Library to use Arduino USB host shield on mbed
ArduinoのUSB Host Shield 2.0をmbedで使えるようにしたライブラリです。
大体のコードがArduinoからそのまま移植可能です。
Arduino UNOやMega用のホストシールド以外にもミニサイズのホストシールドでも使用可能です
シールドについて
3.3VのI/O用にシールドの改造が必要になりますがネット上に記事がたくさんあるのでそちらを参考にしてください
接続例
使い方
Arduinoのコードと違うのはUSBのインスタンスの宣言部分のみです。
ピンを自分で指定できるようにしたので使いやすくなりました。
仕様
- Arduinoのmillis関数、micros関数の移植のために内部でTimerクラスを使用しています。
main.cpp
#include "mbed.h" #include <PS3BT.h> #include <usbhub.h> Serial pc(USBTX, USBRX, 115200); //Nucleo f303k8用 USB Usb(A6, A5, A4, A3, A2); // mosi, miso, sclk, ssel, intr BTD Btd(&Usb); PS3BT PS3(&Btd); int main() { bool printAngle = false; if (Usb.Init() == -1) { pc.printf("\r\nOSC did not start"); while (1); // Halt } pc.printf("\r\nPS3 USB Library Started"); while (1) { Usb.Task(); if (PS3.PS3Connected || PS3.PS3NavigationConnected) { if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) { pc.printf("\r\nLeftHatX: %d", PS3.getAnalogHat(LeftHatX)); pc.printf("\tLeftHatY: %d", PS3.getAnalogHat(LeftHatY)); if (PS3.PS3Connected) { // The Navigation controller only have one joystick pc.printf("\tRightHatX: %d", PS3.getAnalogHat(RightHatX)); pc.printf("\tRightHatY: %d", PS3.getAnalogHat(RightHatY)); } } // Analog button values can be read from almost all buttons if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) { pc.printf("\r\nL2: %d", PS3.getAnalogButton(L2)); if (!PS3.PS3NavigationConnected) { pc.printf("\tR2: %d", PS3.getAnalogButton(R2)); } } if (PS3.getButtonClick(PS)) { PS3.disconnect(); pc.printf("\r\nPS"); } if (PS3.getButtonClick(TRIANGLE)) pc.printf("\r\nTriangle"); if (PS3.getButtonClick(CIRCLE)) pc.printf("\r\nCircle"); if (PS3.getButtonClick(CROSS)) pc.printf("\r\nCross"); if (PS3.getButtonClick(SQUARE)) pc.printf("\r\nSquare"); if (PS3.getButtonClick(UP)) { pc.printf("\r\nUp"); PS3.setLedOff(); PS3.setLedOn(CONTROLLER_LED4); } if (PS3.getButtonClick(RIGHT)) { pc.printf("\r\nRight"); PS3.setLedOff(); PS3.setLedOn(CONTROLLER_LED1); } if (PS3.getButtonClick(DOWN)) { pc.printf("\r\nDown"); PS3.setLedOff(); PS3.setLedOn(CONTROLLER_LED2); } if (PS3.getButtonClick(LEFT)) { pc.printf("\r\nLeft"); PS3.setLedOff(); PS3.setLedOn(CONTROLLER_LED3); } if (PS3.getButtonClick(L1)) pc.printf("\r\nL1"); if (PS3.getButtonClick(L3)) pc.printf("\r\nL3"); if (PS3.getButtonClick(R1)) pc.printf("\r\nR1"); if (PS3.getButtonClick(R3)) pc.printf("\r\nR3"); if (PS3.getButtonClick(SELECT)) { pc.printf("\r\nSelect - "); PS3.printStatusString(); } if (PS3.getButtonClick(START)) { pc.printf("\r\nStart"); printAngle = !printAngle; } if (printAngle) { pc.printf("\r\nPitch: %.3lf", PS3.getAngle(Pitch)); pc.printf("\tRoll: %.3lf", PS3.getAngle(Roll)); } } else { pc.printf("not connect\n"); } } }
USB_Host/hexdump.h@1:da31140f2a1c, 2020-05-02 (annotated)
- Committer:
- robo_ichinoseki_a
- Date:
- Sat May 02 05:56:48 2020 +0000
- Revision:
- 1:da31140f2a1c
- Parent:
- 0:b1ce54272580
update
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
kotakku | 0:b1ce54272580 | 1 | /* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. |
kotakku | 0:b1ce54272580 | 2 | |
kotakku | 0:b1ce54272580 | 3 | This program is free software; you can redistribute it and/or modify |
kotakku | 0:b1ce54272580 | 4 | it under the terms of the GNU General Public License as published by |
kotakku | 0:b1ce54272580 | 5 | the Free Software Foundation; either version 2 of the License, or |
kotakku | 0:b1ce54272580 | 6 | (at your option) any later version. |
kotakku | 0:b1ce54272580 | 7 | |
kotakku | 0:b1ce54272580 | 8 | This program is distributed in the hope that it will be useful, |
kotakku | 0:b1ce54272580 | 9 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
kotakku | 0:b1ce54272580 | 10 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
kotakku | 0:b1ce54272580 | 11 | GNU General Public License for more details. |
kotakku | 0:b1ce54272580 | 12 | |
kotakku | 0:b1ce54272580 | 13 | You should have received a copy of the GNU General Public License |
kotakku | 0:b1ce54272580 | 14 | along with this program; if not, write to the Free Software |
kotakku | 0:b1ce54272580 | 15 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
kotakku | 0:b1ce54272580 | 16 | |
kotakku | 0:b1ce54272580 | 17 | Contact information |
kotakku | 0:b1ce54272580 | 18 | ------------------- |
kotakku | 0:b1ce54272580 | 19 | |
kotakku | 0:b1ce54272580 | 20 | Circuits At Home, LTD |
kotakku | 0:b1ce54272580 | 21 | Web : http://www.circuitsathome.com |
kotakku | 0:b1ce54272580 | 22 | e-mail : support@circuitsathome.com |
kotakku | 0:b1ce54272580 | 23 | */ |
kotakku | 0:b1ce54272580 | 24 | |
kotakku | 0:b1ce54272580 | 25 | #if !defined(_usb_h_) || defined(__HEXDUMP_H__) |
kotakku | 0:b1ce54272580 | 26 | #error "Never include hexdump.h directly; include Usb.h instead" |
kotakku | 0:b1ce54272580 | 27 | #else |
kotakku | 0:b1ce54272580 | 28 | #define __HEXDUMP_H__ |
kotakku | 0:b1ce54272580 | 29 | |
kotakku | 0:b1ce54272580 | 30 | extern int UsbDEBUGlvl; |
kotakku | 0:b1ce54272580 | 31 | |
kotakku | 0:b1ce54272580 | 32 | template <class BASE_CLASS, class LEN_TYPE, class OFFSET_TYPE> |
kotakku | 0:b1ce54272580 | 33 | class HexDumper : public BASE_CLASS { |
kotakku | 0:b1ce54272580 | 34 | uint8_t byteCount; |
kotakku | 0:b1ce54272580 | 35 | OFFSET_TYPE byteTotal; |
kotakku | 0:b1ce54272580 | 36 | |
kotakku | 0:b1ce54272580 | 37 | public: |
kotakku | 0:b1ce54272580 | 38 | |
kotakku | 0:b1ce54272580 | 39 | HexDumper() : byteCount(0), byteTotal(0) { |
kotakku | 0:b1ce54272580 | 40 | }; |
kotakku | 0:b1ce54272580 | 41 | |
kotakku | 0:b1ce54272580 | 42 | void Initialize() { |
kotakku | 0:b1ce54272580 | 43 | byteCount = 0; |
kotakku | 0:b1ce54272580 | 44 | byteTotal = 0; |
kotakku | 0:b1ce54272580 | 45 | }; |
kotakku | 0:b1ce54272580 | 46 | |
kotakku | 0:b1ce54272580 | 47 | void Parse(const LEN_TYPE len, const uint8_t *pbuf, const OFFSET_TYPE &offset); |
kotakku | 0:b1ce54272580 | 48 | }; |
kotakku | 0:b1ce54272580 | 49 | |
kotakku | 0:b1ce54272580 | 50 | template <class BASE_CLASS, class LEN_TYPE, class OFFSET_TYPE> |
kotakku | 0:b1ce54272580 | 51 | void HexDumper<BASE_CLASS, LEN_TYPE, OFFSET_TYPE>::Parse(const LEN_TYPE len, const uint8_t *pbuf, const OFFSET_TYPE &offset __attribute__((unused))) { |
kotakku | 0:b1ce54272580 | 52 | if(UsbDEBUGlvl >= 0x80) { // Fully bypass this block of code if we do not debug. |
kotakku | 0:b1ce54272580 | 53 | for(LEN_TYPE j = 0; j < len; j++, byteCount++, byteTotal++) { |
kotakku | 0:b1ce54272580 | 54 | if(!byteCount) { |
kotakku | 0:b1ce54272580 | 55 | PrintHex<OFFSET_TYPE > (byteTotal, 0x80); |
kotakku | 0:b1ce54272580 | 56 | E_Notify(PSTR(": "), 0x80); |
kotakku | 0:b1ce54272580 | 57 | } |
kotakku | 0:b1ce54272580 | 58 | PrintHex<uint8_t > (pbuf[j], 0x80); |
kotakku | 0:b1ce54272580 | 59 | E_Notify(PSTR(" "), 0x80); |
kotakku | 0:b1ce54272580 | 60 | |
kotakku | 0:b1ce54272580 | 61 | if(byteCount == 15) { |
kotakku | 0:b1ce54272580 | 62 | E_Notify(PSTR("\r\n"), 0x80); |
kotakku | 0:b1ce54272580 | 63 | byteCount = 0xFF; |
kotakku | 0:b1ce54272580 | 64 | } |
kotakku | 0:b1ce54272580 | 65 | } |
kotakku | 0:b1ce54272580 | 66 | } |
kotakku | 0:b1ce54272580 | 67 | } |
kotakku | 0:b1ce54272580 | 68 | |
kotakku | 0:b1ce54272580 | 69 | #endif // __HEXDUMP_H__ |
kotakku | 0:b1ce54272580 | 70 |