![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
I2C not yet integrated
Tested working with single and differential voltages.
Connect SCL (pin 11) to D15 Connect SDA (pin 10) to D14 Connect pin 16 to +5v Connect pin 9 to gnd
Diff: main.cpp
- Revision:
- 0:1473318f27b6
- Child:
- 1:4e4194db7cd6
diff -r 000000000000 -r 1473318f27b6 main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Wed Nov 16 15:54:08 2016 +0000 @@ -0,0 +1,62 @@ +#include "mbed.h" +#include "LTC2991.h" +//#include <Wire.h> +#include <stdarg.h> + +int8_t ack; // 0 == ack, 1 == no ack +const uint16_t LTC2991_TIMEOUT=1000; //!< Configures the maximum timeout allowed for an LTC2991 read. +Serial pc(USBTX, USBRX, 9600); + +void setup(); +int main(); +void readSingle(); +void readDiff(); + + +void setup() { + //Wire.begin(); + + while (true) + { + pc.printf("boot\n"); + ack |= LTC2991_register_write(LTC2991_I2C_ADDRESS, LTC2991_CHANNEL_ENABLE_REG, LTC2991_ENABLE_ALL_CHANNELS); //! Enables all channels + ack |= LTC2991_register_write(LTC2991_I2C_ADDRESS, LTC2991_CONTROL_V1234_REG, 0x00); //! Sets registers to default starting values. + ack |= LTC2991_register_write(LTC2991_I2C_ADDRESS, LTC2991_CONTROL_V5678_REG, 0x00); + ack |= LTC2991_register_write(LTC2991_I2C_ADDRESS, LTC2991_CONTROL_PWM_Tinternal_REG, LTC2991_REPEAT_MODE); //! Configures LTC2991 for Repeated Acquisition mode + if (ack != 0) { + pc.printf("Error: No Acknowledge. Check I2C Address.\n"); + wait_ms(500); + } else { + break; + } + } +} + +int main() { + setup(); + while(1) { + readDiff(); + wait_ms(750); + } +} + +void readSingle() { + int8_t data_valid; + int16_t code; + float voltage; + + ack |= LTC2991_register_set_clear_bits(LTC2991_I2C_ADDRESS, LTC2991_CONTROL_V1234_REG, 0x00, LTC2991_V1_V2_DIFFERENTIAL_ENABLE | LTC2991_V1_V2_TEMP_ENABLE); + ack |= LTC2991_adc_read_new_data(LTC2991_I2C_ADDRESS, LTC2991_V1_MSB_REG, &code, &data_valid, LTC2991_TIMEOUT); + voltage = LTC2991_code_to_single_ended_voltage(code, LTC2991_SINGLE_ENDED_lsb); + pc.printf("V1: %4.2f V", voltage); +} +void readDiff() { + int8_t data_valid; + int16_t code; + float voltage; + + ack |= LTC2991_register_set_clear_bits(LTC2991_I2C_ADDRESS, LTC2991_CONTROL_V1234_REG, LTC2991_V1_V2_DIFFERENTIAL_ENABLE, LTC2991_V1_V2_TEMP_ENABLE); + ack |= LTC2991_adc_read_new_data(LTC2991_I2C_ADDRESS, LTC2991_V2_MSB_REG, &code, &data_valid, LTC2991_TIMEOUT); + voltage = LTC2991_code_to_differential_voltage(code, LTC2991_DIFFERENTIAL_lsb); + pc.printf("V1-V2: %4.2f V", voltage); +} \ No newline at end of file