 2017 +0000
- Commit message:
- Initial commit
Changed in this revision
diff -r 000000000000 -r d2a284d0a714 pn532.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/pn532.cpp Mon Mar 13 15:29:28 2017 +0000
@@ -0,0 +1,1495 @@
+/**************************************************************************/
+/*!
+ @file pn532.cpp
+ @author Adafruit Industries
+ @license BSD (see license.txt)
+
+ Driver for NXP's PN532 NFC/13.56MHz RFID Transceiver
+
+ This is a library for the Adafruit PN532 NFC/RFID breakout boards
+ This library works with the Adafruit NFC breakout
+ ----> https://www.adafruit.com/products/364
+
+ Check out the links above for our tutorials and wiring diagrams
+ These chips use SPI or I2C to communicate.
+
+ Adafruit invests time and resources providing this open source code,
+ please support Adafruit and open-source hardware by purchasing
+ products from Adafruit!
+
+ @section HISTORY
+
+ v2.1 - Added NTAG2xx helper functions
+
+ v2.0 - Refactored to add I2C support from Adafruit_NFCShield_I2C library.
+
+ v1.4 - Added setPassiveActivationRetries()
+
+ v1.2 - Added writeGPIO()
+ - Added readGPIO()
+
+ v1.1 - Changed readPassiveTargetID() to handle multiple UID sizes
+ - Added the following helper functions for text display
+ static void PrintHex(const uint8_t * data, const uint32_t numBytes)
+ static void PrintHexChar(const uint8_t * pbtData, const uint32_t numBytes)
+ - Added the following Mifare Classic functions:
+ bool mifareclassic_IsFirstBlock (uint32_t uiBlock)
+ bool mifareclassic_IsTrailerBlock (uint32_t uiBlock)
+ uint8_t mifareclassic_AuthenticateBlock (uint8_t * uid, uint8_t uidLen, uint32_t blockNumber, uint8_t keyNumber, uint8_t * keyData)
+ uint8_t mifareclassic_ReadDataBlock (uint8_t blockNumber, uint8_t * data)
+ uint8_t mifareclassic_WriteDataBlock (uint8_t blockNumber, uint8_t * data)
+ - Added the following Mifare Ultalight functions:
+ uint8_t mifareultralight_ReadPage (uint8_t page, uint8_t * buffer)
+*/
+/**************************************************************************/
+#include "pn532.h"
+
+uint8_t pn532ack[] = {0x00, 0x00, 0xFF, 0x00, 0xFF, 0x00};
+uint8_t pn532response_firmwarevers[] = {0x00, 0xFF, 0x06, 0xFA, 0xD5, 0x03};
+
+// Uncomment these lines to enable debug output for PN532(SPI) and/or MIFARE related code
+// #define PN532DEBUG
+// #define MIFAREDEBUG
+
+// Hardware SPI-specific configuration:
+#define PN532_PACKBUFFSIZ 64
+uint8_t pn532_packetbuffer[PN532_PACKBUFFSIZ];
+
+#ifndef _BV
+#define _BV(bit) (1<<(bit))
+#endif
+
+/**************************************************************************/
+/*!
+ @brief Instantiates a new PN532 class using SPI.
+
+ @param clk SPI clock pin (SCK)
+ @param miso SPI MISO pin
+ @param mosi SPI MOSI pin
+ @param ss SPI chip select pin (CS/SSEL)
+*/
+/**************************************************************************/
+PN532::PN532(PinName mosi, PinName miso, PinName sck, PinName ss):
+ _usingSPI(1),
+ _spi(mosi, miso, sck),
+ _ss(ss)
+{
+
+}
+
+
+/**************************************************************************/
+/*!
+ @brief Setups the HW
+*/
+/**************************************************************************/
+void PN532::begin()
+{
+ // not exactly sure why but we have to send a dummy command to get synced up
+ pn532_packetbuffer[0] = PN532_COMMAND_GETFIRMWAREVERSION;
+ sendCommandCheckAck(pn532_packetbuffer, 1);
+
+ // ignore response!
+}
+
+/**************************************************************************/
+/*!
+ @brief Prints a hexadecimal value in plain characters
+
+ @param data Pointer to the byte data
+ @param numBytes Data length in bytes
+*/
+/**************************************************************************/
+void PN532::PrintHex(const uint8_t * data, const uint32_t numBytes)
+{
+ uint32_t szPos;
+ for (szPos=0; szPos < numBytes; szPos++)
+ {
+ printf("0x%01x", data[szPos]&0xff);
+ if ((numBytes > 1) && (szPos != numBytes - 1))
+ {
+ putchar(' ');
+ }
+ }
+ putchar('\r');
+ putchar('\n');
+}
+
+/**************************************************************************/
+/*!
+ @brief Prints a hexadecimal value in plain characters, along with
+ the char equivalents in the following format
+
+ 00 00 00 00 00 00 ......
+
+ @param data Pointer to the byte data
+ @param numBytes Data length in bytes
+*/
+/**************************************************************************/
+void PN532::PrintHexChar(const uint8_t * data, const uint32_t numBytes)
+{
+ uint32_t szPos;
+ for (szPos=0; szPos < numBytes; szPos++)
+ {
+ // Append leading 0 for small values
+ printf("%01x", data[szPos]);
+ if ((numBytes > 1) && (szPos != numBytes - 1))
+ {
+ putchar(' ');
+ }
+ }
+ putchar(' ');
+ putchar(' ');
+ for (szPos=0; szPos < numBytes; szPos++)
+ {
+ if (data[szPos] <= 0x1F)
+ putchar(' ');
+ else
+ putchar((char)data[szPos]);
+ }
+ putchar('\r');
+ putchar('\n');
+}
+
+/**************************************************************************/
+/*!
+ @brief Checks the firmware version of the PN5xx chip
+
+ @returns The chip's firmware version and ID
+*/
+/**************************************************************************/
+uint32_t PN532::getFirmwareVersion(void) {
+ uint32_t response;
+
+ pn532_packetbuffer[0] = PN532_COMMAND_GETFIRMWAREVERSION;
+
+ if (!sendCommandCheckAck(pn532_packetbuffer, 1)) {
+ return 0;
+ }
+
+ // read data packet
+ readdata(pn532_packetbuffer, 12);
+
+ // check some basic stuff
+ if (0 != strncmp((char *)pn532_packetbuffer, (char *)pn532response_firmwarevers, 6)) {
+#ifdef PN532DEBUG
+ printf("Firmware doesn't match!\r\n");
+#endif
+ return 0;
+ }
+
+ int offset = _usingSPI ? 6 : 7; // Skip a response byte when using I2C to ignore extra data.
+ response = pn532_packetbuffer[offset++];
+ response <<= 8;
+ response |= pn532_packetbuffer[offset++];
+ response <<= 8;
+ response |= pn532_packetbuffer[offset++];
+ response <<= 8;
+ response |= pn532_packetbuffer[offset++];
+
+ return response;
+}
+
+
+/**************************************************************************/
+/*!
+ @brief Sends a command and waits a specified period for the ACK
+
+ @param cmd Pointer to the command buffer
+ @param cmdlen The size of the command in bytes
+ @param timeout timeout before giving up
+
+ @returns 1 if everything is OK, 0 if timeout occured before an
+ ACK was recieved
+*/
+/**************************************************************************/
+// default timeout of one second
+bool PN532::sendCommandCheckAck(uint8_t *cmd, uint8_t cmdlen, uint16_t timeout) {
+ // write the command
+ writecommand(cmd, cmdlen);
+
+ // Wait for chip to say its ready!
+ if (!waitready(timeout)) {
+ return false;
+ }
+
+#ifdef PN532DEBUG
+ if (!_usingSPI) {
+ printf("IRQ received\r\n");
+ }
+#endif
+
+ // read acknowledgement
+ if (!readack()) {
+#ifdef PN532DEBUG
+ printf("No ACK frame received!\r\n");
+#endif
+ return false;
+ }
+
+ // For SPI only wait for the chip to be ready again.
+ // This is unnecessary with I2C.
+ if (_usingSPI) {
+ if (!waitready(timeout)) {
+ return false;
+ }
+ }
+
+ return true; // ack'd command
+}
+
+/**************************************************************************/
+/*!
+ Writes an 8-bit value that sets the state of the PN532's GPIO pins
+
+ @warning This function is provided exclusively for board testing and
+ is dangerous since it will throw an error if any pin other
+ than the ones marked "Can be used as GPIO" are modified! All
+ pins that can not be used as GPIO should ALWAYS be left high
+ (value = 1) or the system will become unstable and a HW reset
+ will be required to recover the PN532.
+
+ pinState[0] = P30 Can be used as GPIO
+ pinState[1] = P31 Can be used as GPIO
+ pinState[2] = P32 *** RESERVED (Must be 1!) ***
+ pinState[3] = P33 Can be used as GPIO
+ pinState[4] = P34 *** RESERVED (Must be 1!) ***
+ pinState[5] = P35 Can be used as GPIO
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+bool PN532::writeGPIO(uint8_t pinstate) {
+ // Make sure pinstate does not try to toggle P32 or P34
+ pinstate |= (1 << PN532_GPIO_P32) | (1 << PN532_GPIO_P34);
+
+ // Fill command buffer
+ pn532_packetbuffer[0] = PN532_COMMAND_WRITEGPIO;
+ pn532_packetbuffer[1] = PN532_GPIO_VALIDATIONBIT | pinstate; // P3 Pins
+ pn532_packetbuffer[2] = 0x00; // P7 GPIO Pins (not used ... taken by SPI)
+
+#ifdef PN532DEBUG
+ printf("Writing P3 GPIO: %x", pn532_packetbuffer[1]);
+#endif
+
+ // Send the WRITEGPIO command (0x0E)
+ if (!sendCommandCheckAck(pn532_packetbuffer, 3))
+ return 0x0;
+
+ // Read response packet (00 FF PLEN PLENCHECKSUM D5 CMD+1(0x0F) DATACHECKSUM 00)
+ readdata(pn532_packetbuffer, 8);
+
+#ifdef PN532DEBUG
+ printf("Received: ");
+ PrintHex(pn532_packetbuffer, 8);
+ printf("\r\n");
+#endif
+
+ int offset = _usingSPI ? 5 : 6;
+ return (pn532_packetbuffer[offset] == 0x0F);
+}
+
+/**************************************************************************/
+/*!
+ Reads the state of the PN532's GPIO pins
+
+ @returns An 8-bit value containing the pin state where:
+
+ pinState[0] = P30
+ pinState[1] = P31
+ pinState[2] = P32
+ pinState[3] = P33
+ pinState[4] = P34
+ pinState[5] = P35
+*/
+/**************************************************************************/
+uint8_t PN532::readGPIO(void) {
+ pn532_packetbuffer[0] = PN532_COMMAND_READGPIO;
+
+ // Send the READGPIO command (0x0C)
+ if (! sendCommandCheckAck(pn532_packetbuffer, 1))
+ return 0x0;
+
+ // Read response packet (00 FF PLEN PLENCHECKSUM D5 CMD+1(0x0D) P3 P7 IO1 DATACHECKSUM 00)
+ readdata(pn532_packetbuffer, 11);
+
+ /* READGPIO response should be in the following format:
+
+ byte Description
+ ------------- ------------------------------------------
+ b0..5 Frame header and preamble (with I2C there is an extra 0x00)
+ b6 P3 GPIO Pins
+ b7 P7 GPIO Pins (not used ... taken by SPI)
+ b8 Interface Mode Pins (not used ... bus select pins)
+ b9..10 checksum */
+
+ int p3offset = _usingSPI ? 6 : 7;
+
+#ifdef PN532DEBUG
+ printf("Received: ");
+ PrintHex(pn532_packetbuffer, 11);
+ printf("\r\n");
+ printf("P3 GPIO: 0x%x\r\n", pn532_packetbuffer[p3offset]);
+ printf("P7 GPIO: 0x%x\r\n", pn532_packetbuffer[p3offset+1]);
+ printf("IO GPIO: 0x%x\r\n", pn532_packetbuffer[p3offset+2]);
+ // Note: You can use the IO GPIO value to detect the serial bus being used
+ switch(pn532_packetbuffer[p3offset+2])
+ {
+ case 0x00: // Using UART
+ printf("Using UART (IO = 0x00)\r\n");
+ break;
+ case 0x01: // Using I2C
+ printf("Using I2C (IO = 0x01)\r\n");
+ break;
+ case 0x02: // Using SPI
+ printf("Using SPI (IO = 0x02)\r\n");
+ break;
+ }
+#endif
+
+ return pn532_packetbuffer[p3offset];
+}
+
+/**************************************************************************/
+/*!
+ @brief Configures the SAM (Secure Access Module)
+*/
+/**************************************************************************/
+bool PN532::SAMConfig(void) {
+ pn532_packetbuffer[0] = PN532_COMMAND_SAMCONFIGURATION;
+ pn532_packetbuffer[1] = 0x01; // normal mode;
+ pn532_packetbuffer[2] = 0x14; // timeout 50ms * 20 = 1 second
+ pn532_packetbuffer[3] = 0x01; // use IRQ pin!
+
+ if (!sendCommandCheckAck(pn532_packetbuffer, 4))
+ return false;
+
+ // read data packet
+ readdata(pn532_packetbuffer, 8);
+
+ int offset = _usingSPI ? 5 : 6;
+ return (pn532_packetbuffer[offset] == 0x15);
+}
+
+/**************************************************************************/
+/*!
+ Sets the MxRtyPassiveActivation byte of the RFConfiguration register
+
+ @param maxRetries 0xFF to wait forever, 0x00..0xFE to timeout
+ after mxRetries
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+bool PN532::setPassiveActivationRetries(uint8_t maxRetries) {
+ pn532_packetbuffer[0] = PN532_COMMAND_RFCONFIGURATION;
+ pn532_packetbuffer[1] = 5; // Config item 5 (MaxRetries)
+ pn532_packetbuffer[2] = 0xFF; // MxRtyATR (default = 0xFF)
+ pn532_packetbuffer[3] = 0x01; // MxRtyPSL (default = 0x01)
+ pn532_packetbuffer[4] = maxRetries;
+
+#ifdef MIFAREDEBUG
+ printf("Setting MxRtyPassiveActivation to %d\r\n", maxRetries);
+#endif
+
+ if (!sendCommandCheckAck(pn532_packetbuffer, 5))
+ return 0x0; // no ACK
+
+ return 1;
+}
+
+/***** ISO14443A Commands ******/
+
+/**************************************************************************/
+/*!
+ Waits for an ISO14443A target to enter the field
+
+ @param cardBaudRate Baud rate of the card
+ @param uid Pointer to the array that will be populated
+ with the card's UID (up to 7 bytes)
+ @param uidLength Pointer to the variable that will hold the
+ length of the card's UID.
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+bool PN532::readPassiveTargetID(uint8_t cardbaudrate, uint8_t * uid, uint8_t * uidLength, uint16_t timeout) {
+ pn532_packetbuffer[0] = PN532_COMMAND_INLISTPASSIVETARGET;
+ pn532_packetbuffer[1] = 1; // max 1 cards at once (we can set this to 2 later)
+ pn532_packetbuffer[2] = cardbaudrate;
+
+ if (!sendCommandCheckAck(pn532_packetbuffer, 3, timeout))
+ {
+#ifdef PN532DEBUG
+ printf("No card(s) read\r\n");
+#endif
+ return 0x0; // no cards read
+ }
+
+ // wait for a card to enter the field (only possible with I2C)
+ if (!_usingSPI) {
+#ifdef PN532DEBUG
+ printf("Waiting for IRQ (indicates card presence)\r\n");
+#endif
+ if (!waitready(timeout)) {
+#ifdef PN532DEBUG
+ printf("IRQ Timeout\r\n");
+#endif
+ return 0x0;
+ }
+ }
+
+ // read data packet
+ readdata(pn532_packetbuffer, 20);
+ // check some basic stuff
+
+ /* ISO14443A card response should be in the following format:
+
+ byte Description
+ ------------- ------------------------------------------
+ b0..6 Frame header and preamble
+ b7 Tags Found
+ b8 Tag Number (only one used in this example)
+ b9..10 SENS_RES
+ b11 SEL_RES
+ b12 NFCID Length
+ b13..NFCIDLen NFCID */
+
+#ifdef MIFAREDEBUG
+ printf("Found %d tags\r\n", pn532_packetbuffer[7]);
+#endif
+ if (pn532_packetbuffer[7] != 1)
+ return 0;
+
+ uint16_t sens_res = pn532_packetbuffer[9];
+ sens_res <<= 8;
+ sens_res |= pn532_packetbuffer[10];
+#ifdef MIFAREDEBUG
+ printf("ATQA: 0x%x\r\n", sens_res);
+ printf("SAK: 0x%x\r\n", pn532_packetbuffer[11]);
+#endif
+
+ /* Card appears to be Mifare Classic */
+ *uidLength = pn532_packetbuffer[12];
+#ifdef MIFAREDEBUG
+ printf("UID:");
+#endif
+ for (uint8_t i=0; i < pn532_packetbuffer[12]; i++)
+ {
+ uid[i] = pn532_packetbuffer[13+i];
+#ifdef MIFAREDEBUG
+ printf(" 0x", uid[i]);
+#endif
+ }
+#ifdef MIFAREDEBUG
+ printf("\r\n");
+#endif
+
+ return 1;
+}
+
+/**************************************************************************/
+/*!
+ @brief Exchanges an APDU with the currently inlisted peer
+
+ @param send Pointer to data to send
+ @param sendLength Length of the data to send
+ @param response Pointer to response data
+ @param responseLength Pointer to the response data length
+*/
+/**************************************************************************/
+bool PN532::inDataExchange(uint8_t * send, uint8_t sendLength, uint8_t * response, uint8_t * responseLength) {
+ if (sendLength > PN532_PACKBUFFSIZ-2) {
+#ifdef PN532DEBUG
+ printf("APDU length too long for packet buffer\r\n");
+#endif
+ return false;
+ }
+ uint8_t i;
+
+ pn532_packetbuffer[0] = 0x40; // PN532_COMMAND_INDATAEXCHANGE;
+ pn532_packetbuffer[1] = _inListedTag;
+ for (i=0; i<sendLength; ++i) {
+ pn532_packetbuffer[i+2] = send[i];
+ }
+
+ if (!sendCommandCheckAck(pn532_packetbuffer,sendLength+2,1000)) {
+#ifdef PN532DEBUG
+ printf("Could not send ADPU\r\n");
+#endif
+ return false;
+ }
+
+ if (!waitready(1000)) {
+#ifdef PN532DEBUG
+ printf("Response never received for ADPU...\r\n");
+#endif
+ return false;
+ }
+
+ readdata(pn532_packetbuffer,sizeof(pn532_packetbuffer));
+
+ if (pn532_packetbuffer[0] == 0 && pn532_packetbuffer[1] == 0 && pn532_packetbuffer[2] == 0xff) {
+ uint8_t length = pn532_packetbuffer[3];
+ if (pn532_packetbuffer[4]!=(uint8_t)(~length+1)) {
+#ifdef PN532DEBUG
+ printf("Length check invalid: %x %x\r\n", length, (~length)+1);
+#endif
+ return false;
+ }
+ if (pn532_packetbuffer[5]==PN532_PN532TOHOST && pn532_packetbuffer[6]==PN532_RESPONSE_INDATAEXCHANGE) {
+ if ((pn532_packetbuffer[7] & 0x3f)!=0) {
+#ifdef PN532DEBUG
+ printf("Status code indicates an error\r\n");
+#endif
+ return false;
+ }
+
+ length -= 3;
+
+ if (length > *responseLength) {
+ length = *responseLength; // silent truncation...
+ }
+
+ for (i=0; i<length; ++i) {
+ response[i] = pn532_packetbuffer[8+i];
+ }
+ *responseLength = length;
+
+ return true;
+ }
+ else {
+ printf("Don't know how to handle this command: %01x\r\n", pn532_packetbuffer[6]);
+ return false;
+ }
+ }
+ else {
+ printf("Preamble missing\r\n");
+ return false;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief 'InLists' a passive target. PN532 acting as reader/initiator,
+ peer acting as card/responder.
+*/
+/**************************************************************************/
+bool PN532::inListPassiveTarget() {
+ pn532_packetbuffer[0] = PN532_COMMAND_INLISTPASSIVETARGET;
+ pn532_packetbuffer[1] = 1;
+ pn532_packetbuffer[2] = 0;
+
+#ifdef PN532DEBUG
+ printf("About to inList passive target");
+#endif
+
+ if (!sendCommandCheckAck(pn532_packetbuffer,3,1000)) {
+#ifdef PN532DEBUG
+ printf("Could not send inlist message\r\n");
+#endif
+ return false;
+ }
+
+ if (!waitready(30000)) {
+ return false;
+ }
+
+ readdata(pn532_packetbuffer,sizeof(pn532_packetbuffer));
+
+ if (pn532_packetbuffer[0] == 0 && pn532_packetbuffer[1] == 0 && pn532_packetbuffer[2] == 0xff) {
+ uint8_t length = pn532_packetbuffer[3];
+ if (pn532_packetbuffer[4]!=(uint8_t)(~length+1)) {
+#ifdef PN532DEBUG
+ printf("Length check invalid: %x %x\r\n", length, (~length)+1);
+#endif
+ return false;
+ }
+ if (pn532_packetbuffer[5]==PN532_PN532TOHOST && pn532_packetbuffer[6]==PN532_RESPONSE_INLISTPASSIVETARGET) {
+ if (pn532_packetbuffer[7] != 1) {
+#ifdef PN532DEBUG
+ printf("Unhandled number of targets inlisted\r\n");
+#endif
+ printf("Number of tags inlisted: %d\r\n", pn532_packetbuffer[7]);
+ return false;
+ }
+
+ _inListedTag = pn532_packetbuffer[8];
+ printf("Tag number: %d\r\n", _inListedTag);
+
+ return true;
+ } else {
+#ifdef PN532DEBUG
+ printf("Unexpected response to inlist passive host");
+#endif
+ return false;
+ }
+ }
+ else {
+#ifdef PN532DEBUG
+ printf("Preamble missing\r\n");
+#endif
+ return false;
+ }
+
+ return true;
+}
+
+
+/***** Mifare Classic Functions ******/
+
+/**************************************************************************/
+/*!
+ Indicates whether the specified block number is the first block
+ in the sector (block 0 relative to the current sector)
+*/
+/**************************************************************************/
+bool PN532::mifareclassic_IsFirstBlock (uint32_t uiBlock)
+{
+ // Test if we are in the small or big sectors
+ if (uiBlock < 128)
+ return ((uiBlock) % 4 == 0);
+ else
+ return ((uiBlock) % 16 == 0);
+}
+
+/**************************************************************************/
+/*!
+ Indicates whether the specified block number is the sector trailer
+*/
+/**************************************************************************/
+bool PN532::mifareclassic_IsTrailerBlock (uint32_t uiBlock)
+{
+ // Test if we are in the small or big sectors
+ if (uiBlock < 128)
+ return ((uiBlock + 1) % 4 == 0);
+ else
+ return ((uiBlock + 1) % 16 == 0);
+}
+
+/**************************************************************************/
+/*!
+ Tries to authenticate a block of memory on a MIFARE card using the
+ INDATAEXCHANGE command. See section 7.3.8 of the PN532 User Manual
+ for more information on sending MIFARE and other commands.
+
+ @param uid Pointer to a byte array containing the card UID
+ @param uidLen The length (in bytes) of the card's UID (Should
+ be 4 for MIFARE Classic)
+ @param blockNumber The block number to authenticate. (0..63 for
+ 1KB cards, and 0..255 for 4KB cards).
+ @param keyNumber Which key type to use during authentication
+ (0 = MIFARE_CMD_AUTH_A, 1 = MIFARE_CMD_AUTH_B)
+ @param keyData Pointer to a byte array containing the 6 byte
+ key value
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+uint8_t PN532::mifareclassic_AuthenticateBlock (uint8_t * uid, uint8_t uidLen, uint32_t blockNumber, uint8_t keyNumber, uint8_t * keyData)
+{
+ uint8_t i;
+
+ // Hang on to the key and uid data
+ memcpy (_key, keyData, 6);
+ memcpy (_uid, uid, uidLen);
+ _uidLen = uidLen;
+
+#ifdef MIFAREDEBUG
+ printf("Trying to authenticate card ");
+ PN532::PrintHex(_uid, _uidLen);
+ printf("Using authentication KEY %d: ", keyNumber ? 'B' : 'A');
+ PN532::PrintHex(_key, 6);
+#endif
+
+ // Prepare the authentication command //
+ pn532_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE; /* Data Exchange Header */
+ pn532_packetbuffer[1] = 1; /* Max card numbers */
+ pn532_packetbuffer[2] = (keyNumber) ? MIFARE_CMD_AUTH_B : MIFARE_CMD_AUTH_A;
+ pn532_packetbuffer[3] = blockNumber; /* Block Number (1K = 0..63, 4K = 0..255 */
+ memcpy (pn532_packetbuffer+4, _key, 6);
+ for (i = 0; i < _uidLen; i++)
+ {
+ pn532_packetbuffer[10+i] = _uid[i]; /* 4 byte card ID */
+ }
+
+ if (! sendCommandCheckAck(pn532_packetbuffer, 10+_uidLen))
+ return 0;
+
+ // Read the response packet
+ readdata(pn532_packetbuffer, 12);
+
+ // check if the response is valid and we are authenticated???
+ // for an auth success it should be bytes 5-7: 0xD5 0x41 0x00
+ // Mifare auth error is technically byte 7: 0x14 but anything other and 0x00 is not good
+ if (pn532_packetbuffer[7] != 0x00)
+ {
+#ifdef PN532DEBUG
+ printf("Authentification failed: ");
+ PN532::PrintHexChar(pn532_packetbuffer, 12);
+#endif
+ return 0;
+ }
+
+ return 1;
+}
+
+/**************************************************************************/
+/*!
+ Tries to read an entire 16-byte data block at the specified block
+ address.
+
+ @param blockNumber The block number to authenticate. (0..63 for
+ 1KB cards, and 0..255 for 4KB cards).
+ @param data Pointer to the byte array that will hold the
+ retrieved data (if any)
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+uint8_t PN532::mifareclassic_ReadDataBlock (uint8_t blockNumber, uint8_t * data)
+{
+#ifdef MIFAREDEBUG
+ printf("Trying to read 16 bytes from block %d\r\n", blockNumber);
+#endif
+
+ /* Prepare the command */
+ pn532_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE;
+ pn532_packetbuffer[1] = 1; /* Card number */
+ pn532_packetbuffer[2] = MIFARE_CMD_READ; /* Mifare Read command = 0x30 */
+ pn532_packetbuffer[3] = blockNumber; /* Block Number (0..63 for 1K, 0..255 for 4K) */
+
+ /* Send the command */
+ if (! sendCommandCheckAck(pn532_packetbuffer, 4))
+ {
+#ifdef MIFAREDEBUG
+ printf("Failed to receive ACK for read command\r\n");
+#endif
+ return 0;
+ }
+
+ /* Read the response packet */
+ readdata(pn532_packetbuffer, 26);
+
+ /* If byte 8 isn't 0x00 we probably have an error */
+ if (pn532_packetbuffer[7] != 0x00)
+ {
+#ifdef MIFAREDEBUG
+ printf("Unexpected response\r\n");
+ PN532::PrintHexChar(pn532_packetbuffer, 26);
+#endif
+ return 0;
+ }
+
+ /* Copy the 16 data bytes to the output buffer */
+ /* Block content starts at byte 9 of a valid response */
+ memcpy (data, pn532_packetbuffer+8, 16);
+
+ /* Display data for debug if requested */
+#ifdef MIFAREDEBUG
+ printf("Block %d\r\n", blockNumber);
+ PN532::PrintHexChar(data, 16);
+#endif
+
+ return 1;
+}
+
+/**************************************************************************/
+/*!
+ Tries to write an entire 16-byte data block at the specified block
+ address.
+
+ @param blockNumber The block number to authenticate. (0..63 for
+ 1KB cards, and 0..255 for 4KB cards).
+ @param data The byte array that contains the data to write.
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+uint8_t PN532::mifareclassic_WriteDataBlock (uint8_t blockNumber, uint8_t * data)
+{
+#ifdef MIFAREDEBUG
+ printf("Trying to write 16 bytes to block %d\r\n", blockNumber);
+#endif
+
+ /* Prepare the first command */
+ pn532_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE;
+ pn532_packetbuffer[1] = 1; /* Card number */
+ pn532_packetbuffer[2] = MIFARE_CMD_WRITE; /* Mifare Write command = 0xA0 */
+ pn532_packetbuffer[3] = blockNumber; /* Block Number (0..63 for 1K, 0..255 for 4K) */
+ memcpy (pn532_packetbuffer+4, data, 16); /* Data Payload */
+
+ /* Send the command */
+ if (! sendCommandCheckAck(pn532_packetbuffer, 20))
+ {
+#ifdef MIFAREDEBUG
+ printf("Failed to receive ACK for write command\r\n");
+#endif
+ return 0;
+ }
+ wait_ms(10);
+
+ /* Read the response packet */
+ readdata(pn532_packetbuffer, 26);
+
+ return 1;
+}
+
+/**************************************************************************/
+/*!
+ Formats a Mifare Classic card to store NDEF Records
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+uint8_t PN532::mifareclassic_FormatNDEF (void)
+{
+ uint8_t sectorbuffer1[16] = {0x14, 0x01, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1};
+ uint8_t sectorbuffer2[16] = {0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1, 0x03, 0xE1};
+ uint8_t sectorbuffer3[16] = {0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0x78, 0x77, 0x88, 0xC1, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+
+ // Note 0xA0 0xA1 0xA2 0xA3 0xA4 0xA5 must be used for key A
+ // for the MAD sector in NDEF records (sector 0)
+
+ // Write block 1 and 2 to the card
+ if (!(mifareclassic_WriteDataBlock (1, sectorbuffer1)))
+ return 0;
+ if (!(mifareclassic_WriteDataBlock (2, sectorbuffer2)))
+ return 0;
+ // Write key A and access rights card
+ if (!(mifareclassic_WriteDataBlock (3, sectorbuffer3)))
+ return 0;
+
+ // Seems that everything was OK (?!)
+ return 1;
+}
+
+/**************************************************************************/
+/*!
+ Writes an NDEF URI Record to the specified sector (1..15)
+
+ Note that this function assumes that the Mifare Classic card is
+ already formatted to work as an "NFC Forum Tag" and uses a MAD1
+ file system. You can use the NXP TagWriter app on Android to
+ properly format cards for this.
+
+ @param sectorNumber The sector that the URI record should be written
+ to (can be 1..15 for a 1K card)
+ @param uriIdentifier The uri identifier code (0 = none, 0x01 =
+ "http://www.", etc.)
+ @param url The uri text to write (max 38 characters).
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+uint8_t PN532::mifareclassic_WriteNDEFURI (uint8_t sectorNumber, uint8_t uriIdentifier, const char * url)
+{
+ // Figure out how long the string is
+ uint8_t len = strlen(url);
+
+ // Make sure we're within a 1K limit for the sector number
+ if ((sectorNumber < 1) || (sectorNumber > 15))
+ return 0;
+
+ // Make sure the URI payload is between 1 and 38 chars
+ if ((len < 1) || (len > 38))
+ return 0;
+
+ // Note 0xD3 0xF7 0xD3 0xF7 0xD3 0xF7 must be used for key A
+ // in NDEF records
+
+ // Setup the sector buffer (w/pre-formatted TLV wrapper and NDEF message)
+ uint8_t sectorbuffer1[16] = {0x00, 0x00, 0x03, (uint8_t)(len+5), 0xD1, 0x01, (uint8_t)(len+1), 0x55, uriIdentifier, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+ uint8_t sectorbuffer2[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+ uint8_t sectorbuffer3[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+ uint8_t sectorbuffer4[16] = {0xD3, 0xF7, 0xD3, 0xF7, 0xD3, 0xF7, 0x7F, 0x07, 0x88, 0x40, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+ if (len <= 6)
+ {
+ // Unlikely we'll get a url this short, but why not ...
+ memcpy (sectorbuffer1+9, url, len);
+ sectorbuffer1[len+9] = 0xFE;
+ }
+ else if (len == 7)
+ {
+ // 0xFE needs to be wrapped around to next block
+ memcpy (sectorbuffer1+9, url, len);
+ sectorbuffer2[0] = 0xFE;
+ }
+ else if ((len > 7) && (len <= 22))
+ {
+ // Url fits in two blocks
+ memcpy (sectorbuffer1+9, url, 7);
+ memcpy (sectorbuffer2, url+7, len-7);
+ sectorbuffer2[len-7] = 0xFE;
+ }
+ else if (len == 23)
+ {
+ // 0xFE needs to be wrapped around to final block
+ memcpy (sectorbuffer1+9, url, 7);
+ memcpy (sectorbuffer2, url+7, len-7);
+ sectorbuffer3[0] = 0xFE;
+ }
+ else
+ {
+ // Url fits in three blocks
+ memcpy (sectorbuffer1+9, url, 7);
+ memcpy (sectorbuffer2, url+7, 16);
+ memcpy (sectorbuffer3, url+23, len-24);
+ sectorbuffer3[len-22] = 0xFE;
+ }
+
+ // Now write all three blocks back to the card
+ if (!(mifareclassic_WriteDataBlock (sectorNumber*4, sectorbuffer1)))
+ return 0;
+ if (!(mifareclassic_WriteDataBlock ((sectorNumber*4)+1, sectorbuffer2)))
+ return 0;
+ if (!(mifareclassic_WriteDataBlock ((sectorNumber*4)+2, sectorbuffer3)))
+ return 0;
+ if (!(mifareclassic_WriteDataBlock ((sectorNumber*4)+3, sectorbuffer4)))
+ return 0;
+
+ // Seems that everything was OK (?!)
+ return 1;
+}
+
+/***** Mifare Ultralight Functions ******/
+
+/**************************************************************************/
+/*!
+ Tries to read an entire 4-byte page at the specified address.
+
+ @param page The page number (0..63 in most cases)
+ @param buffer Pointer to the byte array that will hold the
+ retrieved data (if any)
+*/
+/**************************************************************************/
+uint8_t PN532::mifareultralight_ReadPage (uint8_t page, uint8_t * buffer)
+{
+ if (page >= 64)
+ {
+#ifdef MIFAREDEBUG
+ printf("Page value out of range\r\n");
+#endif
+ return 0;
+ }
+
+#ifdef MIFAREDEBUG
+ printf("Reading page %d", page);
+#endif
+
+ /* Prepare the command */
+ pn532_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE;
+ pn532_packetbuffer[1] = 1; /* Card number */
+ pn532_packetbuffer[2] = MIFARE_CMD_READ; /* Mifare Read command = 0x30 */
+ pn532_packetbuffer[3] = page; /* Page Number (0..63 in most cases) */
+
+ /* Send the command */
+ if (! sendCommandCheckAck(pn532_packetbuffer, 4))
+ {
+#ifdef MIFAREDEBUG
+ printf("Failed to receive ACK for write command\r\n");
+#endif
+ return 0;
+ }
+
+ /* Read the response packet */
+ readdata(pn532_packetbuffer, 26);
+#ifdef MIFAREDEBUG
+ printf("Received: \r\n");
+ PN532::PrintHexChar(pn532_packetbuffer, 26);
+#endif
+
+ /* If byte 8 isn't 0x00 we probably have an error */
+ if (pn532_packetbuffer[7] == 0x00)
+ {
+ /* Copy the 4 data bytes to the output buffer */
+ /* Block content starts at byte 9 of a valid response */
+ /* Note that the command actually reads 16 byte or 4 */
+ /* pages at a time ... we simply discard the last 12 */
+ /* bytes */
+ memcpy (buffer, pn532_packetbuffer+8, 4);
+ }
+ else
+ {
+#ifdef MIFAREDEBUG
+ printf("Unexpected response reading block: \r\n");
+ PN532::PrintHexChar(pn532_packetbuffer, 26);
+#endif
+ return 0;
+ }
+
+ /* Display data for debug if requested */
+#ifdef MIFAREDEBUG
+ printf("Page %d\r\n", page);
+ PN532::PrintHexChar(buffer, 4);
+#endif
+
+ // Return OK signal
+ return 1;
+}
+
+/**************************************************************************/
+/*!
+ Tries to write an entire 4-byte page at the specified block
+ address.
+
+ @param page The page number to write. (0..63 for most cases)
+ @param data The byte array that contains the data to write.
+ Should be exactly 4 bytes long.
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+uint8_t PN532::mifareultralight_WritePage (uint8_t page, uint8_t * data)
+{
+
+ if (page >= 64)
+ {
+#ifdef MIFAREDEBUG
+ printf("Page value out of range\r\n");
+#endif
+ // Return Failed Signal
+ return 0;
+ }
+
+#ifdef MIFAREDEBUG
+ printf("Trying to write 4 byte page %d\r\n", page);
+#endif
+
+ /* Prepare the first command */
+ pn532_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE;
+ pn532_packetbuffer[1] = 1; /* Card number */
+ pn532_packetbuffer[2] = MIFARE_ULTRALIGHT_CMD_WRITE; /* Mifare Ultralight Write command = 0xA2 */
+ pn532_packetbuffer[3] = page; /* Page Number (0..63 for most cases) */
+ memcpy (pn532_packetbuffer+4, data, 4); /* Data Payload */
+
+ /* Send the command */
+ if (! sendCommandCheckAck(pn532_packetbuffer, 8))
+ {
+#ifdef MIFAREDEBUG
+ printf("Failed to receive ACK for write command\r\n");
+#endif
+
+ // Return Failed Signal
+ return 0;
+ }
+ wait_ms(10);
+
+ /* Read the response packet */
+ readdata(pn532_packetbuffer, 26);
+
+ // Return OK Signal
+ return 1;
+}
+
+
+/***** NTAG2xx Functions ******/
+
+/**************************************************************************/
+/*!
+ Tries to read an entire 4-byte page at the specified address.
+
+ @param page The page number (0..63 in most cases)
+ @param buffer Pointer to the byte array that will hold the
+ retrieved data (if any)
+*/
+/**************************************************************************/
+uint8_t PN532::ntag2xx_ReadPage (uint8_t page, uint8_t * buffer)
+{
+ // TAG Type PAGES USER START USER STOP
+ // -------- ----- ---------- ---------
+ // NTAG 203 42 4 39
+ // NTAG 213 45 4 39
+ // NTAG 215 135 4 129
+ // NTAG 216 231 4 225
+
+ if (page >= 231)
+ {
+#ifdef MIFAREDEBUG
+ printf("Page value out of range\r\n");
+#endif
+ return 0;
+ }
+
+#ifdef MIFAREDEBUG
+ printf("Reading page %d\r\n", page);
+#endif
+
+ /* Prepare the command */
+ pn532_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE;
+ pn532_packetbuffer[1] = 1; /* Card number */
+ pn532_packetbuffer[2] = MIFARE_CMD_READ; /* Mifare Read command = 0x30 */
+ pn532_packetbuffer[3] = page; /* Page Number (0..63 in most cases) */
+
+ /* Send the command */
+ if (! sendCommandCheckAck(pn532_packetbuffer, 4))
+ {
+#ifdef MIFAREDEBUG
+ printf("Failed to receive ACK for write command\r\n");
+#endif
+ return 0;
+ }
+
+ /* Read the response packet */
+ readdata(pn532_packetbuffer, 26);
+#ifdef MIFAREDEBUG
+ printf("Received: \r\n");
+ PN532::PrintHexChar(pn532_packetbuffer, 26);
+#endif
+
+ /* If byte 8 isn't 0x00 we probably have an error */
+ if (pn532_packetbuffer[7] == 0x00)
+ {
+ /* Copy the 4 data bytes to the output buffer */
+ /* Block content starts at byte 9 of a valid response */
+ /* Note that the command actually reads 16 byte or 4 */
+ /* pages at a time ... we simply discard the last 12 */
+ /* bytes */
+ memcpy(buffer, pn532_packetbuffer+8, 4);
+ }
+ else
+ {
+#ifdef MIFAREDEBUG
+ printf("Unexpected response reading block: \r\n");
+ PN532::PrintHexChar(pn532_packetbuffer, 26);
+#endif
+ return 0;
+ }
+
+ /* Display data for debug if requested */
+#ifdef MIFAREDEBUG
+ printf("Page %d\r\n", page);
+ PN532::PrintHexChar(buffer, 4);
+#endif
+
+ // Return OK signal
+ return 1;
+}
+
+/**************************************************************************/
+/*!
+ Tries to write an entire 4-byte page at the specified block
+ address.
+
+ @param page The page number to write. (0..63 for most cases)
+ @param data The byte array that contains the data to write.
+ Should be exactly 4 bytes long.
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+uint8_t PN532::ntag2xx_WritePage (uint8_t page, uint8_t * data)
+{
+ // TAG Type PAGES USER START USER STOP
+ // -------- ----- ---------- ---------
+ // NTAG 203 42 4 39
+ // NTAG 213 45 4 39
+ // NTAG 215 135 4 129
+ // NTAG 216 231 4 225
+
+ if ((page < 4) || (page > 225))
+ {
+#ifdef MIFAREDEBUG
+ printf("Page value out of range\r\n");
+#endif
+ // Return Failed Signal
+ return 0;
+ }
+
+#ifdef MIFAREDEBUG
+ printf("Trying to write 4 byte page %d\r\n%x\r\n", page, page);
+#endif
+
+ /* Prepare the first command */
+ pn532_packetbuffer[0] = PN532_COMMAND_INDATAEXCHANGE;
+ pn532_packetbuffer[1] = 1; /* Card number */
+ pn532_packetbuffer[2] = MIFARE_ULTRALIGHT_CMD_WRITE; /* Mifare Ultralight Write command = 0xA2 */
+ pn532_packetbuffer[3] = page; /* Page Number (0..63 for most cases) */
+ memcpy (pn532_packetbuffer+4, data, 4); /* Data Payload */
+
+ /* Send the command */
+ if (! sendCommandCheckAck(pn532_packetbuffer, 8))
+ {
+#ifdef MIFAREDEBUG
+ printf("Failed to receive ACK for write command\r\n");
+#endif
+
+ // Return Failed Signal
+ return 0;
+ }
+ wait_ms(10);
+
+ /* Read the response packet */
+ readdata(pn532_packetbuffer, 26);
+
+ // Return OK Signal
+ return 1;
+}
+
+/**************************************************************************/
+/*!
+ Writes an NDEF URI Record starting at the specified page (4..nn)
+
+ Note that this function assumes that the NTAG2xx card is
+ already formatted to work as an "NFC Forum Tag".
+
+ @param uriIdentifier The uri identifier code (0 = none, 0x01 =
+ "http://www.", etc.)
+ @param url The uri text to write (null-terminated string).
+ @param dataLen The size of the data area for overflow checks.
+
+ @returns 1 if everything executed properly, 0 for an error
+*/
+/**************************************************************************/
+uint8_t PN532::ntag2xx_WriteNDEFURI (uint8_t uriIdentifier, char * url, uint8_t dataLen)
+{
+ uint8_t pageBuffer[4] = { 0, 0, 0, 0 };
+
+ // Remove NDEF record overhead from the URI data (pageHeader below)
+ uint8_t wrapperSize = 12;
+
+ // Figure out how long the string is
+ uint8_t len = strlen(url);
+
+ // Make sure the URI payload will fit in dataLen (include 0xFE trailer)
+ if ((len < 1) || (len+1 > (dataLen-wrapperSize)))
+ return 0;
+
+ // Setup the record header
+ // See NFCForum-TS-Type-2-Tag_1.1.pdf for details
+ uint8_t pageHeader[12] =
+ {
+ /* NDEF Lock Control TLV (must be first and always present) */
+ 0x01, /* Tag Field (0x01 = Lock Control TLV) */
+ 0x03, /* Payload Length (always 3) */
+ 0xA0, /* The position inside the tag of the lock bytes (upper 4 = page address, lower 4 = byte offset) */
+ 0x10, /* Size in bits of the lock area */
+ 0x44, /* Size in bytes of a page and the number of bytes each lock bit can lock (4 bit + 4 bits) */
+ /* NDEF Message TLV - URI Record */
+ 0x03, /* Tag Field (0x03 = NDEF Message) */
+ (uint8_t)(len+5), /* Payload Length (not including 0xFE trailer) */
+ 0xD1, /* NDEF Record Header (TNF=0x1:Well known record + SR + ME + MB) */
+ 0x01, /* Type Length for the record type indicator */
+ (uint8_t)(len+1), /* Payload len */
+ 0x55, /* Record Type Indicator (0x55 or 'U' = URI Record) */
+ uriIdentifier /* URI Prefix (ex. 0x01 = "http://www.") */
+ };
+
+ // Write 12 byte header (three pages of data starting at page 4)
+ memcpy (pageBuffer, pageHeader, 4);
+ if (!(ntag2xx_WritePage (4, pageBuffer)))
+ return 0;
+ memcpy (pageBuffer, pageHeader+4, 4);
+ if (!(ntag2xx_WritePage (5, pageBuffer)))
+ return 0;
+ memcpy (pageBuffer, pageHeader+8, 4);
+ if (!(ntag2xx_WritePage (6, pageBuffer)))
+ return 0;
+
+ // Write URI (starting at page 7)
+ uint8_t currentPage = 7;
+ char * urlcopy = url;
+ while(len)
+ {
+ if (len < 4)
+ {
+ memset(pageBuffer, 0, 4);
+ memcpy(pageBuffer, urlcopy, len);
+ pageBuffer[len] = 0xFE; // NDEF record footer
+ if (!(ntag2xx_WritePage (currentPage, pageBuffer)))
+ return 0;
+ // DONE!
+ return 1;
+ }
+ else if (len == 4)
+ {
+ memcpy(pageBuffer, urlcopy, len);
+ if (!(ntag2xx_WritePage (currentPage, pageBuffer)))
+ return 0;
+ memset(pageBuffer, 0, 4);
+ pageBuffer[0] = 0xFE; // NDEF record footer
+ currentPage++;
+ if (!(ntag2xx_WritePage (currentPage, pageBuffer)))
+ return 0;
+ // DONE!
+ return 1;
+ }
+ else
+ {
+ // More than one page of data left
+ memcpy(pageBuffer, urlcopy, 4);
+ if (!(ntag2xx_WritePage (currentPage, pageBuffer)))
+ return 0;
+ currentPage++;
+ urlcopy+=4;
+ len-=4;
+ }
+ }
+
+ // Seems that everything was OK (?!)
+ return 1;
+}
+
+
+/************** high level communication functions (handles both I2C and SPI) */
+
+
+/**************************************************************************/
+/*!
+ @brief Tries to read the SPI or I2C ACK signal
+*/
+/**************************************************************************/
+bool PN532::readack() {
+ uint8_t ackbuff[6];
+
+ readdata(ackbuff, 6);
+
+ return (0 == strncmp((char *)ackbuff, (char *)pn532ack, 6));
+}
+
+
+/**************************************************************************/
+/*!
+ @brief Return true if the PN532 is ready with a response.
+*/
+/**************************************************************************/
+bool PN532::isready() {
+ // SPI read status and check if ready.
+ _ss = 0;
+ wait_ms(2);
+ spi_write(PN532_SPI_STATREAD);
+ // read byte
+ uint8_t x = spi_read();
+
+ _ss = 1;
+
+ // Check if status is ready.
+ return x == PN532_SPI_READY;
+}
+
+/**************************************************************************/
+/*!
+ @brief Waits until the PN532 is ready.
+
+ @param timeout Timeout before giving up
+*/
+/**************************************************************************/
+bool PN532::waitready(uint16_t timeout) {
+ uint16_t timer = 0;
+ while(!isready()) {
+ if (timeout != 0) {
+ timer += 10;
+ if (timer > timeout) {
+ printf("TIMEOUT\r\n");
+ return false;
+ }
+ }
+ wait_ms(10);
+ }
+ return true;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads n bytes of data from the PN532 via SPI or I2C.
+
+ @param buff Pointer to the buffer where data will be written
+ @param n Number of bytes to be read
+*/
+/**************************************************************************/
+void PN532::readdata(uint8_t* buff, uint8_t n) {
+ _ss = 0;
+ wait_ms(2);
+ spi_write(PN532_SPI_DATAREAD);
+
+#ifdef PN532DEBUG
+ printf("Reading: ");
+#endif
+ for (uint8_t i=0; i<n; i++) {
+ wait_ms(1);
+ buff[i] = spi_read();
+#ifdef PN532DEBUG
+ printf(" 0x%x", buff[i]);
+#endif
+ }
+
+ _ss = 1;
+
+#ifdef PN532DEBUG
+ printf("\r\n");
+#endif
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes a command to the PN532, automatically inserting the
+ preamble and required frame details (checksum, len, etc.)
+
+ @param cmd Pointer to the command buffer
+ @param cmdlen Command length in bytes
+*/
+/**************************************************************************/
+void PN532::writecommand(uint8_t* cmd, uint8_t cmdlen) {
+ // SPI command write.
+ uint8_t checksum;
+
+ cmdlen++;
+
+#ifdef PN532DEBUG
+ printf("\nSending: ");
+#endif
+
+ _ss = 0;
+ wait_ms(2); // or whatever the delay is for waking up the board
+ spi_write(PN532_SPI_DATAWRITE);
+
+ checksum = PN532_PREAMBLE + PN532_PREAMBLE + PN532_STARTCODE2;
+ spi_write(PN532_PREAMBLE);
+ spi_write(PN532_PREAMBLE);
+ spi_write(PN532_STARTCODE2);
+
+ spi_write(cmdlen);
+ spi_write(~cmdlen + 1);
+
+ spi_write(PN532_HOSTTOPN532);
+ checksum += PN532_HOSTTOPN532;
+
+#ifdef PN532DEBUG
+ printf(" 0x%x", PN532_PREAMBLE);
+ printf(" 0x%x", PN532_PREAMBLE);
+ printf(" 0x%x", PN532_STARTCODE2);
+ printf(" 0x%x", cmdlen);
+ printf(" 0x%x", ~cmdlen + 1);
+ printf(" 0x%x", PN532_HOSTTOPN532);
+#endif
+
+ for (uint8_t i=0; i<cmdlen-1; i++) {
+ spi_write(cmd[i]);
+ checksum += cmd[i];
+#ifdef PN532DEBUG
+ printf(" 0x%x", cmd[i]);
+#endif
+ }
+
+ spi_write(~checksum);
+ spi_write(PN532_POSTAMBLE);
+ _ss = 1;
+
+#ifdef PN532DEBUG
+ printf(" 0x%x", ~checksum);
+ printf(" 0x%x", PN532_POSTAMBLE);
+ printf("\r\n");
+#endif
+
+}
+
+void PN532::spi_write(uint8_t c) {
+ uint8_t reversed = __RBIT(c) >> 24;
+ _spi.write(reversed);
+}
+
+uint8_t PN532::spi_read() {
+ uint8_t reversed = _spi.write(0x0);
+ return __RBIT(reversed) >> 24;
+}
+
diff -r 000000000000 -r d2a284d0a714 pn532.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/pn532.h Mon Mar 13 15:29:28 2017 +0000
@@ -0,0 +1,213 @@
+/**************************************************************************/
+/*!
+ @file pn532.h
+ @author Adafruit Industries
+ @license BSD (see license.txt)
+
+
+ This is a library for the Adafruit PN532 NFC/RFID breakout boards
+ This library works with the Adafruit NFC breakout
+ ----> https://www.adafruit.com/products/364
+
+ Check out the links above for our tutorials and wiring diagrams
+ These chips use SPI or I2C to communicate.
+
+ Adafruit invests time and resources providing this open source code,
+ please support Adafruit and open-source hardware by purchasing
+ products from Adafruit!
+
+ @section HISTORY
+
+ v2.0 - Refactored to add I2C support from Adafruit_NFCShield_I2C library.
+
+ v1.1 - Added full command list
+ - Added 'verbose' mode flag to constructor to toggle debug output
+ - Changed readPassiveTargetID() to return variable length values
+
+*/
+/**************************************************************************/
+
+#ifndef PN532_H
+#define PN532_H
+#include "mbed.h"
+
+#define PN532_PREAMBLE (0x00)
+#define PN532_STARTCODE1 (0x00)
+#define PN532_STARTCODE2 (0xFF)
+#define PN532_POSTAMBLE (0x00)
+
+#define PN532_HOSTTOPN532 (0xD4)
+#define PN532_PN532TOHOST (0xD5)
+
+// PN532 Commands
+#define PN532_COMMAND_DIAGNOSE (0x00)
+#define PN532_COMMAND_GETFIRMWAREVERSION (0x02)
+#define PN532_COMMAND_GETGENERALSTATUS (0x04)
+#define PN532_COMMAND_READREGISTER (0x06)
+#define PN532_COMMAND_WRITEREGISTER (0x08)
+#define PN532_COMMAND_READGPIO (0x0C)
+#define PN532_COMMAND_WRITEGPIO (0x0E)
+#define PN532_COMMAND_SETSERIALBAUDRATE (0x10)
+#define PN532_COMMAND_SETPARAMETERS (0x12)
+#define PN532_COMMAND_SAMCONFIGURATION (0x14)
+#define PN532_COMMAND_POWERDOWN (0x16)
+#define PN532_COMMAND_RFCONFIGURATION (0x32)
+#define PN532_COMMAND_RFREGULATIONTEST (0x58)
+#define PN532_COMMAND_INJUMPFORDEP (0x56)
+#define PN532_COMMAND_INJUMPFORPSL (0x46)
+#define PN532_COMMAND_INLISTPASSIVETARGET (0x4A)
+#define PN532_COMMAND_INATR (0x50)
+#define PN532_COMMAND_INPSL (0x4E)
+#define PN532_COMMAND_INDATAEXCHANGE (0x40)
+#define PN532_COMMAND_INCOMMUNICATETHRU (0x42)
+#define PN532_COMMAND_INDESELECT (0x44)
+#define PN532_COMMAND_INRELEASE (0x52)
+#define PN532_COMMAND_INSELECT (0x54)
+#define PN532_COMMAND_INAUTOPOLL (0x60)
+#define PN532_COMMAND_TGINITASTARGET (0x8C)
+#define PN532_COMMAND_TGSETGENERALBYTES (0x92)
+#define PN532_COMMAND_TGGETDATA (0x86)
+#define PN532_COMMAND_TGSETDATA (0x8E)
+#define PN532_COMMAND_TGSETMETADATA (0x94)
+#define PN532_COMMAND_TGGETINITIATORCOMMAND (0x88)
+#define PN532_COMMAND_TGRESPONSETOINITIATOR (0x90)
+#define PN532_COMMAND_TGGETTARGETSTATUS (0x8A)
+
+#define PN532_RESPONSE_INDATAEXCHANGE (0x41)
+#define PN532_RESPONSE_INLISTPASSIVETARGET (0x4B)
+
+#define PN532_WAKEUP (0x55)
+
+#define PN532_SPI_STATREAD (0x02)
+#define PN532_SPI_DATAWRITE (0x01)
+#define PN532_SPI_DATAREAD (0x03)
+#define PN532_SPI_READY (0x01)
+
+#define PN532_I2C_ADDRESS (0x48 >> 1)
+#define PN532_I2C_READBIT (0x01)
+#define PN532_I2C_BUSY (0x00)
+#define PN532_I2C_READY (0x01)
+#define PN532_I2C_READYTIMEOUT (20)
+
+#define PN532_MIFARE_ISO14443A (0x00)
+
+// Mifare Commands
+#define MIFARE_CMD_AUTH_A (0x60)
+#define MIFARE_CMD_AUTH_B (0x61)
+#define MIFARE_CMD_READ (0x30)
+#define MIFARE_CMD_WRITE (0xA0)
+#define MIFARE_CMD_TRANSFER (0xB0)
+#define MIFARE_CMD_DECREMENT (0xC0)
+#define MIFARE_CMD_INCREMENT (0xC1)
+#define MIFARE_CMD_STORE (0xC2)
+#define MIFARE_ULTRALIGHT_CMD_WRITE (0xA2)
+
+// Prefixes for NDEF Records (to identify record type)
+#define NDEF_URIPREFIX_NONE (0x00)
+#define NDEF_URIPREFIX_HTTP_WWWDOT (0x01)
+#define NDEF_URIPREFIX_HTTPS_WWWDOT (0x02)
+#define NDEF_URIPREFIX_HTTP (0x03)
+#define NDEF_URIPREFIX_HTTPS (0x04)
+#define NDEF_URIPREFIX_TEL (0x05)
+#define NDEF_URIPREFIX_MAILTO (0x06)
+#define NDEF_URIPREFIX_FTP_ANONAT (0x07)
+#define NDEF_URIPREFIX_FTP_FTPDOT (0x08)
+#define NDEF_URIPREFIX_FTPS (0x09)
+#define NDEF_URIPREFIX_SFTP (0x0A)
+#define NDEF_URIPREFIX_SMB (0x0B)
+#define NDEF_URIPREFIX_NFS (0x0C)
+#define NDEF_URIPREFIX_FTP (0x0D)
+#define NDEF_URIPREFIX_DAV (0x0E)
+#define NDEF_URIPREFIX_NEWS (0x0F)
+#define NDEF_URIPREFIX_TELNET (0x10)
+#define NDEF_URIPREFIX_IMAP (0x11)
+#define NDEF_URIPREFIX_RTSP (0x12)
+#define NDEF_URIPREFIX_URN (0x13)
+#define NDEF_URIPREFIX_POP (0x14)
+#define NDEF_URIPREFIX_SIP (0x15)
+#define NDEF_URIPREFIX_SIPS (0x16)
+#define NDEF_URIPREFIX_TFTP (0x17)
+#define NDEF_URIPREFIX_BTSPP (0x18)
+#define NDEF_URIPREFIX_BTL2CAP (0x19)
+#define NDEF_URIPREFIX_BTGOEP (0x1A)
+#define NDEF_URIPREFIX_TCPOBEX (0x1B)
+#define NDEF_URIPREFIX_IRDAOBEX (0x1C)
+#define NDEF_URIPREFIX_FILE (0x1D)
+#define NDEF_URIPREFIX_URN_EPC_ID (0x1E)
+#define NDEF_URIPREFIX_URN_EPC_TAG (0x1F)
+#define NDEF_URIPREFIX_URN_EPC_PAT (0x20)
+#define NDEF_URIPREFIX_URN_EPC_RAW (0x21)
+#define NDEF_URIPREFIX_URN_EPC (0x22)
+#define NDEF_URIPREFIX_URN_NFC (0x23)
+
+#define PN532_GPIO_VALIDATIONBIT (0x80)
+#define PN532_GPIO_P30 (0)
+#define PN532_GPIO_P31 (1)
+#define PN532_GPIO_P32 (2)
+#define PN532_GPIO_P33 (3)
+#define PN532_GPIO_P34 (4)
+#define PN532_GPIO_P35 (5)
+
+class PN532{
+ public:
+ PN532(PinName mosi, PinName miso, PinName sck, PinName ss); // SPI
+ void begin(void);
+
+ // Generic PN532 functions
+ bool SAMConfig(void);
+ uint32_t getFirmwareVersion(void);
+ bool sendCommandCheckAck(uint8_t *cmd, uint8_t cmdlen, uint16_t timeout = 1000);
+ bool writeGPIO(uint8_t pinstate);
+ uint8_t readGPIO(void);
+ bool setPassiveActivationRetries(uint8_t maxRetries);
+
+ // ISO14443A functions
+ bool readPassiveTargetID(uint8_t cardbaudrate, uint8_t * uid, uint8_t * uidLength, uint16_t timeout = 0); //timeout 0 means no timeout - will block forever.
+ bool inDataExchange(uint8_t * send, uint8_t sendLength, uint8_t * response, uint8_t * responseLength);
+ bool inListPassiveTarget();
+
+ // Mifare Classic functions
+ bool mifareclassic_IsFirstBlock (uint32_t uiBlock);
+ bool mifareclassic_IsTrailerBlock (uint32_t uiBlock);
+ uint8_t mifareclassic_AuthenticateBlock (uint8_t * uid, uint8_t uidLen, uint32_t blockNumber, uint8_t keyNumber, uint8_t * keyData);
+ uint8_t mifareclassic_ReadDataBlock (uint8_t blockNumber, uint8_t * data);
+ uint8_t mifareclassic_WriteDataBlock (uint8_t blockNumber, uint8_t * data);
+ uint8_t mifareclassic_FormatNDEF (void);
+ uint8_t mifareclassic_WriteNDEFURI (uint8_t sectorNumber, uint8_t uriIdentifier, const char * url);
+
+ // Mifare Ultralight functions
+ uint8_t mifareultralight_ReadPage (uint8_t page, uint8_t * buffer);
+ uint8_t mifareultralight_WritePage (uint8_t page, uint8_t * data);
+
+ // NTAG2xx functions
+ uint8_t ntag2xx_ReadPage (uint8_t page, uint8_t * buffer);
+ uint8_t ntag2xx_WritePage (uint8_t page, uint8_t * data);
+ uint8_t ntag2xx_WriteNDEFURI (uint8_t uriIdentifier, char * url, uint8_t dataLen);
+
+ // Help functions to display formatted text
+ static void PrintHex(const uint8_t * data, const uint32_t numBytes);
+ static void PrintHexChar(const uint8_t * pbtData, const uint32_t numBytes);
+
+ private:
+ uint8_t _uid[7]; // ISO14443A uid
+ uint8_t _uidLen; // uid len
+ uint8_t _key[6]; // Mifare Classic key
+ uint8_t _inListedTag; // Tg number of inlisted tag.
+ bool _usingSPI;
+ SPI _spi;
+ DigitalOut _ss;
+
+ // Low level communication functions that handle both SPI and I2C.
+ void readdata(uint8_t* buff, uint8_t n);
+ void writecommand(uint8_t* cmd, uint8_t cmdlen);
+ bool isready();
+ bool waitready(uint16_t timeout);
+ bool readack();
+
+ // Low-level SPI primitives
+ void spi_write(uint8_t c);
+ uint8_t spi_read();
+};
+
+#endif
+