Diff: M24SR-DISCOVERY_hardware/mbed-STM32F103RGT6/PinNames.h

Revision:

0:ce5a25daadce

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/M24SR-DISCOVERY_hardware/mbed-STM32F103RGT6/PinNames.h	Thu Sep 22 10:43:55 2016 +0000
@@ -0,0 +1,206 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ *
+ * Modified for STM32F103C6T8 by Zoltan Hudak, 2016
+ *
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f3xx_hal_gpio.h and stm32f3xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM)  ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X)   (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X)   (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X)  (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT              (0)
+#define STM_MODE_OUTPUT_PP          (1)
+#define STM_MODE_OUTPUT_OD          (2)
+#define STM_MODE_AF_PP              (3)
+#define STM_MODE_AF_OD              (4)
+#define STM_MODE_ANALOG             (5)
+#define STM_MODE_IT_RISING          (6)
+#define STM_MODE_IT_FALLING         (7)
+#define STM_MODE_IT_RISING_FALLING  (8)
+#define STM_MODE_EVT_RISING         (9)
+#define STM_MODE_EVT_FALLING        (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET       (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble  = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X)  ((uint32_t)(X) & 0xF)
+
+    typedef enum {
+        PIN_INPUT,
+        PIN_OUTPUT
+    }
+    PinDirection;
+
+    typedef enum {
+        PA_0  = 0x00,
+        PA_1  = 0x01,
+        PA_2  = 0x02,
+        PA_3  = 0x03,
+        PA_4  = 0x04,
+        PA_5  = 0x05,
+        PA_6  = 0x06,
+        PA_7  = 0x07,
+        PA_8  = 0x08,
+        PA_9  = 0x09,
+        PA_10 = 0x0A,
+        PA_11 = 0x0B,
+        PA_12 = 0x0C,
+        PA_15 = 0x0F,
+
+        PB_0  = 0x10,
+        PB_1  = 0x11,
+        PB_3  = 0x13,
+        PB_4  = 0x14,
+        PB_5  = 0x15,
+        PB_6  = 0x16,
+        PB_7  = 0x17,
+        PB_8  = 0x18,
+        PB_9  = 0x19,
+        PB_10 = 0x1A,
+        PB_11 = 0x1B,
+        PB_12 = 0x1C,
+        PB_13 = 0x1D,
+        PB_14 = 0x1E,
+        PB_15 = 0x1F,
+
+        PC_0  = 0x20,
+        PC_1  = 0x21,
+        PC_2  = 0x22,
+        PC_3  = 0x23,
+        PC_4  = 0x24,
+        PC_5  = 0x25,
+        PC_6  = 0x26,
+        PC_7  = 0x27,
+        PC_8  = 0x28,
+        PC_9  = 0x29,
+        PC_10 = 0x2A,
+        PC_11 = 0x2B,
+        PC_12 = 0x2C,
+        PC_13 = 0x2D,
+        PC_14 = 0x2E,
+        PC_15 = 0x2F,
+
+
+
+        // Arduino connector namings
+        A0          = PA_0,
+        A1          = PA_1,
+        A2          = PA_4,
+        A3          = PB_0,
+        D0          = PA_3,
+        D1          = PA_2,
+        D2          = PA_10,
+        D3          = PB_3,
+        D4          = PB_5,
+        D5          = PB_4,
+        D6          = PB_10,
+        D7          = PA_8,
+        D8          = PA_9,
+        D10         = PB_6,
+        D11         = PA_7,
+        D12         = PA_6,
+        D13         = PA_5,
+        D14         = PB_9,
+        D15         = PB_8,
+        //m24sr discovery  names
+        BT_RESET  = PA_3,
+        M24SR_GPO  = PA_6,
+        M24SR_RF_disable = PA_7,
+        BT_POWER_ON = PA_10,
+        USB_DM = PA_11,
+        USB_DP = PA_12,
+        //JTMS = PA_13,
+        //JTCK = PA_14,
+        JTDI = PA_15,
+        USB_Disconnect = PB_0,
+        JTDO = PB_3,
+        JTRST = PB_4,
+        JOY_LEFT = PB_5,
+        JOY_SEL = PB_5,
+        JOY_DOWN = PB_7,
+        JOY_RIGHT = PB_8,
+        JOY_UP = PB_9,
+        M24SR_SCL = PB_10,
+        M24SR_SDA = PB_11,
+        LCD_CS = PB_12,
+        LCD_CLK = PB_13,
+        LCD_SDA = PB_15,
+        LCD_DC = PC_6,
+        TE_Output = PC_7,
+        STM32_TX = PC_10,
+        STM32_RX = PC_11,
+        BT_GPIO1 = PC_12,
+        LED1        = PC_3,
+        LED2        = PC_2,
+        LED3        = PC_1,
+        LED4        = PC_0,
+
+        // Generic signals namings
+
+        SERIAL_TX   = PC_10,
+        SERIAL_RX   = PC_11,
+        USBTX       = PA_2,
+        USBRX       = PA_3,
+        I2C_SCL     = PB_10,
+        I2C_SDA     = PB_11,
+        SPI_MOSI    = PA_7,
+        SPI_MISO    = PA_6,
+        SPI_SCK     = PA_5,
+        SPI_CS      = PB_6,
+        PWM_OUT     = PB_3,
+
+        // Not connected
+        NC = (int)0xFFFFFFFF
+    } PinName;
+
+    typedef enum {
+        PullNone  = 0,
+        PullUp    = 1,
+        PullDown  = 2,
+        OpenDrain = 3,
+        PullDefault = PullNone
+    } PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif