Kevin Kadooka
/
mbed-dev
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed-dev
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_STM32L4/stm32l4xx_ll_bus.h
- Revision:
- 144:ef7eb2e8f9f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L4/stm32l4xx_ll_bus.h Fri Sep 02 15:07:44 2016 +0100
@@ -0,0 +1,1695 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_bus.h
+ * @author MCD Application Team
+ * @version V1.5.1
+ * @date 31-May-2016
+ * @brief Header file of BUS LL module.
+
+ @verbatim
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_BUS_H
+#define __STM32L4xx_LL_BUS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup BUS_LL BUS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
+ * @{
+ */
+
+/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN
+#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN
+#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHB1ENR_FLASHEN
+#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN
+#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHB1ENR_TSCEN
+#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1SMENR_SRAM1SMEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB2_GRP1_PERIPH_SRAM2 RCC_AHB2SMENR_SRAM2SMEN
+#define LL_AHB2_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_AHB2_GRP1_PERIPH_GPIOA RCC_AHB2ENR_GPIOAEN
+#define LL_AHB2_GRP1_PERIPH_GPIOB RCC_AHB2ENR_GPIOBEN
+#define LL_AHB2_GRP1_PERIPH_GPIOC RCC_AHB2ENR_GPIOCEN
+#if defined(GPIOD)
+#define LL_AHB2_GRP1_PERIPH_GPIOD RCC_AHB2ENR_GPIODEN
+#endif /*GPIOD*/
+#if defined(GPIOE)
+#define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_GPIOEEN
+#endif /*GPIOE*/
+#if defined(GPIOF)
+#define LL_AHB2_GRP1_PERIPH_GPIOF RCC_AHB2ENR_GPIOFEN
+#endif /* GPIOF */
+#if defined(GPIOG)
+#define LL_AHB2_GRP1_PERIPH_GPIOG RCC_AHB2ENR_GPIOGEN
+#endif /* GPIOG */
+#define LL_AHB2_GRP1_PERIPH_GPIOH RCC_AHB2ENR_GPIOHEN
+#if defined(USB_OTG_FS)
+#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN
+#endif /* USB_OTG_FS */
+#define LL_AHB2_GRP1_PERIPH_ADC RCC_AHB2ENR_ADCEN
+#if defined(AES)
+#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN
+#endif /* AES */
+#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB3_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#if defined(FMC_Bank1_R)
+#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN
+#endif /* FMC_Bank1_R */
+#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR1_TIM2EN
+#if defined(TIM3)
+#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR1_TIM3EN
+#endif /* TIM3 */
+#if defined(TIM4)
+#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR1_TIM4EN
+#endif /* TIM4 */
+#if defined(TIM5)
+#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR1_TIM5EN
+#endif /* TIM5 */
+#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR1_TIM6EN
+#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR1_TIM7EN
+#if defined(LCD)
+#define LL_APB1_GRP1_PERIPH_LCD RCC_APB1ENR1_LCDEN
+#endif /* LCD */
+#if defined(RCC_APB1ENR1_RTCAPBEN)
+#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR1_RTCAPBEN
+#endif /* RCC_APB1ENR1_RTCAPBEN */
+#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR1_WWDGEN
+#if defined(SPI2)
+#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR1_SPI2EN
+#endif /* SPI2 */
+#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR1_SPI3EN
+#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR1_USART2EN
+#if defined(USART3)
+#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR1_USART3EN
+#endif /* USART3 */
+#if defined(UART4)
+#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR1_UART4EN
+#endif /* UART4 */
+#if defined(UART5)
+#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR1_UART5EN
+#endif /* UART5 */
+#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR1_I2C1EN
+#if defined(I2C2)
+#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR1_I2C2EN
+#endif /* I2C2 */
+#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR1_I2C3EN
+#if defined(CRS)
+#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR1_CRSEN
+#endif /* CRS */
+#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR1_CAN1EN
+#if defined(USB)
+#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR1_USBFSEN
+#endif /* USB */
+#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR1_PWREN
+#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR1_DAC1EN
+#define LL_APB1_GRP1_PERIPH_OPAMP RCC_APB1ENR1_OPAMPEN
+#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR1_LPTIM1EN
+/**
+ * @}
+ */
+
+
+/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP2_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB1_GRP2_PERIPH_LPUART1 RCC_APB1ENR2_LPUART1EN
+#define LL_APB1_GRP2_PERIPH_SWPMI1 RCC_APB1ENR2_SWPMI1EN
+#define LL_APB1_GRP2_PERIPH_LPTIM2 RCC_APB1ENR2_LPTIM2EN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB2_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
+#define LL_APB2_GRP1_PERIPH_FW RCC_APB2ENR_FWEN
+#if defined(SDMMC1)
+#define LL_APB2_GRP1_PERIPH_SDMMC1 RCC_APB2ENR_SDMMC1EN
+#endif /* SDMMC1 */
+#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
+#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
+#if defined(TIM8)
+#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
+#endif /* TIM8 */
+#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
+#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
+#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
+#if defined(TIM17)
+#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
+#endif /* TIM17 */
+#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN
+#if defined(SAI2)
+#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN
+#endif /* SAI2 */
+#if defined(DFSDM1_Channel0)
+#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN
+#endif /* DFSDM1_Channel0 */
+/**
+ * @}
+ */
+
+/** Legacy definitions for compatibility purpose
+@cond 0
+*/
+#if defined(DFSDM1_Channel0)
+#define LL_APB2_GRP1_PERIPH_DFSDM LL_APB2_GRP1_PERIPH_DFSDM1
+#endif /* DFSDM1_Channel0 */
+/**
+@endcond
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
+ * @{
+ */
+
+/** @defgroup BUS_LL_EF_AHB1 AHB1
+ * @{
+ */
+
+/**
+ * @brief Enable AHB1 peripherals clock.
+ * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR FLASHEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR TSCEN LL_AHB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB1 peripheral clock is enabled or not
+ * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR TSCEN LL_AHB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB1 peripherals clock.
+ * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR FLASHEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR TSCEN LL_AHB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB1 peripherals reset.
+ * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR FLASHRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR TSCRST LL_AHB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB1 peripherals reset.
+ * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR TSCRST LL_AHB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR DMA2SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR TSCSMEN LL_AHB1_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB1SMENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB1SMENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR DMA2SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR TSCSMEN LL_AHB1_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1SMENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_AHB2 AHB2
+ * @{
+ */
+
+/**
+ * @brief Enable AHB2 peripherals clock.
+ * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOBEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOCEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIODEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOEEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOFEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOGEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOHEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR ADCEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB2 peripheral clock is enabled or not
+ * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOBEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOCEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIODEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOEEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOFEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOGEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOHEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR ADCEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB2 peripherals clock.
+ * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOBEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOCEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIODEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOEEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOFEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOGEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOHEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR ADCEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB2 peripherals reset.
+ * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOBRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOCRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIODRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOERST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOFRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOGRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOHRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR ADCRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB2 peripherals reset.
+ * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOBRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOCRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIODRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOERST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOFRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOGRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOHRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR ADCRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB2 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIODSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOESMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR OTGFSSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR ADCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR AESSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR RNGSMEN LL_AHB2_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB2SMENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB2SMENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB2 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIODSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOESMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR OTGFSSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR ADCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR AESSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR RNGSMEN LL_AHB2_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2SMENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_AHB3 AHB3
+ * @{
+ */
+
+/**
+ * @brief Enable AHB3 peripherals clock.
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB3ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB3ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB3 peripheral clock is enabled or not
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB3 peripherals clock.
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB3 peripherals reset.
+ * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n
+ * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB3RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB3 peripherals reset.
+ * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n
+ * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB3 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_EnableClockStopSleep\n
+ * AHB3SMENR QSPISMEN LL_AHB3_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB3SMENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB3SMENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB3 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_DisableClockStopSleep\n
+ * AHB3SMENR QSPISMEN LL_AHB3_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3SMENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1 APB1
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock.
+ * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM6EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM7EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 LCDEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 WWDGEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 SPI2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 SPI3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 USART2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 USART3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 UART4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 UART5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 I2C1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 I2C2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 I2C3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 CRSEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 CAN1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 PWREN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 DAC1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 OPAMPEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 LPTIM1EN LL_APB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR1, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR1, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Enable APB1 peripherals clock.
+ * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_EnableClock\n
+ * APB1ENR2 SWPMI1EN LL_APB1_GRP2_EnableClock\n
+ * APB1ENR2 LPTIM2EN LL_APB1_GRP2_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR2, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR2, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not
+ * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 LCDEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 UART4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 UART5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 CRSEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 CAN1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 DAC1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 OPAMPEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR1, Periphs) == Periphs);
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not
+ * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB1ENR2 SWPMI1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB1ENR2 LPTIM2EN LL_APB1_GRP2_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR2, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock.
+ * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM6EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM7EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 LCDEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 WWDGEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 SPI2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 SPI3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 USART2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 USART3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 UART4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 UART5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 I2C1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 I2C2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 I2C3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 CRSEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 CAN1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 PWREN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 DAC1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 OPAMPEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 LPTIM1EN LL_APB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR1, Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock.
+ * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_DisableClock\n
+ * APB1ENR2 SWPMI1EN LL_APB1_GRP2_DisableClock\n
+ * APB1ENR2 LPTIM2EN LL_APB1_GRP2_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR2, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset.
+ * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 LCDRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 USART2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 USART3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 UART4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 UART5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 CRSRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 CAN1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 PWRRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 DAC1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 OPAMPRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR1, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset.
+ * @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ForceReset\n
+ * APB1RSTR2 SWPMI1RST LL_APB1_GRP2_ForceReset\n
+ * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR2, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset.
+ * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 LCDRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 UART4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 UART5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 CRSRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 CAN1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 DAC1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 OPAMPRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR1, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset.
+ * @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB1RSTR2 SWPMI1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR2, Periphs);
+}
+
+/**
+ * @brief Enable APB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM4SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM5SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM6SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM7SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 LCDSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 SPI2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 SPI3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 USART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 USART3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 UART4SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 UART5SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 I2C2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 I2C3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 CRSSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 CAN1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 DAC1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1SMENR1, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1SMENR1, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Enable APB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_EnableClockStopSleep\n
+ * APB1SMENR2 SWPMI1SMEN LL_APB1_GRP2_EnableClockStopSleep\n
+ * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1SMENR2, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1SMENR2, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable APB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM4SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM5SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM6SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM7SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 LCDSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 SPI2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 SPI3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 USART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 USART3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 UART4SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 UART5SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 I2C2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 I2C3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 CRSSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 CAN1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 DAC1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1SMENR1, Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_DisableClockStopSleep\n
+ * APB1SMENR2 SWPMI1SMEN LL_APB1_GRP2_DisableClockStopSleep\n
+ * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1SMENR2, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB2 APB2
+ * @{
+ */
+
+/**
+ * @brief Enable APB2 peripherals clock.
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR FWEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_FW
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB2 peripheral clock is enabled or not
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR FWEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_FW
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB2 peripherals clock.
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2ENR, Periphs);
+}
+
+/**
+ * @brief Force APB2 peripherals reset.
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SDMMC1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB2 peripherals reset.
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SDMMC1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Enable APB2 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR SDMMC1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM8SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM15SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR SAI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR SAI2SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR DFSDM1SMEN LL_APB2_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2SMENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2SMENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable APB2 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR SDMMC1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM8SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM15SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR SAI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR SAI2SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR DFSDM1SMEN LL_APB2_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2SMENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_BUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/