Takumi Odashima / ArduinoUsbHostShield

Library to use Arduino USB host shield on mbed

Dependents:   USBHOST_PS5

ArduinoのUSB Host Shield 2.0をmbedで使えるようにしたライブラリです。
大体のコードがArduinoからそのまま移植可能です。

Arduino UNOやMega用のホストシールド以外にもミニサイズのホストシールドでも使用可能です https://os.mbed.com/media/uploads/kotakku/dffgfddswa.png

シールドについて

3.3VのI/O用にシールドの改造が必要になりますがネット上に記事がたくさんあるのでそちらを参考にしてください

接続例

https://os.mbed.com/media/uploads/kotakku/esgsvfvhjrekldkcjxvb.png

使い方

Arduinoのコードと違うのはUSBのインスタンスの宣言部分のみです。
ピンを自分で指定できるようにしたので使いやすくなりました。

仕様

  • Arduinoのmillis関数、micros関数の移植のために内部でTimerクラスを使用しています。

main.cpp

#include "mbed.h"
#include <PS3BT.h>
#include <usbhub.h>

Serial pc(USBTX, USBRX, 115200);

//Nucleo f303k8用
USB Usb(A6, A5, A4, A3, A2); // mosi, miso, sclk, ssel, intr
BTD Btd(&Usb);
PS3BT PS3(&Btd);

int main()
{
    bool printAngle = false;

    if (Usb.Init() == -1)
    {
        pc.printf("\r\nOSC did not start");
        while (1); // Halt
    }
    pc.printf("\r\nPS3 USB Library Started");

    while (1)
    {
        Usb.Task();
        
        if (PS3.PS3Connected || PS3.PS3NavigationConnected) {
            if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117)
            {
                pc.printf("\r\nLeftHatX: %d", PS3.getAnalogHat(LeftHatX));
                pc.printf("\tLeftHatY: %d", PS3.getAnalogHat(LeftHatY));
                if (PS3.PS3Connected)
                { // The Navigation controller only have one joystick
                    pc.printf("\tRightHatX: %d", PS3.getAnalogHat(RightHatX));
                    pc.printf("\tRightHatY: %d", PS3.getAnalogHat(RightHatY));
                }
            }
            // Analog button values can be read from almost all buttons
            if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2))
            {
                pc.printf("\r\nL2: %d", PS3.getAnalogButton(L2));
                if (!PS3.PS3NavigationConnected)
                {
                    pc.printf("\tR2: %d", PS3.getAnalogButton(R2));
                }
            }
            if (PS3.getButtonClick(PS))
            {
                PS3.disconnect();
                pc.printf("\r\nPS");
            }
    
            if (PS3.getButtonClick(TRIANGLE))
                pc.printf("\r\nTriangle");
            if (PS3.getButtonClick(CIRCLE))
                pc.printf("\r\nCircle");
            if (PS3.getButtonClick(CROSS))
                pc.printf("\r\nCross");
            if (PS3.getButtonClick(SQUARE))
                pc.printf("\r\nSquare");
    
            if (PS3.getButtonClick(UP))
            {
                pc.printf("\r\nUp");
                PS3.setLedOff();
                PS3.setLedOn(CONTROLLER_LED4);
            }
            if (PS3.getButtonClick(RIGHT))
            {
                pc.printf("\r\nRight");
                PS3.setLedOff();
                PS3.setLedOn(CONTROLLER_LED1);
            }
            if (PS3.getButtonClick(DOWN))
            {
                pc.printf("\r\nDown");
                PS3.setLedOff();
                PS3.setLedOn(CONTROLLER_LED2);
            }
            if (PS3.getButtonClick(LEFT))
            {
                pc.printf("\r\nLeft");
                PS3.setLedOff();
                PS3.setLedOn(CONTROLLER_LED3);
            }
    
            if (PS3.getButtonClick(L1))
                pc.printf("\r\nL1");
            if (PS3.getButtonClick(L3))
                pc.printf("\r\nL3");
            if (PS3.getButtonClick(R1))
                pc.printf("\r\nR1");
            if (PS3.getButtonClick(R3))
                pc.printf("\r\nR3");
    
            if (PS3.getButtonClick(SELECT))
            {
                pc.printf("\r\nSelect - ");
                PS3.printStatusString();
            }
            if (PS3.getButtonClick(START))
            {
                pc.printf("\r\nStart");
                printAngle = !printAngle;
            }
            if (printAngle)
            {
                pc.printf("\r\nPitch: %.3lf", PS3.getAngle(Pitch));
                pc.printf("\tRoll: %.3lf", PS3.getAngle(Roll));
            }
        }
        else
        {
            pc.printf("not connect\n");
        }
    }
}

USB_Host/UHS2_gpio.h

Committer:
robo_ichinoseki_a
Date:
2020-05-02
Revision:
1:da31140f2a1c
Parent:
0:b1ce54272580

File content as of revision 1:da31140f2a1c:

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

Contact information
-------------------

Circuits At Home, LTD
Web      :  http://www.circuitsathome.com
e-mail   :  support@circuitsathome.com

UHS2_GPIO implements "wiring" style GPIO access. Implemented by Brian Walton brian@riban.co.uk
 */

#if !defined(__USB2_GPIO_H__)
#define __USB2_GPIO_H__

#include "Usb.h"

class UHS2_GPIO {
public:
        UHS2_GPIO(USB *pUsb);

        void digitalWrite(uint8_t pin, uint8_t val);
        int digitalRead(uint8_t pin);
        int digitalReadOutput(uint8_t pin);

private:
        USB* m_pUsb;
};

#endif // __USB2_GPIO_H__