seeedstudio ARCH GPRS Test for GPRS function
Fork of ARCH_GPRS_Demo by
ARCH GPRS Introduction
- Arch GPRS is a wireless network module based on EG-10, it can achive remote data colletion function to communicate with outside world by GPRS network.
- Arch GPRS has standard Arduino interface and Grove connectors. It’s convenient to connect existing Shields and Grove products to Arch GPRS.
- You can use the solar panel to charge for battery, and own to its low-power design, so Arch GPRS can work normally in outdoor.
- For more information, please visit http://www.seeedstudio.com/depot/arch-gprs-p-1657.html?cPath=6_11
main.cpp
/* main.cpp 2013 Copyright (c) Seeed Technology Inc. All right reserved. Author:lawliet zou(lawliet.zou@gmail.com) 2013-7-21 This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include "mbed.h" #include "string.h" #include "gprs.h" #define SEND_SMS_TEST 0 #define CALL_UP_TEST 0 #define ANSWER_TEST 0 #define READ_SMS_TEST 0 #define PHONE_NUMBER "150****9566" #define PINPWR P1_2 // power on EG 10, low enable #define PINONOFF P1_7 // switch of EG10, low enable, low for 2s to turn on EG10 DigitalOut eg10_pwr(PINPWR); DigitalOut eg10_on(PINONOFF); GPRS gprsTest(P0_19, P0_18, 115200, PHONE_NUMBER); void EG10_PowerUp(void) { eg10_pwr = 1; eg10_on = 1; wait(2); eg10_pwr = 0; eg10_on = 0; wait(2); eg10_on = 1; wait(2); } int main(void) { EG10_PowerUp(); while(0 != gprsTest.init()) { wait(2); } #if CALL_UP_TEST gprsTest.callUp(PHONE_NUMBER); #endif #if SEND_SMS_TEST gprsTest.sendSMS(PHONE_NUMBER,"hello,lawliet"); #endif #if ANSWER_TEST || READ_SMS_TEST while(1) { int messageType = gprsTest.loopHandle(); if(MESSAGE_RING == messageType) { gprsTest.answer(); } else if(MESSAGE_SMS == messageType) { char smsMessage[SMS_MAX_LENGTH]; gprsTest.getSMS(smsMessage); } } #endif return 0; }
TCP_YEELINK/tcp_yeelink.h
- Committer:
- loovee
- Date:
- 2013-08-23
- Revision:
- 0:6d297fe482af
File content as of revision 0:6d297fe482af:
/* IOT_Mbed.h 2013 Copyright (c) Seeed Technology Inc. All right reserved. Author:Loovee 2013-7-21 This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef __TCP_YEELINK_H__ #define __TCP_YEELINK_H__ #include "mbed.h" class IOT_Mbed{ private: //Serial serial1(P0_19, P0_18); // tx, rx private: char yeelinkPostURL[100]; char yeelinkPostHeads[100]; char yeelinkDns[20]; char yeelinkPort[10]; private: void callTest(); int sendCmdAndWaitForRest(char *dta, const char *resq, int timeout); void sendCmd(char *dta); int parseURL(const char *url, char *host, int max_host_len, unsigned int *port, char *path, int max_path_len); public: int waitString(const char *str, int timeout); void init(char *postURL, char *APIKey); int checkAT(int timeout); int connectTCP(); int connectTCP(char *ip, char *port); void postDtaToYeelink(); int postDtaToYeelink(char *url, char *apikey, int sensorDta); int postDtaToYeelink(char *url, char *apikey, float sensorDta, int dec); int sendDtaTcp(char *dta, int timeout); bool sendToYeelink_t(); }; extern IOT_Mbed IOT; #endif /********************************************************************************************************* END FILE *********************************************************************************************************/