Library to use Arduino USB host shield on mbed
ArduinoのUSB Host Shield 2.0をmbedで使えるようにしたライブラリです。
大体のコードがArduinoからそのまま移植可能です。
Arduino UNOやMega用のホストシールド以外にもミニサイズのホストシールドでも使用可能です
シールドについて
3.3VのI/O用にシールドの改造が必要になりますがネット上に記事がたくさんあるのでそちらを参考にしてください
接続例
使い方
Arduinoのコードと違うのはUSBのインスタンスの宣言部分のみです。
ピンを自分で指定できるようにしたので使いやすくなりました。
仕様
- Arduinoのmillis関数、micros関数の移植のために内部でTimerクラスを使用しています。
main.cpp
#include "mbed.h" #include <PS3BT.h> #include <usbhub.h> Serial pc(USBTX, USBRX, 115200); //Nucleo f303k8用 USB Usb(A6, A5, A4, A3, A2); // mosi, miso, sclk, ssel, intr BTD Btd(&Usb); PS3BT PS3(&Btd); int main() { bool printAngle = false; if (Usb.Init() == -1) { pc.printf("\r\nOSC did not start"); while (1); // Halt } pc.printf("\r\nPS3 USB Library Started"); while (1) { Usb.Task(); if (PS3.PS3Connected || PS3.PS3NavigationConnected) { if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) { pc.printf("\r\nLeftHatX: %d", PS3.getAnalogHat(LeftHatX)); pc.printf("\tLeftHatY: %d", PS3.getAnalogHat(LeftHatY)); if (PS3.PS3Connected) { // The Navigation controller only have one joystick pc.printf("\tRightHatX: %d", PS3.getAnalogHat(RightHatX)); pc.printf("\tRightHatY: %d", PS3.getAnalogHat(RightHatY)); } } // Analog button values can be read from almost all buttons if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) { pc.printf("\r\nL2: %d", PS3.getAnalogButton(L2)); if (!PS3.PS3NavigationConnected) { pc.printf("\tR2: %d", PS3.getAnalogButton(R2)); } } if (PS3.getButtonClick(PS)) { PS3.disconnect(); pc.printf("\r\nPS"); } if (PS3.getButtonClick(TRIANGLE)) pc.printf("\r\nTriangle"); if (PS3.getButtonClick(CIRCLE)) pc.printf("\r\nCircle"); if (PS3.getButtonClick(CROSS)) pc.printf("\r\nCross"); if (PS3.getButtonClick(SQUARE)) pc.printf("\r\nSquare"); if (PS3.getButtonClick(UP)) { pc.printf("\r\nUp"); PS3.setLedOff(); PS3.setLedOn(CONTROLLER_LED4); } if (PS3.getButtonClick(RIGHT)) { pc.printf("\r\nRight"); PS3.setLedOff(); PS3.setLedOn(CONTROLLER_LED1); } if (PS3.getButtonClick(DOWN)) { pc.printf("\r\nDown"); PS3.setLedOff(); PS3.setLedOn(CONTROLLER_LED2); } if (PS3.getButtonClick(LEFT)) { pc.printf("\r\nLeft"); PS3.setLedOff(); PS3.setLedOn(CONTROLLER_LED3); } if (PS3.getButtonClick(L1)) pc.printf("\r\nL1"); if (PS3.getButtonClick(L3)) pc.printf("\r\nL3"); if (PS3.getButtonClick(R1)) pc.printf("\r\nR1"); if (PS3.getButtonClick(R3)) pc.printf("\r\nR3"); if (PS3.getButtonClick(SELECT)) { pc.printf("\r\nSelect - "); PS3.printStatusString(); } if (PS3.getButtonClick(START)) { pc.printf("\r\nStart"); printAngle = !printAngle; } if (printAngle) { pc.printf("\r\nPitch: %.3lf", PS3.getAngle(Pitch)); pc.printf("\tRoll: %.3lf", PS3.getAngle(Roll)); } } else { pc.printf("not connect\n"); } } }
USB_Host/message.cpp@1:da31140f2a1c, 2020-05-02 (annotated)
- Committer:
- robo_ichinoseki_a
- Date:
- Sat May 02 05:56:48 2020 +0000
- Revision:
- 1:da31140f2a1c
- Parent:
- 0:b1ce54272580
update
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
kotakku | 0:b1ce54272580 | 1 | /* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. |
kotakku | 0:b1ce54272580 | 2 | |
kotakku | 0:b1ce54272580 | 3 | This program is free software; you can redistribute it and/or modify |
kotakku | 0:b1ce54272580 | 4 | it under the terms of the GNU General Public License as published by |
kotakku | 0:b1ce54272580 | 5 | the Free Software Foundation; either version 2 of the License, or |
kotakku | 0:b1ce54272580 | 6 | (at your option) any later version. |
kotakku | 0:b1ce54272580 | 7 | |
kotakku | 0:b1ce54272580 | 8 | This program is distributed in the hope that it will be useful, |
kotakku | 0:b1ce54272580 | 9 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
kotakku | 0:b1ce54272580 | 10 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
kotakku | 0:b1ce54272580 | 11 | GNU General Public License for more details. |
kotakku | 0:b1ce54272580 | 12 | |
kotakku | 0:b1ce54272580 | 13 | You should have received a copy of the GNU General Public License |
kotakku | 0:b1ce54272580 | 14 | along with this program; if not, write to the Free Software |
kotakku | 0:b1ce54272580 | 15 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
kotakku | 0:b1ce54272580 | 16 | |
kotakku | 0:b1ce54272580 | 17 | Contact information |
kotakku | 0:b1ce54272580 | 18 | ------------------- |
kotakku | 0:b1ce54272580 | 19 | |
kotakku | 0:b1ce54272580 | 20 | Circuits At Home, LTD |
kotakku | 0:b1ce54272580 | 21 | Web : http://www.circuitsathome.com |
kotakku | 0:b1ce54272580 | 22 | e-mail : support@circuitsathome.com |
kotakku | 0:b1ce54272580 | 23 | */ |
kotakku | 0:b1ce54272580 | 24 | |
kotakku | 0:b1ce54272580 | 25 | #include "Usb.h" |
kotakku | 0:b1ce54272580 | 26 | // 0x80 is the default (i.e. trace) to turn off set this global to something lower. |
kotakku | 0:b1ce54272580 | 27 | // this allows for 126 other debugging levels. |
kotakku | 0:b1ce54272580 | 28 | // TO-DO: Allow assignment to a different serial port by software |
kotakku | 0:b1ce54272580 | 29 | int UsbDEBUGlvl = 0x80; |
kotakku | 0:b1ce54272580 | 30 | |
kotakku | 0:b1ce54272580 | 31 | void E_Notifyc(char c, int lvl) { |
kotakku | 0:b1ce54272580 | 32 | if(UsbDEBUGlvl < lvl) return; |
kotakku | 0:b1ce54272580 | 33 | #if defined(ARDUINO) && ARDUINO >=100 |
kotakku | 0:b1ce54272580 | 34 | ////USB_HOST_SERIAL.print(c); |
kotakku | 0:b1ce54272580 | 35 | #else |
kotakku | 0:b1ce54272580 | 36 | //USB_HOST_SERIAL.print(c, BYTE); |
kotakku | 0:b1ce54272580 | 37 | #endif |
kotakku | 0:b1ce54272580 | 38 | ////USB_HOST_SERIAL.flush(); |
kotakku | 0:b1ce54272580 | 39 | } |
kotakku | 0:b1ce54272580 | 40 | |
kotakku | 0:b1ce54272580 | 41 | void E_Notify(char const * msg, int lvl) { |
kotakku | 0:b1ce54272580 | 42 | if(UsbDEBUGlvl < lvl) return; |
kotakku | 0:b1ce54272580 | 43 | if(!msg) return; |
kotakku | 0:b1ce54272580 | 44 | char c; |
kotakku | 0:b1ce54272580 | 45 | |
kotakku | 0:b1ce54272580 | 46 | while((c = pgm_read_byte(msg++))) E_Notifyc(c, lvl); |
kotakku | 0:b1ce54272580 | 47 | } |
kotakku | 0:b1ce54272580 | 48 | |
kotakku | 0:b1ce54272580 | 49 | void E_NotifyStr(char const * msg, int lvl) { |
kotakku | 0:b1ce54272580 | 50 | if(UsbDEBUGlvl < lvl) return; |
kotakku | 0:b1ce54272580 | 51 | if(!msg) return; |
kotakku | 0:b1ce54272580 | 52 | char c; |
kotakku | 0:b1ce54272580 | 53 | |
kotakku | 0:b1ce54272580 | 54 | while((c = *msg++)) E_Notifyc(c, lvl); |
kotakku | 0:b1ce54272580 | 55 | } |
kotakku | 0:b1ce54272580 | 56 | |
kotakku | 0:b1ce54272580 | 57 | void E_Notify(uint8_t b, int lvl) { |
kotakku | 0:b1ce54272580 | 58 | if(UsbDEBUGlvl < lvl) return; |
kotakku | 0:b1ce54272580 | 59 | #if defined(ARDUINO) && ARDUINO >=100 |
kotakku | 0:b1ce54272580 | 60 | //USB_HOST_SERIAL.print(b); |
kotakku | 0:b1ce54272580 | 61 | #else |
kotakku | 0:b1ce54272580 | 62 | //USB_HOST_SERIAL.print(b, DEC); |
kotakku | 0:b1ce54272580 | 63 | #endif |
kotakku | 0:b1ce54272580 | 64 | ////USB_HOST_SERIAL.flush(); |
kotakku | 0:b1ce54272580 | 65 | } |
kotakku | 0:b1ce54272580 | 66 | |
kotakku | 0:b1ce54272580 | 67 | void E_Notify(double d, int lvl) { |
kotakku | 0:b1ce54272580 | 68 | if(UsbDEBUGlvl < lvl) return; |
kotakku | 0:b1ce54272580 | 69 | //USB_HOST_SERIAL.print(d); |
kotakku | 0:b1ce54272580 | 70 | ////USB_HOST_SERIAL.flush(); |
kotakku | 0:b1ce54272580 | 71 | } |
kotakku | 0:b1ce54272580 | 72 | |
kotakku | 0:b1ce54272580 | 73 | #ifdef DEBUG_USB_HOST |
kotakku | 0:b1ce54272580 | 74 | |
kotakku | 0:b1ce54272580 | 75 | void NotifyFailGetDevDescr(void) { |
kotakku | 0:b1ce54272580 | 76 | Notify(PSTR("\r\ngetDevDescr "), 0x80); |
kotakku | 0:b1ce54272580 | 77 | } |
kotakku | 0:b1ce54272580 | 78 | |
kotakku | 0:b1ce54272580 | 79 | void NotifyFailSetDevTblEntry(void) { |
kotakku | 0:b1ce54272580 | 80 | Notify(PSTR("\r\nsetDevTblEn "), 0x80); |
kotakku | 0:b1ce54272580 | 81 | } |
kotakku | 0:b1ce54272580 | 82 | |
kotakku | 0:b1ce54272580 | 83 | void NotifyFailGetConfDescr(void) { |
kotakku | 0:b1ce54272580 | 84 | Notify(PSTR("\r\ngetConf "), 0x80); |
kotakku | 0:b1ce54272580 | 85 | } |
kotakku | 0:b1ce54272580 | 86 | |
kotakku | 0:b1ce54272580 | 87 | void NotifyFailSetConfDescr(void) { |
kotakku | 0:b1ce54272580 | 88 | Notify(PSTR("\r\nsetConf "), 0x80); |
kotakku | 0:b1ce54272580 | 89 | } |
kotakku | 0:b1ce54272580 | 90 | |
kotakku | 0:b1ce54272580 | 91 | void NotifyFailGetDevDescr(uint8_t reason) { |
kotakku | 0:b1ce54272580 | 92 | NotifyFailGetDevDescr(); |
kotakku | 0:b1ce54272580 | 93 | NotifyFail(reason); |
kotakku | 0:b1ce54272580 | 94 | } |
kotakku | 0:b1ce54272580 | 95 | |
kotakku | 0:b1ce54272580 | 96 | void NotifyFailSetDevTblEntry(uint8_t reason) { |
kotakku | 0:b1ce54272580 | 97 | NotifyFailSetDevTblEntry(); |
kotakku | 0:b1ce54272580 | 98 | NotifyFail(reason); |
kotakku | 0:b1ce54272580 | 99 | |
kotakku | 0:b1ce54272580 | 100 | } |
kotakku | 0:b1ce54272580 | 101 | |
kotakku | 0:b1ce54272580 | 102 | void NotifyFailGetConfDescr(uint8_t reason) { |
kotakku | 0:b1ce54272580 | 103 | NotifyFailGetConfDescr(); |
kotakku | 0:b1ce54272580 | 104 | NotifyFail(reason); |
kotakku | 0:b1ce54272580 | 105 | } |
kotakku | 0:b1ce54272580 | 106 | |
kotakku | 0:b1ce54272580 | 107 | void NotifyFailSetConfDescr(uint8_t reason) { |
kotakku | 0:b1ce54272580 | 108 | NotifyFailSetConfDescr(); |
kotakku | 0:b1ce54272580 | 109 | NotifyFail(reason); |
kotakku | 0:b1ce54272580 | 110 | } |
kotakku | 0:b1ce54272580 | 111 | |
kotakku | 0:b1ce54272580 | 112 | void NotifyFailUnknownDevice(uint16_t VID, uint16_t PID) { |
kotakku | 0:b1ce54272580 | 113 | Notify(PSTR("\r\nUnknown Device Connected - VID: "), 0x80); |
kotakku | 0:b1ce54272580 | 114 | D_PrintHex<uint16_t > (VID, 0x80); |
kotakku | 0:b1ce54272580 | 115 | Notify(PSTR(" PID: "), 0x80); |
kotakku | 0:b1ce54272580 | 116 | D_PrintHex<uint16_t > (PID, 0x80); |
kotakku | 0:b1ce54272580 | 117 | } |
kotakku | 0:b1ce54272580 | 118 | |
kotakku | 0:b1ce54272580 | 119 | void NotifyFail(uint8_t rcode) { |
kotakku | 0:b1ce54272580 | 120 | D_PrintHex<uint8_t > (rcode, 0x80); |
kotakku | 0:b1ce54272580 | 121 | Notify(PSTR("\r\n"), 0x80); |
kotakku | 0:b1ce54272580 | 122 | } |
kotakku | 0:b1ce54272580 | 123 | #endif |
kotakku | 0:b1ce54272580 | 124 |