mbed library sources

Fork of mbed-src by mbed official

Revision:
223:d98d59aec21a
Parent:
222:96162ccfbf43
diff -r 96162ccfbf43 -r d98d59aec21a targets/hal/TARGET_STM/TARGET_STM32F3XX/PinNames.h
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/PinNames.h	Fri Jun 06 11:00:08 2014 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,180 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// MODE (see GPIOMode_TypeDef structure)
-// OTYPE (see GPIOOType_TypeDef structure)
-// PUPD (see GPIOPuPd_TypeDef structure)
-// AFNUM (see AF_mapping constant table, 0xFF is not used)
-#define STM_PIN_DATA(MODE, OTYPE, PUPD, AFNUM)  (((AFNUM)<<8)|((PUPD)<<4)|((OTYPE)<<2)|((MODE)<<0))
-#define STM_PIN_MODE(X)   (((X)>>0) & 0x3)
-#define STM_PIN_OTYPE(X)  (((X)>>2) & 0x1)
-#define STM_PIN_PUPD(X)   (((X)>>4) & 0x3)
-#define STM_PIN_AFNUM(X)  (((X)>>8) & 0xF)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble  = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X)  ((uint32_t)(X) & 0xF)
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
-    PA_0  = 0x00,
-    PA_1  = 0x01,
-    PA_2  = 0x02,
-    PA_3  = 0x03,
-    PA_4  = 0x04,
-    PA_5  = 0x05,
-    PA_6  = 0x06,
-    PA_7  = 0x07,
-    PA_8  = 0x08,
-    PA_9  = 0x09,
-    PA_10 = 0x0A,
-    PA_11 = 0x0B,
-    PA_12 = 0x0C,
-    PA_13 = 0x0D,
-    PA_14 = 0x0E,
-    PA_15 = 0x0F,
-
-    PB_0  = 0x10,
-    PB_1  = 0x11,
-    PB_2  = 0x12,
-    PB_3  = 0x13,
-    PB_4  = 0x14,
-    PB_5  = 0x15,
-    PB_6  = 0x16,
-    PB_7  = 0x17,
-    PB_8  = 0x18,
-    PB_9  = 0x19,
-    PB_10 = 0x1A,
-    PB_11 = 0x1B,
-    PB_12 = 0x1C,
-    PB_13 = 0x1D,
-    PB_14 = 0x1E,
-    PB_15 = 0x1F,
-
-    PC_0  = 0x20,
-    PC_1  = 0x21,
-    PC_2  = 0x22,
-    PC_3  = 0x23,
-    PC_4  = 0x24,
-    PC_5  = 0x25,
-    PC_6  = 0x26,
-    PC_7  = 0x27,
-    PC_8  = 0x28,
-    PC_9  = 0x29,
-    PC_10 = 0x2A,
-    PC_11 = 0x2B,
-    PC_12 = 0x2C,
-    PC_13 = 0x2D,
-    PC_14 = 0x2E,
-    PC_15 = 0x2F,
-
-    PD_0  = 0x30,
-    PD_1  = 0x31,
-    PD_2  = 0x32,
-    PD_3  = 0x33,
-    PD_4  = 0x34,
-    PD_5  = 0x35,
-    PD_6  = 0x36,
-    PD_7  = 0x37,
-    PD_8  = 0x38,
-    PD_9  = 0x39,
-    PD_10 = 0x3A,
-    PD_11 = 0x3B,
-    PD_12 = 0x3C,
-    PD_13 = 0x3D,
-    PD_14 = 0x3E,
-    PD_15 = 0x3F,
-
-    PE_0  = 0x40,
-    PE_1  = 0x41,
-    PE_2  = 0x42,
-    PE_3  = 0x43,
-    PE_4  = 0x44,
-    PE_5  = 0x45,
-    PE_6  = 0x46,
-    PE_7  = 0x47,
-    PE_8  = 0x48,
-    PE_9  = 0x49,
-    PE_10 = 0x4A,
-    PE_11 = 0x4B,
-    PE_12 = 0x4C,
-    PE_13 = 0x4D,
-    PE_14 = 0x4E,
-    PE_15 = 0x4F,
-
-    PF_0  = 0x50,
-    PF_1  = 0x51,
-    PF_2  = 0x52,
-    PF_3  = 0x53,
-    PF_4  = 0x54,
-    PF_5  = 0x55,
-    PF_6  = 0x56,
-    PF_7  = 0x57,
-    PF_8  = 0x58,
-    PF_9  = 0x59,
-    PF_10 = 0x5A,
-    PF_11 = 0x5B,
-    PF_12 = 0x5C,
-    PF_13 = 0x5D,
-    PF_14 = 0x5E,
-    PF_15 = 0x5F,
-
-    LED1  = PE_9,
-
-    // Not connected
-    NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
-    PullNone  = 0,
-    PullUp    = 1,
-    PullDown  = 2,
-    OpenDrain = 3,
-    PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif