Diff: features/storage/blockdevice/SlicingBlockDevice.h
- Revision:
- 0:38ceb79fef03
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/features/storage/blockdevice/SlicingBlockDevice.h Wed Nov 28 15:10:15 2018 +0000
@@ -0,0 +1,170 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2017 ARM Limited
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef MBED_SLICING_BLOCK_DEVICE_H
+#define MBED_SLICING_BLOCK_DEVICE_H
+
+#include "BlockDevice.h"
+#include "platform/mbed_assert.h"
+
+/** Block device for mapping to a slice of another block device
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "HeapBlockDevice.h"
+ * #include "SlicingBlockDevice.h"
+ *
+ * // Create a block device with 64 blocks of size 512
+ * HeapBlockDevice mem(64*512, 512);
+ *
+ * // Create a block device that maps to the first 32 blocks
+ * SlicingBlockDevice slice1(&mem, 0*512, 32*512);
+ *
+ * // Create a block device that maps to the last 32 blocks
+ * SlicingBlockDevice slice2(&mem, 32*512);
+ *
+ * // Create a block device that maps to the middle 32 blocks
+ * SlicingBlockDevice slice3(&mem, 16*512, -16*512);
+ * @endcode
+ */
+class SlicingBlockDevice : public BlockDevice
+{
+public:
+ /** Lifetime of the memory block device
+ *
+ * @param bd Block device to back the SlicingBlockDevice
+ * @param start Start block address to map to block 0, negative addresses
+ * are calculated from the end of the underlying block device
+ * @param end End block address to mark the end of the block device,
+ * this block is not mapped, negative addresses are
+ * calculated from the end of the underlying block device.
+ * The default stops at end of the underlying block device.
+ */
+ SlicingBlockDevice(BlockDevice *bd, bd_addr_t start, bd_addr_t end = 0);
+
+ /** Lifetime of a block device
+ */
+ virtual ~SlicingBlockDevice() {};
+
+ /** Initialize a block device
+ *
+ * @return 0 on success or a negative error code on failure
+ */
+ virtual int init();
+
+ /** Deinitialize a block device
+ *
+ * @return 0 on success or a negative error code on failure
+ */
+ virtual int deinit();
+
+ /** Ensure data on storage is in sync with the driver
+ *
+ * @return 0 on success or a negative error code on failure
+ */
+ virtual int sync();
+
+ /** Read blocks from a block device
+ *
+ * @param buffer Buffer to read blocks into
+ * @param addr Address of block to begin reading from
+ * @param size Size to read in bytes, must be a multiple of read block size
+ * @return 0 on success, negative error code on failure
+ */
+ virtual int read(void *buffer, bd_addr_t addr, bd_size_t size);
+
+ /** Program blocks to a block device
+ *
+ * The blocks must have been erased prior to being programmed
+ *
+ * @param buffer Buffer of data to write to blocks
+ * @param addr Address of block to begin writing to
+ * @param size Size to write in bytes, must be a multiple of program block size
+ * @return 0 on success, negative error code on failure
+ */
+ virtual int program(const void *buffer, bd_addr_t addr, bd_size_t size);
+
+ /** Erase blocks on a block device
+ *
+ * The state of an erased block is undefined until it has been programmed,
+ * unless get_erase_value returns a non-negative byte value
+ *
+ * @param addr Address of block to begin erasing
+ * @param size Size to erase in bytes, must be a multiple of erase block size
+ * @return 0 on success, negative error code on failure
+ */
+ virtual int erase(bd_addr_t addr, bd_size_t size);
+
+ /** Get the size of a readable block
+ *
+ * @return Size of a readable block in bytes
+ */
+ virtual bd_size_t get_read_size() const;
+
+ /** Get the size of a programmable block
+ *
+ * @return Size of a programmable block in bytes
+ * @note Must be a multiple of the read size
+ */
+ virtual bd_size_t get_program_size() const;
+
+ /** Get the size of an erasable block
+ *
+ * @return Size of an erasable block in bytes
+ * @note Must be a multiple of the program size
+ */
+ virtual bd_size_t get_erase_size() const;
+
+ /** Get the size of an erasable block given address
+ *
+ * @param addr Address within the erasable block
+ * @return Size of an erasable block in bytes
+ * @note Must be a multiple of the program size
+ */
+ virtual bd_size_t get_erase_size(bd_addr_t addr) const;
+
+ /** Get the value of storage when erased
+ *
+ * If get_erase_value returns a non-negative byte value, the underlying
+ * storage is set to that value when erased, and storage containing
+ * that value can be programmed without another erase.
+ *
+ * @return The value of storage when erased, or -1 if you can't
+ * rely on the value of erased storage
+ */
+ virtual int get_erase_value() const;
+
+ /** Get the total size of the underlying device
+ *
+ * @return Size of the underlying device in bytes
+ */
+ virtual bd_size_t size() const;
+
+protected:
+ BlockDevice *_bd;
+ bool _start_from_end;
+ bd_size_t _start;
+ bool _stop_from_end;
+ bd_size_t _stop;
+};
+
+
+#endif