Diff: main.cpp

Revision:

0:b7728b6800cc

Child:

2:75dd587ca336

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Mar 29 20:30:04 2016 +0000
@@ -0,0 +1,69 @@
+/* Programme d'exemple d'utilisation de la librairie pour carte MyLabLib
+ * 
+ * Vous devez exporter ce programme pour l'IDE LPCXpresso 
+ * 
+ *
+ */
+#include "mbed.h"
+
+#include "MyLab_Lib.h"
+
+// Initialisation lcd (Pin E,Pin RW,Pin A0,Pin CS,Pin Data0...Data7)
+C12832 lcd(P0_1,P0_22,P0_24,P0_0,P2_0,P2_1,P2_2,P2_3,P2_4,P2_5,P2_6,P2_7);
+// Initialisation communication UART ser(Pin UART_Tx,Pin UART_RX)
+Serial ser(P0_2,P0_3);
+// Initialisation accéléromètre Acc(Pin I2C_SDA,Pin I2C_SCL,Adresse acc)
+MMA7660FC Acc(P0_27,P0_28, ADDR_MMA7660);
+// Initialisation periph pour MyLab(Pin JoyNord,Pin JoyCentre,Pin JoySud,Pin JoyEst,PinJoyWest,Pin Micro,Pin Audio_out,Pin CaptR,Pin CaptG,Pin CaptB)
+MyLab periph(P2_10,P2_8,P2_12,P2_11,P2_13,P0_23,P0_26,P0_25,P1_30,P1_31);
+// Initialisation led Mylab(Pin Led0..Pin Led7)
+BusOut leds(P0_4,P0_5,P0_6,P0_7,P0_8,P0_9,P0_10,P0_11);
+
+
+int main() {
+    printMenu(0);
+    while(1) {
+
+        switch (setMenu()) {
+            case 1:
+                lcd.cls();
+                lcd.locate(0,0);
+                lcd.printf("Lecture de deux notes");
+                periph.PlayNote(969.0, 1, 1);
+                periph.PlayNote(800.0, 1, 0.5);
+                wait(1);
+                select_app=0;
+                printMenu(0);
+                break;
+            case 2:
+                lcd.cls();
+                lcd.locate(0,0);
+                lcd.printf("Enregistrement en cours");
+                periph.Sound_Record(periph.dat);
+                lcd.cls();
+                lcd.locate(0,0);
+                lcd.printf("Enregistrement termine");
+                wait(1);
+                lcd.cls();
+                lcd.locate(0,0);
+                lcd.printf("Lecture de l'enregistrement");
+                periph.Sound_Play(periph.dat);
+                wait(1);
+                select_app=0;
+                printMenu(0);
+                break;
+            case 3:
+                lcd.cls();
+                lcd.locate(0,0);
+                lcd.printf("Valeur acc en x :");
+                for (int var = 0; var < 200; ++var) {
+                    periph.val_x = periph.Acc_X_Mesure();
+                    lcd.locate(0,12);
+                    lcd.printf("%f",periph.val_x);
+                }
+                select_app=0;
+                printMenu(0);
+                break;
+        }
+    }
+}
\ No newline at end of file