Diff: features/storage/blockdevice/FlashSimBlockDevice.h

Revision:

0:38ceb79fef03

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/features/storage/blockdevice/FlashSimBlockDevice.h	Wed Nov 28 15:10:15 2018 +0000
@@ -0,0 +1,142 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2018 ARM Limited
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef MBED_FLASH_SIM_BLOCK_DEVICE_H
+#define MBED_FLASH_SIM_BLOCK_DEVICE_H
+
+#include "BlockDevice.h"
+
+enum {
+    BD_ERROR_NOT_ERASED       = -3201,
+};
+
+/** Flash simulating block device
+ *
+ * Flash simulation BD adaptor
+ *
+ */
+class FlashSimBlockDevice : public BlockDevice {
+public:
+
+    /** Constructor
+     *
+     * @param bd           Block device to back the FlashSimBlockDevice
+     * @param erase_value  Value stored in a block after it's erased
+     */
+    FlashSimBlockDevice(BlockDevice *bd, uint8_t erase_value = 0xFF);
+    virtual ~FlashSimBlockDevice();
+
+    /** Initialize a block device
+     *
+     *  @return         0 on success or a negative error code on failure
+     */
+    virtual int init();
+
+    /** Deinitialize the block device
+     *
+     *  @return         0 on success or a negative error code on failure
+     */
+    virtual int deinit();
+
+    /** Ensure data on storage is in sync with the driver
+     *
+     *  @return         0 on success or a negative error code on failure
+     */
+    virtual int sync();
+
+    /** Read blocks from the block device
+     *
+     *  @param buffer   Buffer to read blocks into
+     *  @param addr     Address of block to begin reading from
+     *  @param size     Size to read in bytes, must be a multiple of read block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int read(void *buffer, bd_addr_t addr, bd_size_t size);
+
+    /** Program blocks to the block device
+     *
+     *  The blocks must have been erased prior to being programmed
+     *
+     *  @param buffer   Buffer of data to write to blocks
+     *  @param addr     Address of block to begin writing to
+     *  @param size     Size to write in bytes, must be a multiple of program block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int program(const void *buffer, bd_addr_t addr, bd_size_t size);
+
+    /** Erase blocks on the block device
+     *
+     *  Required before any write to these addresses
+     *
+     *  @param addr     Address of block to begin erasing
+     *  @param size     Size to erase in bytes, must be a multiple of erase block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int erase(bd_addr_t addr, bd_size_t size);
+
+    /** Get the size of a readable block
+     *
+     *  @return         Size of a readable block in bytes
+     */
+    virtual bd_size_t get_read_size() const;
+
+    /** Get the size of a programmable block
+     *
+     *  @return         Size of a programmable block in bytes
+     */
+    virtual bd_size_t get_program_size() const;
+
+    /** Get the size of an erasable block
+     *
+     *  @return         Size of an erasable block in bytes
+     */
+    virtual bd_size_t get_erase_size() const;
+
+    /** Get the size of an erasable block given address
+     *
+     *  @param addr     Address within the erasable block
+     *  @return         Size of an erasable block in bytes
+     *  @note Must be a multiple of the program size
+     */
+    virtual bd_size_t get_erase_size(bd_addr_t addr) const;
+
+    /** Get the value of storage when erased
+     *
+     *  @return         The value of storage when erased
+     */
+    virtual int get_erase_value() const;
+
+    /** Get the total size of the underlying device
+     *
+     *  @return         Size of the underlying device in bytes
+     */
+    virtual bd_size_t size() const;
+
+private:
+    uint8_t _erase_value;
+    bd_size_t _blank_buf_size;
+    uint8_t *_blank_buf;
+    BlockDevice *_bd;
+    uint32_t _init_ref_count;
+    bool _is_initialized;
+};
+
+#endif