Li Weiyi / Mbed 2 deprecated ESP8266BlynkWeatherStation

work.

Dependencies:   Blynk mbed

main.cpp@1:0e75de2a5d21, 2016-06-13 (annotated)

Committer:
lixianyu
Date:
Mon Jun 13 02:21:11 2016 +0000
Revision:
1:0e75de2a5d21
Parent:
0:d8f4c441e032
Child:
2:6cd3b0947188
u8glib???????????????????????????Adafruit_GFX????OLED????????bitmap??????

Who changed what in which revision?

UserRevisionLine numberNew contents of line
lixianyu 0:d8f4c441e032 1 #include "mbed.h"
lixianyu 1:0e75de2a5d21 2
lixianyu 0:d8f4c441e032 3 #include "userDef.h"
lixianyu 0:d8f4c441e032 4 #include "sensor.h"
lixianyu 0:d8f4c441e032 5 #include "oled.h"
lixianyu 1:0e75de2a5d21 6 //#include "WiFiBlynk.h"
lixianyu 1:0e75de2a5d21 7 //#include "Adafruit_SSD1306.h"
lixianyu 0:d8f4c441e032 8
lixianyu 1:0e75de2a5d21 9 //Serial pc(D1, D0); // tx, rx
lixianyu 0:d8f4c441e032 10 DigitalOut myled(P0_13);
lixianyu 0:d8f4c441e032 11 Timer g_Timer;
lixianyu 1:0e75de2a5d21 12 //I2C g_i2c(P0_11, P0_10);//SDA, SCL
lixianyu 1:0e75de2a5d21 13 //Adafruit_SSD1306_I2c adaf(g_i2c, P0_13, 0x78, 64, 128);
lixianyu 0:d8f4c441e032 14 int main()
lixianyu 0:d8f4c441e032 15 {
lixianyu 1:0e75de2a5d21 16 //pc.baud(115200);
lixianyu 1:0e75de2a5d21 17 //myled = 0;
lixianyu 0:d8f4c441e032 18 int ms = 0;
lixianyu 0:d8f4c441e032 19 g_Timer.start();
lixianyu 1:0e75de2a5d21 20 //U8GLIB_SSD1306_MICRODUINO_128X64 u8glibhehe(U8G_I2C_OPT_NONE); //设置OLED型号
lixianyu 0:d8f4c441e032 21 //Serial.begin(9600); // See the connection status in Serial Monitor
lixianyu 0:d8f4c441e032 22 // Set ESP8266 baud rate
lixianyu 0:d8f4c441e032 23 //EspSerial.begin(115200);
lixianyu 0:d8f4c441e032 24
lixianyu 0:d8f4c441e032 25 //Blynk.begin(auth, wifi, SSID, PASS);
lixianyu 0:d8f4c441e032 26
lixianyu 0:d8f4c441e032 27 // Setup a function to be called every second
lixianyu 0:d8f4c441e032 28 //temHumtimer.setInterval(2000L, senTempHumi);
lixianyu 1:0e75de2a5d21 29 wait_ms(1000);
lixianyu 1:0e75de2a5d21 30 //Adafruit_SSD1306_I2c adaf(g_i2c, P0_13, 0x78, 64, 128);
lixianyu 1:0e75de2a5d21 31 //Adafruit_SSD1306_I2c adaf(g_i2c, P0_13);
lixianyu 1:0e75de2a5d21 32 wait_ms(2000);
lixianyu 1:0e75de2a5d21 33 //u8glibhehe.init_u8g();
lixianyu 1:0e75de2a5d21 34 oled_init();
lixianyu 0:d8f4c441e032 35 while(1) {
lixianyu 1:0e75de2a5d21 36 //printf("Enter while(1)\r\n");
lixianyu 1:0e75de2a5d21 37 myled = !myled;
lixianyu 0:d8f4c441e032 38 //Blynk.run(); // All the Blynk Magic happens here...
lixianyu 0:d8f4c441e032 39 //temHumtimer.run(); // Initiates SimpleTimer
lixianyu 0:d8f4c441e032 40
lixianyu 1:0e75de2a5d21 41 //updateTempHumi();
lixianyu 1:0e75de2a5d21 42 //updateLight();
lixianyu 1:0e75de2a5d21 43 //updateCH4();
lixianyu 0:d8f4c441e032 44
lixianyu 0:d8f4c441e032 45 ms = g_Timer.read_ms();
lixianyu 1:0e75de2a5d21 46 #if 1
lixianyu 0:d8f4c441e032 47 if (pm25_time > ms) pm25_time = ms;
lixianyu 0:d8f4c441e032 48 if (ms - pm25_time > INTERVAL_pm25) {
lixianyu 1:0e75de2a5d21 49 //sensorPM25 = PM25();
lixianyu 0:d8f4c441e032 50 pm25_time = ms; //更新计时器
lixianyu 0:d8f4c441e032 51 }
lixianyu 1:0e75de2a5d21 52 #endif
lixianyu 1:0e75de2a5d21 53 #if 0
lixianyu 1:0e75de2a5d21 54 adaf.clearDisplay();
lixianyu 1:0e75de2a5d21 55 adaf.drawRect(1, 1, 30,30, WHITE);
lixianyu 1:0e75de2a5d21 56 adaf.display();
lixianyu 1:0e75de2a5d21 57 #endif
lixianyu 1:0e75de2a5d21 58 //drawRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color);
lixianyu 1:0e75de2a5d21 59 //oled(u8glibhehe, sensor_tem, sensor_hum, sensor_light, sensorPM25, Sensor_etoh);
lixianyu 0:d8f4c441e032 60 oled(sensor_tem, sensor_hum, sensor_light, sensorPM25, Sensor_etoh);
lixianyu 1:0e75de2a5d21 61 wait(0.1);
lixianyu 1:0e75de2a5d21 62
lixianyu 0:d8f4c441e032 63 }
lixianyu 0:d8f4c441e032 64 }
lixianyu 1:0e75de2a5d21 65
lixianyu 1:0e75de2a5d21 66 /** Write to an I2C slave
lixianyu 1:0e75de2a5d21 67 *
lixianyu 1:0e75de2a5d21 68 * Performs a complete write transaction. The bottom bit of
lixianyu 1:0e75de2a5d21 69 * the address is forced to 0 to indicate a write.
lixianyu 1:0e75de2a5d21 70 *
lixianyu 1:0e75de2a5d21 71 * @param address 8-bit I2C slave address [ addr | 0 ]
lixianyu 1:0e75de2a5d21 72 * @param data Pointer to the byte-array data to send
lixianyu 1:0e75de2a5d21 73 * @param length Number of bytes to send
lixianyu 1:0e75de2a5d21 74 * @param repeated Repeated start, true - do not send stop at end
lixianyu 1:0e75de2a5d21 75 *
lixianyu 1:0e75de2a5d21 76 * @returns
lixianyu 1:0e75de2a5d21 77 * 0 on success (ack),
lixianyu 1:0e75de2a5d21 78 * non-0 on failure (nack)
lixianyu 1:0e75de2a5d21 79 */
lixianyu 1:0e75de2a5d21 80 int i2c_write1(int address, const char *data, int length)
lixianyu 1:0e75de2a5d21 81 {
lixianyu 1:0e75de2a5d21 82 //return g_i2c.write(address, data, length);
lixianyu 1:0e75de2a5d21 83 }
lixianyu 1:0e75de2a5d21 84
lixianyu 1:0e75de2a5d21 85 void log(char *s)
lixianyu 1:0e75de2a5d21 86 {
lixianyu 1:0e75de2a5d21 87 printf("%s\r\n", s);
lixianyu 1:0e75de2a5d21 88 }
lixianyu 1:0e75de2a5d21 89
lixianyu 1:0e75de2a5d21 90 void open_led(void)
lixianyu 1:0e75de2a5d21 91 {
lixianyu 1:0e75de2a5d21 92 //myled = 1;
lixianyu 1:0e75de2a5d21 93 }
lixianyu 1:0e75de2a5d21 94
lixianyu 1:0e75de2a5d21 95 void close_led(void)
lixianyu 1:0e75de2a5d21 96 {
lixianyu 1:0e75de2a5d21 97 //myled = 0;
lixianyu 1:0e75de2a5d21 98 }