File content as of revision 12:8e9badbc7314:

/*
This program:
 - connects to a LoRaWAN by ABP/MANUAL
 - reads light data from an analogue Light Dependent Resistor
 - reads temperaure and humidity from a DHT22 sensor
 - sends the recorded data onto the LoRaWAN
 - sets the mDot to sleep
 - repeats these operations in a loop
*/

#include "mbed.h"
#include "mDot.h"
#include "ChannelPlans.h"
#include "MTSLog.h"
#include "dot_util.h"
#include "mbed.h"
#include "DHT22.h"
#include <string>
#include <vector>
#include <algorithm>
#include <sstream>
 
 //dht 22 pin (D6 on UDK 2)
 DHT22 dht22(PA_1);
 //analogue ldr pin (A0 on UDK 2)
 AnalogIn a0(PB_1);
 //Analogue soil moisture pin
 AnalogIn a2(PC_1);

// these options must match the settings on your Conduit
/*
Current test settings
dev address: 072389f7
net sess key: b35aca73d283996dc3cbc0803af04547
app sess key: d6f28430da4035273b9e3c07eb30c0dd
*/
//device address
static uint8_t network_address[] = { 0x06, 0xf0, 0xa4, 0x08 };
//network session key
static uint8_t network_session_key[] = { 0x93, 0xb7, 0xbd, 0xfc, 0xc6, 0x70, 0x4f, 0x60, 0x5b, 0xf8, 0x5a, 0xca, 0xb6, 0x78, 0xea, 0x69 };
//application sesssion or data session key
static uint8_t data_session_key[] = { 0x12, 0xf5, 0xb8, 0x32, 0x26, 0xcb, 0xa0, 0x9e, 0xfb, 0x59, 0x47, 0x7f, 0x6e, 0x66, 0xfd, 0x2f };
static uint8_t frequency_sub_band = 2; //VFI
static bool public_network = true;
//enable receipt of ackknowledge packets 0 = No, 1 = Yes
static uint8_t ack = 0;
//adaptive data rate enabler
static bool adr = false;

//USB serial 
Serial pc(USBTX, USBRX);

//get ourselves an mDot pointer - we will assign to it in main()
mDot* dot = NULL;

//converts value to string
template <typename T>
string ToString(T val) {
    stringstream stream;
    stream << val;
    return stream.str();
}

int main() {
    //setting serial rate
    pc.baud(9600);
    
    // use AU915 plan
    lora::ChannelPlan* plan = new lora::ChannelPlan_AU915();
    assert(plan);
    // get a mDot handle with the plan we chose
    dot = mDot::getInstance(plan);
    assert(dot); 
    
    if (!dot->getStandbyFlag()) {
        logInfo("mbed-os library version: %d", MBED_LIBRARY_VERSION);

        // start from a well-known state
        logInfo("defaulting Dot configuration");
        dot->resetConfig();
        dot->resetNetworkSession();

        // make sure library logging is turned on
        dot->setLogLevel(mts::MTSLog::DEBUG_LEVEL);

        // update configuration if necessary
        if (dot->getJoinMode() != mDot::MANUAL) {
            logInfo("changing network join mode to MANUAL");
            if (dot->setJoinMode(mDot::MANUAL) != mDot::MDOT_OK) {
                logError("failed to set network join mode to MANUAL");
            }
        }
        // in MANUAL join mode there is no join request/response transaction
        // as long as the Dot is configured correctly and provisioned correctly on the gateway, it should be able to communicate
        // network address - 4 bytes (00000001 - FFFFFFFE)
        // network session key - 16 bytes
        // data session key - 16 bytes
        // to provision your Dot with a Conduit gateway, follow the following steps
        //   * ssh into the Conduit
        //   * provision the Dot using the lora-query application: http://www.multitech.net/developer/software/lora/lora-network-server/
        //      lora-query -a 01020304 A 0102030401020304 <your Dot's device ID> 01020304010203040102030401020304 01020304010203040102030401020304
        //   * if you change the network address, network session key, or data session key, make sure you update them on the gateway
        // to provision your Dot with a 3rd party gateway, see the gateway or network provider documentation
        update_manual_config(network_address, network_session_key, data_session_key, frequency_sub_band, public_network, ack);


        // enable or disable Adaptive Data Rate
        dot->setAdr(adr);
        
        //* AU915 Datarates
        //* ---------------
        //* DR0 - SF10BW125 -- 11 bytes
        //* DR1 - SF9BW125 -- 53 bytes
        //* DR2 - SF8BW125 -- 129 byte
        //* DR3 - SF7BW125 -- 242 bytes
        //* DR4 - SF8BW500 -- 242 bytes
        dot->setTxDataRate(mDot::DR2);
        
        // save changes to configuration
        logInfo("saving configuration");
        if (!dot->saveConfig()) {
            logError("failed to save configuration");
        }

        // display configuration
        display_config();
    } else {
        // restore the saved session if the dot woke from deepsleep mode
        // useful to use with deepsleep because session info is otherwise lost when the dot enters deepsleep
        logInfo("restoring network session from NVM");
        dot->restoreNetworkSession();
    }
    
    //this is where the magic happens
    while (true) {
    
        //wake up
        wait(5);
        //init data variable
        std::vector<uint8_t> data;
        logInfo("Staring Light Readings:");
        //read LDR
        //read LDR as float (0.0-1.0, multiply by 1000)
        //read multiple times - this just smoothes the value out a little bit
        float ldr1 = a0.read() * 1000;
        //printf("%d\n", ldr1);
        wait_ms(100);
        float ldr2 = a0.read() * 1000;
        //printf("%d\n", ldr2);
        wait_ms(100);
        float ldr3 = a0.read() * 1000;
        //printf("%d\n", ldr3);
        wait_ms(100);
        //average the multiple readings
        
        float ldr = (ldr1 + ldr2 + ldr3) / 3;

        logInfo("All light readings taken");
        logInfo("Starting Moisture readings:");
        
        //read sensor
        //read multiple times - this just smoothes the value out a little bit
        float moist1 = a2.read() * 1023;
        wait_ms(100);
        float moist2 = a2.read() * 1023;
        wait_ms(100);
        float moist3 = a2.read() * 1023;
        wait_ms(100);
        //average the multiple readings
        float moistF = (moist1 + moist2 + moist3) / 3;
        
        logInfo("All Moisture readings taken");
        logInfo("Starting Temp and Humidity readings");        
        
        //read DHT22
        //get dht22 sample
        int error = dht22.sample();
        //sampling is a little slow - give it time
        wait_ms(100);
        //it's required to divide these values by ten for some reason
        float h = (float)dht22.getHumidity() / 10;
        float t = (float)dht22.getTemperature() / 10;
    
        //build our output string now
        string l_str = ToString(ldr);
        string h_str = ToString(h);
        string t_str = ToString(t);
        string m_str = ToString(moistF);
        string output = "L:" + l_str + " H:" + h_str + " T:" + t_str + "M:" + m_str;   
        
    
        //serial output for debugging
        logInfo("Sending %s", output.c_str());
        
        // format data for sending to the gateway
        for (std::string::iterator it = output.begin(); it != output.end(); it++)
            data.push_back((uint8_t) *it);
    
        //now send
        send_data(data);
        logInfo("Data sent!");

        // go to sleep and wake up automatically sleep_time seconds later 
        uint32_t sleep_time = 20;
        //false is "don't deep sleep" - mDot doesn't do that 
        dot->sleep(sleep_time, mDot::RTC_ALARM, false);
    }
 
    return 0; //shouldn't happen
}