Diff: main.cpp

Revision:

0:68ca78749806

diff -r 000000000000 -r 68ca78749806 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Mar 11 09:24:37 2019 +0000
@@ -0,0 +1,245 @@
+#include "mbed.h"
+#include "mbed_trace.h"
+#include "mbed_events.h"
+#include "LoRaWANInterface.h"
+#include "SX1276_LoRaRadio.h"
+#include "CayenneLPP.h"
+#include "lora_radio_helper.h"
+#include "standby.h"
+#include "GPS.h"
+#include "ADXL345_I2C.h"
+
+
+#define GPSBaud 9600
+#define     STANDBY_TIME_S        1 * 60
+#define     SENSOR_READ_ATTEMPTS  3
+#define     SENSOR_WAIT_TIME      3000 //slow sensor, no more than once per 2 seconds
+  
+
+
+static uint32_t DEVADDR_1 = 0x260118F6;
+static uint8_t NWKSKEY_1[] = { 0x90, 0xF9, 0x6E, 0x7E, 0x9C, 0x38, 0x75, 0xD5, 0x59, 0x75, 0x6D, 0x91, 0x62, 0x22, 0x73, 0x1C };
+static uint8_t APPSKEY_1[] = { 0x73, 0x0B, 0x09, 0xB7, 0x93, 0xBA, 0x69, 0xEF, 0x69, 0xC4, 0x0E, 0xEF, 0xBD, 0x43, 0x19, 0x61 };
+
+
+static Serial pc(SERIAL_TX, SERIAL_RX, 9600);
+static GPS gps(PA_9, PB_7);
+ADXL345_I2C accelerometer(D14, D15);
+
+
+// The port we're sending and receiving on
+#define MBED_CONF_LORA_APP_PORT     15
+
+
+
+// EventQueue is required to dispatch events around
+static EventQueue ev_queue;
+
+// Constructing Mbed LoRaWANInterface and passing it down the radio object.
+static LoRaWANInterface lorawan(radio);
+
+// Application specific callbacks
+static lorawan_app_callbacks_t callbacks;
+
+// LoRaWAN stack event handler
+static void lora_event_handler(lorawan_event_t event);
+
+// Send a message over LoRaWAN
+static void send_message() {
+    CayenneLPP payload(50);
+      
+        if( gps.sample() == 1) {
+           
+          float latitude = gps.latitude;
+           float longitude = gps.longitude;
+            float altitude= (gps.utc/100)+465;
+            
+            
+            printf("latitude: %0.4f, longitude: %0.4f, altitude: %f\r\n",latitude,longitude,altitude);
+            
+           payload.addGPS(2, latitude,longitude,altitude);  
+             
+            
+            wait(1);
+            
+             } 
+             else
+             {
+                 printf("no gps detected");
+                 }
+       
+       int readings[3] = {0, 0, 0};
+    
+    printf("\n Animal activity \n");
+    
+     printf("Device ID is: 0x%02x\n", accelerometer.getDeviceID());
+    wait(.001);
+    
+    if (accelerometer.setPowerControl(0x00)){
+         printf("didn't intitialize power control\n"); 
+         }
+     //Full resolution, +/-16g, 4mg/LSB.
+     wait(.001);
+     
+     if(accelerometer.setDataFormatControl(0x0B)){
+        printf("didn't set data format\n");
+         }
+     wait(.001);
+     
+     //3.2kHz data rate.
+     if(accelerometer.setDataRate(ADXL345_3200HZ)){
+        printf("didn't set data rate\n");
+            }
+     wait(.001);
+     
+     //Measurement mode.
+     
+     if(accelerometer.setPowerControl(MeasurementMode)) {
+        printf("didn't set the power control to measurement\n"); 
+          } 
+         wait(0.01);
+         
+         accelerometer.getOutput(readings);
+         
+
+        printf("X-axis= %i, Y-axis= %i, Z-axis= %i\n", (int16_t)readings[0], (int16_t)readings[1], (int16_t)readings[2]);
+        
+        payload.addAccelerometer(3,  readings[0], readings[1], readings[2]);
+        
+        wait(2);
+
+       
+    
+       
+       
+
+    if (payload.getSize() > 0) {
+      printf("Sending %d bytes\n", payload.getSize());
+
+      int16_t retcode = lorawan.send(MBED_CONF_LORA_APP_PORT, payload.getBuffer(), payload.getSize(), MSG_UNCONFIRMED_FLAG);
+
+    // for some reason send() ret\urns -1... I cannot find out why, the stack returns the right number. I feel that this is some weird Emscripten quirk
+      if (retcode < 0) {
+        retcode == LORAWAN_STATUS_WOULD_BLOCK ? printf("send - duty cycle violation\n")
+            : printf("send() - Error code %d\n", retcode);
+
+        standby(STANDBY_TIME_S);
+      }
+
+      printf("%d bytes scheduled for transmission\n", retcode);
+    }
+
+    else
+      standby(STANDBY_TIME_S);
+}
+
+int main() {
+    set_time(0);
+
+    printf("\r==========================\n");
+    printf("\r  cattle monitor     \n");
+    printf("\r==========================\n");
+
+    printf("Sending every %d seconds\n", STANDBY_TIME_S);
+
+    // Enable trace output for this demo, so we can see what the LoRaWAN stack does
+    mbed_trace_init();
+
+    if (lorawan.initialize(&ev_queue) != LORAWAN_STATUS_OK) {
+        printf("LoRa initialization failed!\n");
+        return -1;
+    }
+
+    // prepare application callbacks
+    callbacks.events = mbed::callback(lora_event_handler);
+    lorawan.add_app_callbacks(&callbacks);
+
+    // Disable adaptive data rating
+    if (lorawan.disable_adaptive_datarate() != LORAWAN_STATUS_OK) {
+        printf("\rdisable_adaptive_datarate failed!\n");
+        return -1;
+    }
+
+    lorawan.set_datarate(0); // SF12BW125
+
+    lorawan_connect_t connect_params;
+    connect_params.connect_type = LORAWAN_CONNECTION_ABP;
+
+    connect_params.connection_u.abp.dev_addr = DEVADDR_1;
+    connect_params.connection_u.abp.nwk_skey = NWKSKEY_1;
+    connect_params.connection_u.abp.app_skey = APPSKEY_1;
+
+    lorawan_status_t retcode = lorawan.connect(connect_params);
+
+    if (retcode == LORAWAN_STATUS_OK ||
+        retcode == LORAWAN_STATUS_CONNECT_IN_PROGRESS) {
+    } else {
+        printf("Connection error, code = %d\n", retcode);
+        return -1;
+    }
+
+    printf("Connection - In Progress ...\r\n");
+
+    // make your event queue dispatching events forever
+    ev_queue.dispatch_forever();
+}
+
+// This is called from RX_DONE, so whenever a message came in
+static void receive_message()
+{
+    uint8_t rx_buffer[50] = { 0 };
+    int16_t retcode;
+    retcode = lorawan.receive(MBED_CONF_LORA_APP_PORT, rx_buffer,
+                              sizeof(rx_buffer),
+                              MSG_UNCONFIRMED_FLAG);
+
+    if (retcode < 0) {
+        printf("receive() - Error code %d\n", retcode);
+        return;
+    }
+
+    printf("Data received on port %d (length %d): ", MBED_CONF_LORA_APP_PORT, retcode);
+
+    for (uint8_t i = 0; i < retcode; i++) {
+        printf("%02x ", rx_buffer[i]);
+    }
+    printf("\n");
+}
+
+// Event handler
+static void lora_event_handler(lorawan_event_t event) {
+    switch (event) {
+        case CONNECTED:
+            printf("Connection - Successful\n");
+            ev_queue.call_in(1000, &send_message);
+            break;
+        case DISCONNECTED:
+            ev_queue.break_dispatch();
+            printf("Disconnected Successfully\n");
+            break;
+        case TX_DONE:
+            printf("Message Sent to Network Server\n");
+            standby(STANDBY_TIME_S);
+            break;
+        case TX_TIMEOUT:
+        case TX_ERROR:
+        case TX_CRYPTO_ERROR:
+        case TX_SCHEDULING_ERROR:
+            printf("Transmission Error - EventCode = %d\n", event);
+            standby(STANDBY_TIME_S);
+            break;
+        case RX_DONE:
+            printf("Received message from Network Server\n");
+            receive_message();
+            break;
+        case RX_TIMEOUT:
+        case RX_ERROR:
+            printf("Error in reception - Code = %d\n", event);
+            break;
+        case JOIN_FAILURE:
+            printf("OTAA Failed - Check Keys\n");
+            break;
+        default:
+            MBED_ASSERT("Unknown Event");
+    }
+}