Ruihao Li
This is a simplified version of home alarm system for CE323/CE860 (Advanced Embedded Systems Design) in the University of Essex.
Revision 0:df2226ca976c, committed 2017-02-17
- Comitter:
- liruihao2008
- Date:
- Fri Feb 17 17:13:43 2017 +0000
- Commit message:
- This is a simplified version for home alarm system in the University of Essex.
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD.lib Fri Feb 17 17:13:43 2017 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/simon/code/TextLCD/#308d188a2d3a
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Fri Feb 17 17:13:43 2017 +0000
@@ -0,0 +1,469 @@
+/*=============================================================================
+Copyright University of Essex 2017
+Author: Ruihao Li
+
+FILE - main.c
+ mbed LPC1768 application.
+
+DESCRIPTION
+ alarm 1 laboratory solution.
+ hardware: mbed LPC1768, an extension board.
+ Use a terminal program such as 'HyperTerminal' to communicate with the application.
+ The serial port configuration is shown below.
+ 9600 Baud
+ 8 data bits
+ No parity bits
+ One stop bit
+ No hardware flow control
+==============================================================================*/
+
+
+/******************************************************************************
+Include head files.
+******************************************************************************/
+#include "mbed.h"
+#include "TextLCD.h"
+
+// TextLCD
+TextLCD lcd(p15, p16, p17, p18, p19, p20);//, TextLCD::LCD20x4); // rs, e, d4-d7
+
+// Read from switches and keypad
+BusOut rows(p26,p25,p24);
+BusIn cols(p14,p13,p12,p11);
+
+// Control external LEDs
+SPI sw(p5, p6, p7);
+DigitalOut cs(p8);
+
+// Serial USB
+Serial pc(USBTX, USBRX); // tx, rx
+
+// Temperature reading
+I2C i2c(p9, p10); // I2C: SDA, SCL
+
+DigitalOut Sounder(LED1);
+DigitalOut led4(LED4);
+
+/******************************************************************************
+Declaration of functions.
+******************************************************************************/
+void alarmConfig(void);
+void alarm_state();
+
+int read_switch(void);
+int switchleds(void);
+void initleds();
+void setleds(int ledall);
+void setled(int ledno, int ledstate);
+int readled(int ledno);
+int readleds();
+
+char getKey();
+void setKey(void);
+int testCode(void);
+
+void sounder_blink();
+void pattern(void);
+void patternoff(void);
+void Sounderoff(void);
+
+void system_alarm(void);
+void system_set(void);
+
+/******************************************************************************
+Global variables.
+******************************************************************************/
+enum State {unset, exits, set, entry, alarm, report} state;
+char Keytable[] = { 'F', 'E', 'D', 'C',
+ '3', '6', '9', 'B',
+ '2', '5', '8', '0',
+ '1', '4', '7', 'A'
+ };
+char keyCode[] = {'1','2','3','4'};
+char code[4];
+int fail = 0; // number of failed attempts
+int success; // 0~4: number of successful matched keycodes; 5 indicates switch changing; 6 indicates time expired
+int zone;
+int led_bits = 0; // global LED status used for readback
+bool time_expired ;
+Ticker timer;
+Timeout t_alarm, t_entry, t_exit;
+
+/*=============================================================================
+
+FILE - main.cpp
+
+DESCRIPTION
+ Initiates the Finite State Machine
+=============================================================================*/
+int main() {
+ alarmConfig();
+
+ lcd.cls();
+ lcd.locate(2,0);
+ lcd.printf("Alarm Lab");
+ pc.printf("\n\n\r ALARM LAB\n\r (c)Copyright University of Essex 2017 \n\r Author: Ruihao Li\n\r");
+
+ setKey();
+ while (1){
+ switchleds();
+ alarm_state(); // FSM routine
+ }
+}
+
+/**********************************************************************************
+Finite State Machine for Alarm
+**********************************************************************************/
+void alarm_state(){
+ int s;
+
+ switch(state){
+ /*--------------------------------------------------------------------------------
+ UN_SET STATE (STATE 1)
+ un_set led enabled
+ Internal sounder disabledabled
+ Sensors not monitored.
+---------------------------------------------------------------------------------*/
+ case unset:
+ setled(8,3); // turn unset led on
+ pc.printf("\n\r Unset mode\n\r");
+ lcd.cls();
+ lcd.printf("Unset mode");
+
+ success = testCode();
+ if (success == 4) {
+ fail = 0; // failure counter reset
+ state = exits;
+ }
+ else if (fail == 2) {
+ pc.printf("\n\r attemp %d", fail+1);
+ state = alarm;
+ zone = 5; // zone identifier(5 represents an invalid code is entered three times)
+ fail = 0; //failure counter reset
+ }
+ else{
+ fail++;
+ state = unset;
+ pc.printf("\n\r attemp %d", fail);
+ }
+ break;
+/*--------------------------------------------------------------------------------
+ EXIT STATE (STATE 2)
+ un_set led flashes
+ Internal sounder enabled for 250msec every 500msec.
+---------------------------------------------------------------------------------*/
+ case exits:
+ setled(7,3); // turn exits led on
+ pattern(); // Sounder switches on and then off at 250ms intervals
+ pc.printf("\n\r Exit mode\n\r");
+ lcd.cls();
+ lcd.printf("Exit mode");
+
+ // you should program here!
+
+
+
+ break;
+ /*--------------------------------------------------------------------------------
+ SET STATE (STATE 3)
+ set led enabled
+ Internal sounder disabled.
+---------------------------------------------------------------------------------*/
+ case set:
+ setled(6,3); // turn set led on
+
+ pc.printf("\n\r Set mode\n\r");
+ lcd.cls();
+ lcd.printf("Set mode");
+
+
+ // you should program here!
+
+ break;
+/*--------------------------------------------------------------------------------
+ ENTRY STATE (STATE 4)
+ un_set led flashes
+ Internal sounder enabled for 250ms every 500ms.
+---------------------------------------------------------------------------------*/
+ case entry:
+ setled(5,3); // turn entry led on
+ pattern(); // Sounder switches on and then off at 250ms intervals
+
+ pc.printf("\n\r Entry mode\n\r");
+ lcd.cls();
+ lcd.printf("Entry mode");
+
+ // you should program here!
+
+ break;
+/*--------------------------------------------------------------------------------
+ ALARM STATE (STATE 5)
+ alarm led enabled
+ Internal and External sounders enabled.
+---------------------------------------------------------------------------------*/
+ case alarm:
+ setled(4,3); // turn entry led on
+ Sounder = 1; //Sounder enabled all the time during alarm state
+
+ pc.printf("\n\r Alarm mode\n\r");
+ lcd.cls();
+ lcd.printf("Alarm mode");
+
+ // you should program here!
+
+ break;
+/*--------------------------------------------------------------------------------
+ REPORT (STATE 6)
+ un-set and alarm leds enabled
+ Internal sounder remains enabled.
+ External sounder enabled.
+---------------------------------------------------------------------------------*/
+ case report:
+ setled(3,3); // turn entry led on
+
+ pc.printf("\n\r Report mode\n\r");
+ lcd.cls();
+ lcd.printf("Zone numbers:%i",zone);
+ lcd.locate(0,1);
+ lcd.printf("C key to clear");
+
+ while (1){
+ char b = getKey();
+ if (b == 'C'){
+ state = unset;
+ break;
+ }
+ }
+ break;
+ } // end switch(state)
+
+} // end alarm_state()
+
+
+/**********************************************************************************
+Configurations
+**********************************************************************************/
+void alarmConfig()
+{
+ cs=0;
+ sw.format(16,0);
+ sw.frequency(1000000);
+
+ state = unset; // Initial state
+
+ led_bits = 0x0000; // turn off all the external leds
+ sw.write(led_bits);
+ cs = 1;
+ cs = 0;
+}
+
+/**********************************************************************************
+External switches
+**********************************************************************************/
+int read_switch()
+{
+ rows = 4;
+ int switches = cols;
+ rows = 5;
+ switches = switches*16 + cols;
+
+ return switches;
+}
+
+int switchleds()
+{
+ int switches = read_switch();
+
+ for(int i=0;i<=7;i++){
+ if ((switches & 0x0001<<i)!=0){ // 1, then turn on
+ led_bits = led_bits | (0x0003 << i*2); }
+ else { // 0, then turn off
+ led_bits = led_bits & ((0x0003 << i*2) ^ 0xffff); }
+ }
+ sw.write(led_bits);
+ cs = 1;
+ cs = 0;
+
+ return switches;
+}
+
+/**********************************************************************************
+External LED functionality
+**********************************************************************************/
+void initleds() {
+ cs = 0; // latch must start low
+ sw.format(16,0); // SPI 16 bit data, low state, high going clock
+ sw.frequency(1000000); // 1MHz clock rate
+}
+
+void setleds(int ledall) {
+ led_bits = ledall; // update global LED status
+ sw.write((led_bits & 0x03ff) | ((led_bits & 0xa800) >> 1) | ((led_bits & 0x5400) << 1));
+ cs = 1; // latch pulse start
+ cs = 0; // latch pulse end
+}
+
+void setled(int ledno, int ledstate) {
+ ledno = 9 - ledno;
+ ledno = ((ledno - 1) & 0x0007) + 1; // limit led number
+ ledno = (8 - ledno) * 2; // offset of led state in 'led_bits'
+ ledstate = ledstate & 0x0003; // limit led state
+ ledstate = ledstate << ledno;
+ int statemask = ((0x0003 << ledno) ^ 0xffff); // mask used to clear led state
+ led_bits = ((led_bits & statemask) | ledstate); // clear and set led state
+ setleds(led_bits);
+}
+
+int readled(int ledno) {
+ ledno = 9 - ledno;
+ ledno = ((ledno - 1) & 0x0007) + 1; // limit led number
+ ledno = (8 - ledno) * 2; // offset of led state in 'led_bits'
+ int ledstate = led_bits;
+ ledstate = ledstate >> ledno; // shift selected led state into ls 2 bits
+ return (ledstate & 0x0003); // mask out and return led state
+}
+
+int readleds() {
+ return led_bits; // return LED status
+}
+
+/**********************************************************************************
+Keypad functionality
+**********************************************************************************/
+char getKey()
+{
+ int i,j;
+ char ch=' ';
+
+ for (i = 0; i <= 3; i++) {
+ rows = i;
+ for (j = 0; j <= 3; j++) {
+ if (((cols ^ 0x00FF) & (0x0001<<j)) != 0) {
+ ch = Keytable[(i * 4) + j];
+ }
+ }
+ }
+ wait(0.2); //debouncing
+ return ch;
+}
+
+int testCode(void)
+{
+ int a, y;
+ char b;
+
+ lcd.locate(0, 1);
+ lcd.printf("Enter Code: ____");
+ y = 0;
+ for(a = 0; a < 4; a++) {
+ b = getKey();
+ switch(b) {
+ case ' ':
+ a--;
+ break;
+ case 'C': // use 'C' to delete input
+ if (a > 0){
+ a = a-2;
+ lcd.locate(13+a, 1);
+ lcd.putc('_');
+ if ( code[a+1] == keyCode[a+1]){
+ y--;
+ }
+ }
+ else if (a == 0){
+ a--;
+ }
+ break;
+ default:
+ code[a] = b;
+ lcd.locate(12+a, 1);
+ lcd.putc('*');
+ if(code[a] == keyCode[a]) {
+ y++;
+ }
+ }
+ }
+ lcd.cls();
+ lcd.locate(0,1);
+ lcd.printf("Press B to set");
+ while (1){
+ b = getKey();
+ if (b == 'B')
+ break;
+ }
+
+ return(y);
+}
+
+void setKey(void)
+{
+ int a;
+ char b;
+
+ lcd.locate(0, 1);
+ lcd.printf("Init Code: ____");
+ for(a = 0; a < 4; a++) {
+ b = getKey();
+
+ switch(b){
+ case ' ':
+ a--;
+ break;
+ case 'C':
+ if (a > 0){
+ a = a-2;
+ lcd.locate(13+a, 1);
+ lcd.putc('_');
+ }
+ else if (a == 0){
+ a--;
+ }
+ break;
+ default:
+ lcd.locate(12+a, 1);
+ lcd.putc(b);
+ keyCode[a] = b;
+ }
+ }
+ wait(1);
+}
+
+/**********************************************************************************
+Simulation of alarm internal sounder
+**********************************************************************************/
+void sounder_blink()
+{
+ Sounder = !Sounder;
+}
+
+void pattern(void)
+{
+ timer.attach(&sounder_blink, 0.25);
+}
+
+void patternoff(void)
+{
+ timer.detach(); // turn the Sounder off
+ Sounder = 0;
+}
+
+void Sounderoff(void)
+{
+ Sounder = 0;
+}
+
+/**********************************************************************************
+Set system state
+**********************************************************************************/
+void system_alarm(void)
+{
+ state = alarm;
+ time_expired = true;
+}
+
+void system_set(void)
+{
+ state = set;
+ time_expired = true;
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Fri Feb 17 17:13:43 2017 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/ef9c61f8c49f \ No newline at end of file