seeedstudio ARCH GPRS Test for GPRS function
Fork of ARCH_GPRS_Demo by
ARCH GPRS Introduction
- Arch GPRS is a wireless network module based on EG-10, it can achive remote data colletion function to communicate with outside world by GPRS network.
- Arch GPRS has standard Arduino interface and Grove connectors. It’s convenient to connect existing Shields and Grove products to Arch GPRS.
- You can use the solar panel to charge for battery, and own to its low-power design, so Arch GPRS can work normally in outdoor.
- For more information, please visit http://www.seeedstudio.com/depot/arch-gprs-p-1657.html?cPath=6_11
main.cpp
/* main.cpp 2013 Copyright (c) Seeed Technology Inc. All right reserved. Author:lawliet zou(lawliet.zou@gmail.com) 2013-7-21 This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include "mbed.h" #include "string.h" #include "gprs.h" #define SEND_SMS_TEST 0 #define CALL_UP_TEST 0 #define ANSWER_TEST 0 #define READ_SMS_TEST 0 #define PHONE_NUMBER "150****9566" #define PINPWR P1_2 // power on EG 10, low enable #define PINONOFF P1_7 // switch of EG10, low enable, low for 2s to turn on EG10 DigitalOut eg10_pwr(PINPWR); DigitalOut eg10_on(PINONOFF); GPRS gprsTest(P0_19, P0_18, 115200, PHONE_NUMBER); void EG10_PowerUp(void) { eg10_pwr = 1; eg10_on = 1; wait(2); eg10_pwr = 0; eg10_on = 0; wait(2); eg10_on = 1; wait(2); } int main(void) { EG10_PowerUp(); while(0 != gprsTest.init()) { wait(2); } #if CALL_UP_TEST gprsTest.callUp(PHONE_NUMBER); #endif #if SEND_SMS_TEST gprsTest.sendSMS(PHONE_NUMBER,"hello,lawliet"); #endif #if ANSWER_TEST || READ_SMS_TEST while(1) { int messageType = gprsTest.loopHandle(); if(MESSAGE_RING == messageType) { gprsTest.answer(); } else if(MESSAGE_SMS == messageType) { char smsMessage[SMS_MAX_LENGTH]; gprsTest.getSMS(smsMessage); } } #endif return 0; }
Diff: ARCH_GPRS_HW/ARCH_GPRS_HW.cpp
- Revision:
- 0:6d297fe482af
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/ARCH_GPRS_HW/ARCH_GPRS_HW.cpp Fri Aug 23 02:31:06 2013 +0000 @@ -0,0 +1,139 @@ +/* + IOT_hw.cpp + 2013 Copyright (c) Seeed Technology Inc. All right reserved. + + Author:Loovee + 2013-7-21 + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "mbed.h" +#include "tcp_yeelink.h" +#include "tcp_yeelink_dfs.h" +#include "ARCH_GPRS_HW.h" +#include "ARCH_GPRS_HW_DFS.h" + +DigitalOut eg10_pwr(PINPWR); +DigitalOut eg10_on(PINONOFF); +DigitalInOut eg10_state(PINEGSTATE); +DigitalOut eg10_rst(PINSYSRST); + +DigitalOut led1(PINLED1); +DigitalOut led2(PINLED2); +DigitalOut led3(PINLED3); +DigitalOut led4(PINLED4); + +DigitalOut grove_pwr(GROVE_PWR); +DigitalIn charging(PIN_CHRGING); +DigitalIn chargdone(PIN_CHRGDONE); + +AnalogIn vol_bat(PIN_READBAT); + +void IOT_HW::EG10_PWRON() +{ + eg10_pwr = 0; +} + +void IOT_HW::EG10_PWROFF() +{ + eg10_pwr = 1; +} + +void IOT_HW::EG10_ON() +{ + eg10_on = 0; + wait(2); + eg10_on = 1; +} + +int IOT_HW::init() +{ + init_io(); + EG10_PWROFF(); + wait(2); // wait 2s + EG10_PWRON(); + EG10_PWRON(); + EG10_ON(); + return (IOT.waitString("M2MRSSI", 30)); +} + +void IOT_HW::init_io() +{ + eg10_pwr = 1; + eg10_on = 1; +} + +int IOT_HW::getEG10_State() +{ + eg10_state.input(); + eg10_state.mode(PullDown); + if(eg10_state.read()) + { + return 1; + } + return 0; +} + +void IOT_HW::EG10StateLed(unsigned char state) +{ + eg10_state.output(); + eg10_state = 1-state; +} + +void IOT_HW::userLed(unsigned char led, unsigned char state) +{ + // if(state!=0 || state!=1)return; + + if(1==led)led1 = state; + else if(2==led)led2 = state; + else if(3==led)led3 = state; + else if(4==led)led4 = state; + +} + +int IOT_HW::readChrgState() +{ + if(!charging.read())return CHRGDONE; + if(!chargdone.read())return CHRGING; + return NOCHRG; +} + +float IOT_HW::readBatVol() +{ + unsigned int tmp = vol_bat.read_u16(); + + return tmp; + float dr = tmp; + dr = dr/65536.0*3.3*2.0; + return dr; + // return ((float tmp)/65536.0*3.3*2.0); +} + +void IOT_HW::grovePwrOn() +{ + grove_pwr = 0; +} + +void IOT_HW::grovePwrOff() +{ + grove_pwr = 1; +} + + +IOT_HW iot_hw; +/********************************************************************************************************* + END FILE +*********************************************************************************************************/ \ No newline at end of file