![](/media/cache/profiles/IMG_2753.JPG.50x50_q85.jpg)
Ejemplos varios de PWM
Diff: main.cpp
- Revision:
- 0:b3c72630f04c
diff -r 000000000000 -r b3c72630f04c main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Fri Feb 07 20:18:51 2020 +0000 @@ -0,0 +1,81 @@ +/* +Exercise : Create a PWM signal which we can see on an +oscilloscope. The following code will generate a 100 Hz +pulse with 50% duty cycle +*/ + + +#include "mbed.h" +PwmOut PWM1(p21); +int main() +{ + PWM1.period(0.010); // set PWM period to 10 ms + PWM1=0.5; // set duty cycle to 50% +} + +/* +Exercise : This example code uses a pulse width +modulation signal to increase and decrease +the brightness of the onboard LED +The program requires the use of a host terminal +application to communicate the +brightness value to the mbed, in this example by +using the ‘u’ and ‘d’ keys +*/ + + + +// host terminal LED dimmer control +#include "mbed.h" +Serial pc(USBTX, USBRX); // tx, rx +PwmOut led(LED1); +float brightness=0.0; +int main() +{ + pc.printf(“Control of LED dimmer by host terminal\n\r"); + pc.printf("Press 'u‘ = brighter, 'd‘ = dimmer\n\r"); + while(1) { + char c = pc.getc(); + wait(0.001); + if((c == 'u') && (brightness < 0.1)) { + brightness += 0.001; + led = brightness; + } + if((c == 'd') && (brightness > 0.0)) { + brightness -= 0.001; + led = brightness; + } + pc.printf("%c %1.3f \n \r",c,brightness); + } +} + +/* + +Exercise 7: We are going to use the PWM to play the start of an +old English folk tune ‘Oranges and Lemons’. If you’re a reader of +music you will recognise this in the Figure below +• You just need to know that any note which is a minim lasts twice +as long as a crotchet, which in turn lasts twice as long as a quaver + +The following program implements the ‘Oranges and Lemons‘ musical +output +*/ + +// Oranges and Lemons program +#include "mbed.h" +PwmOut buzzer(p21); +float frequency[]= {659,554,659,554,550,494,554,587,494,659,554,440}; +//frequency array +float beat[]= {1,1,1,1,1,0.5,0.5,1,1,1,1,2}; +//beat array +int main() +{ + while (1) { + for (int i=0; i<=11; i++) { + buzzer.period(1/(frequency[i])); // set PWM period + buzzer=0.5; // set duty cycle + wait(0.5*beat[i]); // hold for beat period + } + } +} +