Fork of mbed-dev build 137, last build before FAT file system appears to be broken. Also reduced HSE timeout time in STM4XX HAL
Fork of mbed-dev by
Diff: targets/TARGET_Freescale/TARGET_KLXX/pwmout_api.c
- Revision:
- 149:156823d33999
- Parent:
- 144:ef7eb2e8f9f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_Freescale/TARGET_KLXX/pwmout_api.c Fri Oct 28 11:17:30 2016 +0100 @@ -0,0 +1,125 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "mbed_assert.h" +#include "pwmout_api.h" + +#include "cmsis.h" +#include "pinmap.h" +#include "clk_freqs.h" +#include "PeripheralPins.h" + +static float pwm_clock; + +void pwmout_init(pwmout_t* obj, PinName pin) { + // determine the channel + PWMName pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM); + MBED_ASSERT(pwm != (PWMName)NC); + + uint32_t clkdiv = 0; + float clkval; + +#if defined(TARGET_KL43Z) + if (mcgirc_frequency()) { + SIM->SOPT2 |= SIM_SOPT2_TPMSRC(3); // Clock source: MCGIRCLK + clkval = mcgirc_frequency() / 1000000.0f; + } else { + SIM->SOPT2 |= SIM_SOPT2_TPMSRC(1); // Clock source: IRC48M + clkval = CPU_INT_IRC_CLK_HZ / 1000000.0f; + } +#else + if (mcgpllfll_frequency()) { + SIM->SOPT2 |= SIM_SOPT2_TPMSRC(1); // Clock source: MCGFLLCLK or MCGPLLCLK + clkval = mcgpllfll_frequency() / 1000000.0f; + } else { + SIM->SOPT2 |= SIM_SOPT2_TPMSRC(2); // Clock source: ExtOsc + clkval = extosc_frequency() / 1000000.0f; + } +#endif + while (clkval > 1) { + clkdiv++; + clkval /= 2.0; + if (clkdiv == 7) + break; + } + + pwm_clock = clkval; + unsigned int port = (unsigned int)pin >> PORT_SHIFT; + unsigned int tpm_n = (pwm >> TPM_SHIFT); + unsigned int ch_n = (pwm & 0xFF); + + SIM->SCGC5 |= 1 << (SIM_SCGC5_PORTA_SHIFT + port); + SIM->SCGC6 |= 1 << (SIM_SCGC6_TPM0_SHIFT + tpm_n); + + TPM_Type *tpm = (TPM_Type *)(TPM0_BASE + 0x1000 * tpm_n); + tpm->SC = TPM_SC_CMOD(1) | TPM_SC_PS(clkdiv); // (clock)MHz / clkdiv ~= (0.75)MHz + tpm->CONTROLS[ch_n].CnSC = (TPM_CnSC_MSB_MASK | TPM_CnSC_ELSB_MASK); /* No Interrupts; High True pulses on Edge Aligned PWM */ + + obj->CnV = &tpm->CONTROLS[ch_n].CnV; + obj->MOD = &tpm->MOD; + obj->CNT = &tpm->CNT; + + // default to 20ms: standard for servos, and fine for e.g. brightness control + pwmout_period_ms(obj, 20); + pwmout_write (obj, 0); + + // Wire pinout + pinmap_pinout(pin, PinMap_PWM); +} + +void pwmout_free(pwmout_t* obj) {} + +void pwmout_write(pwmout_t* obj, float value) { + if (value < 0.0) { + value = 0.0; + } else if (value > 1.0) { + value = 1.0; + } + + *obj->CnV = (uint32_t)((float)(*obj->MOD + 1) * value); + *obj->CNT = 0; +} + +float pwmout_read(pwmout_t* obj) { + float v = (float)(*obj->CnV) / (float)(*obj->MOD + 1); + return (v > 1.0) ? (1.0) : (v); +} + +void pwmout_period(pwmout_t* obj, float seconds) { + pwmout_period_us(obj, seconds * 1000000.0f); +} + +void pwmout_period_ms(pwmout_t* obj, int ms) { + pwmout_period_us(obj, ms * 1000); +} + +// Set the PWM period, keeping the duty cycle the same. +void pwmout_period_us(pwmout_t* obj, int us) { + float dc = pwmout_read(obj); + *obj->MOD = (uint32_t)(pwm_clock * (float)us) - 1; + pwmout_write(obj, dc); +} + +void pwmout_pulsewidth(pwmout_t* obj, float seconds) { + pwmout_pulsewidth_us(obj, seconds * 1000000.0f); +} + +void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) { + pwmout_pulsewidth_us(obj, ms * 1000); +} + +void pwmout_pulsewidth_us(pwmout_t* obj, int us) { + *obj->CnV = (uint32_t)(pwm_clock * (float)us); +}