Diff: Eeabp1.h

Revision:

0:c6b2a8ace823

Child:

2:d48fcae8b5bd

diff -r 000000000000 -r c6b2a8ace823 Eeabp1.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Eeabp1.h	Sat Aug 26 08:58:38 2017 +0000
@@ -0,0 +1,106 @@
+#if !defined(EEAPP1_H)
+#define EEAPP1_H
+#include "mbed.h"
+#include "types.h"
+#include "Sht31.h"
+#include "ADXL345_I2C.h"
+
+typedef enum {
+    LED_OFF,
+    LED_ON,
+    LED_BLINK_FAST,
+    LED_BLINK_MID,
+    LED_BLINK_SLOW,
+}EeabLedState;
+
+typedef enum {
+    GROVE_CH1,
+    GROVE_CH2,
+}EeabGrovePort;
+
+typedef enum {
+    GROVE_SIG1,
+    GROVE_SIG2,
+}EeabGroveSig;
+
+typedef enum {
+    GROVE_DIO,
+    GROVE_ANALOG,
+}EeabGrovePortType;
+
+typedef enum {
+    GROVE_DIO_OUT,
+    GROVE_DIO_IN,
+}EeabGroveDioDirection;
+
+typedef enum {
+    GROVE_DIO_LOW = 0,
+    GROVE_DIO_HIGH = 1,
+}EeabGroveDio;
+
+class Eeabp1
+{
+public:
+    Eeabp1();
+    int setLedState(EeabLedState state);
+    void loop(void);
+    int debug(const char * format, ...);
+    int setLoRaPower(bool on);
+    int sendLoRaString(const char * format, ...);
+    int sendLoRaBinary(const char *payload, size_t len);
+    void setGrovePower(bool on);
+    int setGrovePortType(EeabGrovePort port, EeabGrovePortType type);
+    int setGroveDioDirection(EeabGrovePort port, EeabGroveDioDirection dir, Callback<void()> func = NULL);
+    int setGroveDio(EeabGrovePort port, EeabGroveDio val);
+    int setGroveDio(EeabGrovePort port, EeabGroveSig sig , EeabGroveDio val);
+    int getGroveDio(EeabGrovePort port, EeabGroveSig sig);
+    float getGroveAnalog(EeabGrovePort port, EeabGroveSig sig);
+    int enableTempHumidSensor(void);
+    float getTemp(void);
+    float getHumid(void);
+    int enableAccelerometer(void);
+    int getAcc(int *x, int *y, int *z);
+
+private:
+    DigitalOut pwr_en;
+    /* state LED */
+    DigitalOut led;
+    EeabLedState led_state;
+    /* LoRa */
+    RawSerial *serial;
+    DigitalOut lora_power;
+    DigitalOut lora_reset;
+    bool lora_enabled;
+    /* Grove */
+    DigitalOut grove_power;
+    bool grove_enabled;
+    DigitalOut grv_sel2a;
+    DigitalOut grv_sel2g;
+    DigitalOut grv_sel1a;
+    DigitalOut grv_sel1g;
+    
+    DigitalOut *grv_p1s1do; //Port1, Signal1, Digital Out // GP2
+    DigitalOut *grv_p1s2do; //Port1, Signal2, Digital Out // GP1
+    InterruptIn *grv_p1s1di; //Port1, Signal1, Digital In // GP2
+    InterruptIn *grv_p1s2di; //Port1, Signal1, Digital In // GP2
+    AnalogIn grv_p1s1a; //Port1, Signal1, Analog In // AN2
+    AnalogIn grv_p1s2a; //Port1, Signal2, Analog In // AN2
+
+    DigitalOut *grv_p2s1do; //Port2, Signal1, Digital Out // GP4
+    DigitalOut *grv_p2s2do; //Port2, Signal2, Digital Out // GP3
+    InterruptIn *grv_p2s1di; //Port2, Signal1, Digital In // GP4
+    InterruptIn *grv_p2s2di; //Port2, Signal2, Digital In // GP3
+    AnalogIn grv_p2s1a; //Port2, Signal1, Analog In // AN4
+    AnalogIn grv_p2s2a; //Port2, Signal2, Analog In // AN3
+
+    Sht31 *temp_humid_sensor;
+    ADXL345_I2C *accelerometer;
+
+    void flushSerial();
+    int chkSerialChar(const char,uint16_t);
+    int waitSerialChar(const char,uint16_t);
+    int chkSerialCharOk();
+    int chkSerialCharRes(char);
+};
+
+#endif /* !defined(EEAPP1_H) */