Example of Mbed filesystem using HeapBlockDevice

Dependents:   TemperatureButtonFile AccelleratorRead

main.cpp

Committer:
mbed_official
Date:
2018-09-26
Revision:
25:65a9183a2178
Parent:
12:a07d0af60cc6
Child:
26:130bb1173866

File content as of revision 25:65a9183a2178:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "mbed.h"
#include <stdio.h>
#include <errno.h>

// Block devices
#if COMPONENT_SPIF
#include "SPIFBlockDevice.h"
#endif

#if COMPONENT_DATAFLASH
#include "DataFlashBlockDevice.h"
#endif 

#if COMPONENT_SD
#include "SDBlockDevice.h"
#endif 

#include "HeapBlockDevice.h"

// File systems
#include "LittleFileSystem.h"
#include "FATFileSystem.h"


// Physical block device, can be any device that supports the BlockDevice API
SPIFBlockDevice bd(
        MBED_CONF_SPIF_DRIVER_SPI_MOSI,
        MBED_CONF_SPIF_DRIVER_SPI_MISO,
        MBED_CONF_SPIF_DRIVER_SPI_CLK,
        MBED_CONF_SPIF_DRIVER_SPI_CS);

// File system declaration
LittleFileSystem fs("fs");


// Set up the button to trigger an erase
InterruptIn irq(BUTTON1);
void erase() {
    printf("Initializing the block device... ");
    fflush(stdout);
    int err = bd.init();
    printf("%s\n", (err ? "Fail :(" : "OK"));
    if (err) {
        error("error: %s (%d)\n", strerror(-err), err);
    }

    printf("Erasing the block device... ");
    fflush(stdout);
    err = bd.erase(0, bd.size());
    printf("%s\n", (err ? "Fail :(" : "OK"));
    if (err) {
        error("error: %s (%d)\n", strerror(-err), err);
    }

    printf("Deinitializing the block device... ");
    fflush(stdout);
    err = bd.deinit();
    printf("%s\n", (err ? "Fail :(" : "OK"));
    if (err) {
        error("error: %s (%d)\n", strerror(-err), err);
    }
}


// Entry point for the example
int main() {
    printf("--- Mbed OS filesystem example ---\n");

    // Setup the erase event on button press, use the event queue
    // to avoid running in interrupt context
    irq.fall(mbed_event_queue()->event(erase));

    // Try to mount the filesystem
    printf("Mounting the filesystem... ");
    fflush(stdout);
    int err = fs.mount(&bd);
    printf("%s\n", (err ? "Fail :(" : "OK"));
    if (err) {
        // Reformat if we can't mount the filesystem
        // this should only happen on the first boot
        printf("No filesystem found, formatting... ");
        fflush(stdout);
        err = fs.reformat(&bd);
        printf("%s\n", (err ? "Fail :(" : "OK"));
        if (err) {
            error("error: %s (%d)\n", strerror(-err), err);
        }
    }

    // Open the numbers file
    printf("Opening \"/fs/numbers.txt\"... ");
    fflush(stdout);
    FILE *f = fopen("/fs/numbers.txt", "r+");
    printf("%s\n", (!f ? "Fail :(" : "OK"));
    if (!f) {
        // Create the numbers file if it doesn't exist
        printf("No file found, creating a new file... ");
        fflush(stdout);
        f = fopen("/fs/numbers.txt", "w+");
        printf("%s\n", (!f ? "Fail :(" : "OK"));
        if (!f) {
            error("error: %s (%d)\n", strerror(errno), -errno);
        }

        for (int i = 0; i < 10; i++) {
            printf("\rWriting numbers (%d/%d)... ", i, 10);
            fflush(stdout);
            err = fprintf(f, "    %d\n", i);
            if (err < 0) {
                printf("Fail :(\n");
                error("error: %s (%d)\n", strerror(errno), -errno);
            }
        }
        printf("\rWriting numbers (%d/%d)... OK\n", 10, 10);

        printf("Seeking file... ");
        fflush(stdout);
        err = fseek(f, 0, SEEK_SET);
        printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
        if (err < 0) {
            error("error: %s (%d)\n", strerror(errno), -errno);
        }
    }

    // Go through and increment the numbers
    for (int i = 0; i < 10; i++) {
        printf("\rIncrementing numbers (%d/%d)... ", i, 10);
        fflush(stdout);

        // Get current stream position
        long pos = ftell(f);

        // Parse out the number and increment
        int32_t number;
        fscanf(f, "%d", &number);
        number += 1;

        // Seek to beginning of number
        fseek(f, pos, SEEK_SET);
    
        // Store number
        fprintf(f, "    %d\n", number);

        // Flush between write and read on same file
        fflush(f);
    }
    printf("\rIncrementing numbers (%d/%d)... OK\n", 10, 10);

    // Close the file which also flushes any cached writes
    printf("Closing \"/fs/numbers.txt\"... ");
    fflush(stdout);
    err = fclose(f);
    printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
    if (err < 0) {
        error("error: %s (%d)\n", strerror(errno), -errno);
    }
    
    // Display the root directory
    printf("Opening the root directory... ");
    fflush(stdout);
    DIR *d = opendir("/fs/");
    printf("%s\n", (!d ? "Fail :(" : "OK"));
    if (!d) {
        error("error: %s (%d)\n", strerror(errno), -errno);
    }

    printf("root directory:\n");
    while (true) {
        struct dirent *e = readdir(d);
        if (!e) {
            break;
        }

        printf("    %s\n", e->d_name);
    }

    printf("Closing the root directory... ");
    fflush(stdout);
    err = closedir(d);
    printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
    if (err < 0) {
        error("error: %s (%d)\n", strerror(errno), -errno);
    }

    // Display the numbers file
    printf("Opening \"/fs/numbers.txt\"... ");
    fflush(stdout);
    f = fopen("/fs/numbers.txt", "r");
    printf("%s\n", (!f ? "Fail :(" : "OK"));
    if (!f) {
        error("error: %s (%d)\n", strerror(errno), -errno);
    }

    printf("numbers:\n");
    while (!feof(f)) {
        int c = fgetc(f);
        printf("%c", c);
    }

    printf("\rClosing \"/fs/numbers.txt\"... ");
    fflush(stdout);
    err = fclose(f);
    printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
    if (err < 0) {
        error("error: %s (%d)\n", strerror(errno), -errno);
    }

    // Tidy up
    printf("Unmounting... ");
    fflush(stdout);
    err = fs.unmount();
    printf("%s\n", (err < 0 ? "Fail :(" : "OK"));
    if (err < 0) {
        error("error: %s (%d)\n", strerror(-err), err);
    }
        
    printf("Mbed OS filesystem example done!\n");
}