lloyd griffiths
Hardware testing for M24SR-DISCOVERY demo PCB. as help to others
Set up to use MB1138 M24SR-DISCOVERY PCB http://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/st25-nfc-rfid-eval-boards/st25-nfc-rfid-eval-boards/m24sr-discovery.html with MBED system. based on https://developer.mbed.org/users/hudakz/code/STM32F103C8T6_Hello/ code and https://developer.mbed.org/users/wim/notebook/m24sr64-nfcrfid-tag-with-i2c-interface/ Which lead me to look at Peter Drescher's work on ILI9341 LCD controller
https://developer.mbed.org/users/dreschpe/code/SPI_TFT_ILI9341/
Diff: M24SR-DISCOVERY_hardware/mbed-STM32F103RGT6/PinNames.h
- Revision:
- 2:2033db202017
- Parent:
- 1:3b0bd7db2092
--- a/M24SR-DISCOVERY_hardware/mbed-STM32F103RGT6/PinNames.h Thu Sep 22 11:15:01 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,206 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- *
- * Modified for STM32F103C6T8 by Zoltan Hudak, 2016
- *
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f3xx_hal_gpio.h and stm32f3xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
- typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
- }
- PinDirection;
-
- typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
-
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
- //m24sr discovery names
- BT_RESET = PA_3,
- M24SR_GPO = PA_6,
- M24SR_RF_disable = PA_7,
- BT_POWER_ON = PA_10,
- USB_DM = PA_11,
- USB_DP = PA_12,
- //JTMS = PA_13,
- //JTCK = PA_14,
- JTDI = PA_15,
- USB_Disconnect = PB_0,
- JTDO = PB_3,
- JTRST = PB_4,
- JOY_LEFT = PB_5,
- JOY_SEL = PB_5,
- JOY_DOWN = PB_7,
- JOY_RIGHT = PB_8,
- JOY_UP = PB_9,
- M24SR_SCL = PB_10,
- M24SR_SDA = PB_11,
- LCD_CS = PB_12,
- LCD_CLK = PB_13,
- LCD_SDA = PB_15,
- LCD_DC = PC_6,
- TE_Output = PC_7,
- STM32_TX = PC_10,
- STM32_RX = PC_11,
- BT_GPIO1 = PC_12,
- LED1 = PC_3,
- LED2 = PC_2,
- LED3 = PC_1,
- LED4 = PC_0,
-
- // Generic signals namings
-
- SERIAL_TX = PC_10,
- SERIAL_RX = PC_11,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_10,
- I2C_SDA = PB_11,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
- } PinName;
-
- typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
- } PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif