RTC auf true
Diff: components/storage/blockdevice/COMPONENT_SPIF/SPIFBlockDevice.h
- Revision:
- 2:7aab896b1a3b
diff -r 7bcfbc328423 -r 7aab896b1a3b components/storage/blockdevice/COMPONENT_SPIF/SPIFBlockDevice.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/components/storage/blockdevice/COMPONENT_SPIF/SPIFBlockDevice.h Wed Mar 13 11:03:24 2019 +0000 @@ -0,0 +1,300 @@ +/* mbed Microcontroller Library + * Copyright (c) 2018 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_SPIF_BLOCK_DEVICE_H +#define MBED_SPIF_BLOCK_DEVICE_H + +#include "SPI.h" +#include "DigitalOut.h" +#include "BlockDevice.h" + +/** Enum spif standard error codes + * + * @enum spif_bd_error + */ +enum spif_bd_error { + SPIF_BD_ERROR_OK = 0, /*!< no error */ + SPIF_BD_ERROR_DEVICE_ERROR = BD_ERROR_DEVICE_ERROR, /*!< device specific error -4001 */ + SPIF_BD_ERROR_PARSING_FAILED = -4002, /* SFDP Parsing failed */ + SPIF_BD_ERROR_READY_FAILED = -4003, /* Wait for Mem Ready failed */ + SPIF_BD_ERROR_WREN_FAILED = -4004, /* Write Enable Failed */ + SPIF_BD_ERROR_INVALID_ERASE_PARAMS = -4005, /* Erase command not on sector aligned addresses or exceeds device size */ +}; + + +#define SPIF_MAX_REGIONS 10 +#define MAX_NUM_OF_ERASE_TYPES 4 + +/** BlockDevice for SFDP based flash devices over SPI bus + * + * @code + * // Here's an example using SPI flash device on K82F target + * #include "mbed.h" + * #include "SPIFBlockDevice.h" + * + * // Create flash device on SPI bus with PTE5 as chip select + * SPIFBlockDevice spif(PTE2, PTE4, PTE1, PTE5); + * + * int main() { + * printf("spif test\n"); + * + * // Initialize the SPI flash device and print the memory layout + * spif.init(); + * printf("spif size: %llu\n", spif.size()); + * printf("spif read size: %llu\n", spif.get_read_size()); + * printf("spif program size: %llu\n", spif.get_program_size()); + * printf("spif erase size: %llu\n", spif.get_erase_size()); + * + * // Write "Hello World!" to the first block + * char *buffer = (char*)malloc(spif.get_erase_size()); + * sprintf(buffer, "Hello World!\n"); + * spif.erase(0, spif.get_erase_size()); + * spif.program(buffer, 0, spif.get_erase_size()); + * + * // Read back what was stored + * spif.read(buffer, 0, spif.get_erase_size()); + * printf("%s", buffer); + * + * // Deinitialize the device + * spif.deinit(); + * } + * @endcode + */ +class SPIFBlockDevice : public BlockDevice { +public: + /** Creates a SPIFBlockDevice on a SPI bus specified by pins + * + * @param mosi SPI master out, slave in pin + * @param miso SPI master in, slave out pin + * @param sclk SPI clock pin + * @param csel SPI chip select pin + * @param freq Clock speed of the SPI bus (defaults to 40MHz) + */ + SPIFBlockDevice(PinName mosi, PinName miso, PinName sclk, PinName csel, int freq = 40000000); + + /** Initialize a block device + * + * @return SPIF_BD_ERROR_OK(0) - success + * SPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed + * SPIF_BD_ERROR_READY_FAILED - Waiting for Memory ready failed or timedout + * SPIF_BD_ERROR_PARSING_FAILED - unexpected format or values in one of the SFDP tables + */ + virtual int init(); + + /** Deinitialize a block device + * + * @return SPIF_BD_ERROR_OK(0) - success + */ + virtual int deinit(); + + /** Desctruct SPIFBlockDevie + */ + ~SPIFBlockDevice() + { + deinit(); + } + + /** Read blocks from a block device + * + * @param buffer Buffer to write blocks to + * @param addr Address of block to begin reading from + * @param size Size to read in bytes, must be a multiple of read block size + * @return SPIF_BD_ERROR_OK(0) - success + * SPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed + */ + virtual int read(void *buffer, bd_addr_t addr, bd_size_t size); + + /** Program blocks to a block device + * + * The blocks must have been erased prior to being programmed + * + * @param buffer Buffer of data to write to blocks + * @param addr Address of block to begin writing to + * @param size Size to write in bytes, must be a multiple of program block size + * @return SPIF_BD_ERROR_OK(0) - success + * SPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed + * SPIF_BD_ERROR_READY_FAILED - Waiting for Memory ready failed or timed out + * SPIF_BD_ERROR_WREN_FAILED - Write Enable failed + */ + virtual int program(const void *buffer, bd_addr_t addr, bd_size_t size); + + /** Erase blocks on a block device + * + * The state of an erased block is undefined until it has been programmed + * + * @param addr Address of block to begin erasing + * @param size Size to erase in bytes, must be a multiple of erase block size + * @return SPIF_BD_ERROR_OK(0) - success + * SPIF_BD_ERROR_DEVICE_ERROR - device driver transaction failed + * SPIF_BD_ERROR_READY_FAILED - Waiting for Memory ready failed or timed out + * SPIF_BD_ERROR_WREN_FAILED - Write Enable failed + * SPIF_BD_ERROR_INVALID_ERASE_PARAMS - Trying to erase unaligned address or size + */ + virtual int erase(bd_addr_t addr, bd_size_t size); + + /** Get the size of a readable block + * + * @return Size of a readable block in bytes + */ + virtual bd_size_t get_read_size() const; + + /** Get the size of a programable block + * + * @return Size of a programable block in bytes + * @note Must be a multiple of the read size + */ + virtual bd_size_t get_program_size() const; + + /** Get the size of a eraseable block + * + * @return Size of a eraseable block in bytes + * @note Must be a multiple of the program size + */ + virtual bd_size_t get_erase_size() const; + + /** Get the size of minimal eraseable sector size of given address + * + * @param addr Any address within block queried for erase sector size (can be any address within flash size offset) + * @return Size of minimal erase sector size, in given address region, in bytes + * @note Must be a multiple of the program size + */ + virtual bd_size_t get_erase_size(bd_addr_t addr); + + /** Get the value of storage byte after it was erased + * + * If get_erase_value returns a non-negative byte value, the underlying + * storage is set to that value when erased, and storage containing + * that value can be programmed without another erase. + * + * @return The value of storage when erased, or -1 if you can't + * rely on the value of erased storage + */ + virtual int get_erase_value() const; + + /** Get the total size of the underlying device + * + * @return Size of the underlying device in bytes + */ + virtual bd_size_t size() const; + +private: + + // Internal functions + + /****************************************/ + /* SFDP Detection and Parsing Functions */ + /****************************************/ + // Parse SFDP Headers and retrieve Basic Param and Sector Map Tables (if exist) + int _sfdp_parse_sfdp_headers(uint32_t &basic_table_addr, size_t &basic_table_size, + uint32_t §or_map_table_addr, size_t §or_map_table_size); + + // Parse and Detect required Basic Parameters from Table + int _sfdp_parse_basic_param_table(uint32_t basic_table_addr, size_t basic_table_size); + + // Parse and read information required by Regions Secotr Map + int _sfdp_parse_sector_map_table(uint32_t sector_map_table_addr, size_t sector_map_table_size); + + // Detect fastest read Bus mode supported by device + int _sfdp_detect_best_bus_read_mode(uint8_t *basic_param_table_ptr, int basic_param_table_size, int &read_inst); + + // Set Page size for program + unsigned int _sfdp_detect_page_size(uint8_t *basic_param_table_ptr, int basic_param_table_size); + + // Detect all supported erase types + int _sfdp_detect_erase_types_inst_and_size(uint8_t *basic_param_table_ptr, int basic_param_table_size, + int &erase4k_inst, + int *erase_type_inst_arr, unsigned int *erase_type_size_arr); + + /***********************/ + /* Utilities Functions */ + /***********************/ + // Find the region to which the given offset belong to + int _utils_find_addr_region(bd_size_t offset); + + // Iterate on all supported Erase Types of the Region to which the offset belong to. + // Iterates from highest type to lowest + int _utils_iterate_next_largest_erase_type(uint8_t &bitfield, int size, int offset, int boundry); + + /********************************/ + /* Calls to SPI Driver APIs */ + /********************************/ + // Send Program => Write command to Driver + spif_bd_error _spi_send_program_command(int prog_inst, const void *buffer, bd_addr_t addr, bd_size_t size); + + // Send Read command to Driver + //spif_bd_error _spi_send_read_command(uint8_t read_inst, void *buffer, bd_addr_t addr, bd_size_t size); + spif_bd_error _spi_send_read_command(int read_inst, uint8_t *buffer, bd_addr_t addr, bd_size_t size); + + // Send Erase Instruction using command_transfer command to Driver + spif_bd_error _spi_send_erase_command(int erase_inst, bd_addr_t addr, bd_size_t size); + + // Send Generic command_transfer command to Driver + spif_bd_error _spi_send_general_command(int instruction, bd_addr_t addr, char *tx_buffer, + size_t tx_length, char *rx_buffer, size_t rx_length); + + // Send set_frequency command to Driver + spif_bd_error _spi_set_frequency(int freq); + /********************************/ + + // Soft Reset Flash Memory + int _reset_flash_mem(); + + // Configure Write Enable in Status Register + int _set_write_enable(); + + // Wait on status register until write not-in-progress + bool _is_mem_ready(); + +private: + // Master side hardware + mbed::SPI _spi; + // Enable CS control (low/high) for SPI driver operatios + mbed::DigitalOut _cs; + + // Mutex is used to protect Flash device for some SPI Driver commands that must be done sequentially with no other commands in between + // e.g. (1)Set Write Enable, (2)Program, (3)Wait Memory Ready + static SingletonPtr<PlatformMutex> _mutex; + + // Command Instructions + int _read_instruction; + int _prog_instruction; + int _erase_instruction; + int _erase4k_inst; // Legacy 4K erase instruction (default 0x20h) + + // Up To 4 Erase Types are supported by SFDP (each with its own command Instruction and Size) + int _erase_type_inst_arr[MAX_NUM_OF_ERASE_TYPES]; + unsigned int _erase_type_size_arr[MAX_NUM_OF_ERASE_TYPES]; + + // Sector Regions Map + int _regions_count; //number of regions + int _region_size_bytes[SPIF_MAX_REGIONS]; //regions size in bytes + bd_size_t _region_high_boundary[SPIF_MAX_REGIONS]; //region high address offset boundary + //Each Region can support a bit combination of any of the 4 Erase Types + uint8_t _region_erase_types_bitfield[SPIF_MAX_REGIONS]; + unsigned int _min_common_erase_size; // minimal common erase size for all regions (0 if none exists) + + unsigned int _page_size_bytes; // Page size - 256 Bytes default + bd_size_t _device_size_bytes; + + // Bus configuration + unsigned int _address_size; // number of bytes for address + unsigned int _read_dummy_and_mode_cycles; // Number of Dummy and Mode Bits required by Read Bus Mode + unsigned int _write_dummy_and_mode_cycles; // Number of Dummy and Mode Bits required by Write Bus Mode + unsigned int _dummy_and_mode_cycles; // Number of Dummy and Mode Bits required by Current Bus Mode + uint32_t _init_ref_count; + bool _is_initialized; +}; + +#endif /* MBED_SPIF_BLOCK_DEVICE_H */