Kevin Kadooka / mbed-dev

Fork of mbed-dev build 137, last build before FAT file system appears to be broken. Also reduced HSE timeout time in STM4XX HAL

Fork of mbed-dev by mbed official

targets/TARGET_Freescale/TARGET_KLXX/gpio_api.c@167:356ef919c855, 2017-06-20 (annotated)

Committer:
kkado
Date:
Tue Jun 20 11:06:37 2017 +0000
Revision:
167:356ef919c855
Parent:
149:156823d33999 
Build 137 with reduced HSE timeout

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 * Copyright (c) 2006-2013 ARM Limited
<> 144:ef7eb2e8f9f7 3 *
<> 144:ef7eb2e8f9f7 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 144:ef7eb2e8f9f7 5 * you may not use this file except in compliance with the License.
<> 144:ef7eb2e8f9f7 6 * You may obtain a copy of the License at
<> 144:ef7eb2e8f9f7 7 *
<> 144:ef7eb2e8f9f7 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 144:ef7eb2e8f9f7 9 *
<> 144:ef7eb2e8f9f7 10 * Unless required by applicable law or agreed to in writing, software
<> 144:ef7eb2e8f9f7 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 144:ef7eb2e8f9f7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 144:ef7eb2e8f9f7 13 * See the License for the specific language governing permissions and
<> 144:ef7eb2e8f9f7 14 * limitations under the License.
<> 144:ef7eb2e8f9f7 15 */
<> 144:ef7eb2e8f9f7 16 #include "mbed_assert.h"
<> 144:ef7eb2e8f9f7 17 #include "gpio_api.h"
<> 144:ef7eb2e8f9f7 18 #include "pinmap.h"
<> 144:ef7eb2e8f9f7 19
<> 144:ef7eb2e8f9f7 20 uint32_t gpio_set(PinName pin) {
<> 144:ef7eb2e8f9f7 21 MBED_ASSERT(pin != (PinName)NC);
<> 144:ef7eb2e8f9f7 22 pin_function(pin, 1);
<> 144:ef7eb2e8f9f7 23 return 1 << ((pin & 0x7F) >> 2);
<> 144:ef7eb2e8f9f7 24 }
<> 144:ef7eb2e8f9f7 25
<> 144:ef7eb2e8f9f7 26 void gpio_init(gpio_t *obj, PinName pin) {
<> 144:ef7eb2e8f9f7 27 obj->pin = pin;
<> 144:ef7eb2e8f9f7 28 if (pin == (PinName)NC)
<> 144:ef7eb2e8f9f7 29 return;
<> 144:ef7eb2e8f9f7 30
<> 144:ef7eb2e8f9f7 31 obj->mask = gpio_set(pin);
<> 144:ef7eb2e8f9f7 32
<> 144:ef7eb2e8f9f7 33 unsigned int port = (unsigned int)pin >> PORT_SHIFT;
<> 144:ef7eb2e8f9f7 34
<> 144:ef7eb2e8f9f7 35 #if defined(TARGET_KL43Z)
<> 144:ef7eb2e8f9f7 36 GPIO_Type *reg = (GPIO_Type *)(GPIOA_BASE + port * 0x40);
<> 144:ef7eb2e8f9f7 37 #else
<> 144:ef7eb2e8f9f7 38 FGPIO_Type *reg = (FGPIO_Type *)(FPTA_BASE + port * 0x40);
<> 144:ef7eb2e8f9f7 39 #endif
<> 144:ef7eb2e8f9f7 40 obj->reg_set = &reg->PSOR;
<> 144:ef7eb2e8f9f7 41 obj->reg_clr = &reg->PCOR;
<> 144:ef7eb2e8f9f7 42 obj->reg_in = &reg->PDIR;
<> 144:ef7eb2e8f9f7 43 obj->reg_dir = &reg->PDDR;
<> 144:ef7eb2e8f9f7 44 }
<> 144:ef7eb2e8f9f7 45
<> 144:ef7eb2e8f9f7 46 void gpio_mode(gpio_t *obj, PinMode mode) {
<> 144:ef7eb2e8f9f7 47 pin_mode(obj->pin, mode);
<> 144:ef7eb2e8f9f7 48 }
<> 144:ef7eb2e8f9f7 49
<> 144:ef7eb2e8f9f7 50 void gpio_dir(gpio_t *obj, PinDirection direction) {
<> 144:ef7eb2e8f9f7 51 MBED_ASSERT(obj->pin != (PinName)NC);
<> 144:ef7eb2e8f9f7 52 switch (direction) {
<> 144:ef7eb2e8f9f7 53 case PIN_INPUT :
<> 144:ef7eb2e8f9f7 54 *obj->reg_dir &= ~obj->mask;
<> 144:ef7eb2e8f9f7 55 break;
<> 144:ef7eb2e8f9f7 56 case PIN_OUTPUT:
<> 144:ef7eb2e8f9f7 57 *obj->reg_dir |= obj->mask;
<> 144:ef7eb2e8f9f7 58 break;
<> 144:ef7eb2e8f9f7 59 }
<> 144:ef7eb2e8f9f7 60 }