encoder and tachometer class for EW3XX single board computer
EW305sbc.h
- Committer:
- lddevrie
- Date:
- 2019-09-17
- Revision:
- 3:b05d231c9549
- Parent:
- 2:6cf351721d86
- Child:
- 5:58b13292286e
File content as of revision 3:b05d231c9549:
/* C Library for the WRC-305-SBC J Bradshaw L DeVries 20140912 20140918 J Bradshaw - Found CS mistake in Encoder routines Added comments in Init function, encoder functions 20150210 J Bradshaw - Initialized DigitalOuts with pre-defined logic levels (CS's high, etc) 20161011 J Bradshaw - Changed MAX1270 ADC SCLK to 5MHz and format(12, 0) for conversion mode to match datasheet (200ns SCLK max PW high and low) 20190814 L DeVries - revised mbedWSEsbc to create EW305-specific library */ #ifndef TACH_H #define TACH_H /** * Includes */ #include "mbed.h" // LS7366 ENCODER IC DEFINITIONS //============================================================================= // Four commands for the Instruction Register (B7,B6) - LS7366 //============================================================================= #define CLR 0x00 //Clear Instruction #define RD 0x01 //Read Instruction #define WR 0x02 //Write Instruction #define LOAD 0x03 //Load Instruction //============================================================================= // Register to Select from the Instruction Register (B5,B4,B3) - LS7366 //============================================================================= #define NONE 0x00 //No Register Selected #define MDR0 0x01 //Mode Register 0 #define MDR1 0x02 //Mode Register 1 #define DTR 0x03 //Data Transfer Register #define CNTR 0x04 //Software Configurable Counter Register #define OTR 0x05 //Output Transfer Register #define STR 0x06 //Status Register #define NONE_REG 0x07 //No Register Selected /** * Tach Interface. */ class EW305sbc { public: /** * Constructor. * * Tracks encoder position and speed, provides * rotations per second (Hz) output * * @param Channel input channel from SPI chip. * @param pulsesPerRev Number of pulses in one revolution (quadrature encoder). */ EW305sbc(int ch, int pulsesPerRev); /** * Read the speed of the motor shaft */ float getSpeed(void); /** * Read the speed of the motor shaft */ int getCount(void); /** * Read angle of the motor shaft */ float getAngle(void); /** * Read the state of the motor shaft */ long LS7366_read_counter(int chan_num); /** * Read the state of the motor shaft, quadrature?? */ void LS7366_quad_mode_x4(int chan_num); /** * Reset the encoder counts */ void LS7366_reset_counter(int chan_num); private: // Set-up hardwired IO Ticker updater; int ch_; int pulsesPerRev_; //SPI spi_max1270(PinName p5,PinName p6,PinName p7); SPI spi;//(PinName p5,PinName p6,PinName p7); DigitalOut ls7166_cs1;//(PinName p19,int tmp=1); //CS for LS7366-1 (U8) DigitalOut ls7166_cs2;//(PinName p20, int tmp=1); //CS for LS7366-2 (U9) long count_; float speed_; float angle_; long countp_; int dt_; /** * internal encoder cmd */ void LS7366_cmd(int inst, int reg); /** * write to DTR pin? */ void LS7366_write_DTR(int chan_num,long enc_value); /** * initialization */ void init(); /** * update current speed estimate */ void recalc(void); }; #endif /* TACH_H */