File content as of revision 15:eb8aac252eba:

/* Copyright (c) 2010-2011 mbed.org, MIT License
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
* and associated documentation files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

#ifndef MMA8451Q_H
#define MMA8451Q_H

#include "mbed.h"

/**
* MMA8451Q accelerometer example
*
* @code
* #include "mbed.h"
* #include "MMA8451Q.h"
* 
* #define MMA8451_I2C_ADDRESS (0x1d<<1)
* 
* int main(void) {
* 
* MMA8451Q acc(P_E25, P_E24, MMA8451_I2C_ADDRESS);
* PwmOut rled(LED_RED);
* PwmOut gled(LED_GREEN);
* PwmOut bled(LED_BLUE);
* 
*     while (true) {       
*         rled = 1.0 - abs(acc.getAccX());
*         gled = 1.0 - abs(acc.getAccY());
*         bled = 1.0 - abs(acc.getAccZ());
*         wait(0.1);
*     }
* }
* @endcode
*/
class MMA8451Q
{
public:
  /**
  * MMA8451Q constructor
  *
  * @param sda SDA pin
  * @param sdl SCL pin
  * @param addr addr of the I2C peripheral
  */
  MMA8451Q(PinName sda, PinName scl, int addr);

  /**
  * MMA8451Q destructor
  */
  ~MMA8451Q();
  
  /**
  *  Reset the accelerometer hardware and set our initial parameters
  */
  void init();

  /**
   * Enter standby mode
   */
  void standby();
  
  /**
   * Enter active mode
   */
  void active();
  
  /**
   * Get the value of the WHO_AM_I register
   *
   * @returns WHO_AM_I value
   */
  uint8_t getWhoAmI();

  /**
   * Get X axis acceleration
   *
   * @returns X axis acceleration
   */
  float getAccX();

  /**
   * Get Y axis acceleration
   *
   * @returns Y axis acceleration
   */
  float getAccY();
  
  /**
   *  Read an X,Y pair
   */
  void getAccXY(float &x, float &y);
  
  /**
   *  Read X,Y,Z.  This is the most efficient way to fetch
   *  all of the axes at once, since it fetches all three
   *  in a single I2C transaction.
   */
  void getAccXYZ(float &x, float &y, float &z);

  /**
   * Get Z axis acceleration
   *
   * @returns Z axis acceleration
   */
  float getAccZ();

  /**
   * Get XYZ axis acceleration
   *
   * @param res array where acceleration data will be stored
   */
  void getAccAllAxis(float * res);
  
  /**
   * Set interrupt mode.  'pin' is 1 for INT1_ACCEL (PTA14) and 2 for INT2_ACCEL (PTA15).
   * The caller is responsible for setting up an interrupt handler on the corresponding
   * PTAxx pin.
   */
  void setInterruptMode(int pin);

private:
  I2C m_i2c;
  int m_addr;
  void readRegs(int addr, uint8_t * data, int len);
  void writeRegs(uint8_t * data, int len);
  int16_t getAccAxis(uint8_t addr);

};

#endif