Diff: source/bluetooth/MicroBitUARTService.cpp

Revision:

1:8aa5cdb4ab67

Child:

3:d86a4ddc1867

diff -r fb15f7887843 -r 8aa5cdb4ab67 source/bluetooth/MicroBitUARTService.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/bluetooth/MicroBitUARTService.cpp	Thu Apr 07 01:33:22 2016 +0100
@@ -0,0 +1,539 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 British Broadcasting Corporation.
+This software is provided by Lancaster University by arrangement with the BBC.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+*/
+
+/**
+  * Class definition for the custom MicroBit UART Service.
+  * Provides a BLE service that acts as a UART port, enabling the reception and transmission
+  * of an arbitrary number of bytes.
+  */
+
+#include "ble/UUID.h"
+
+#include "ExternalEvents.h"
+#include "MicroBitUARTService.h"
+#include "MicroBitFiber.h"
+#include "ErrorNo.h"
+#include "NotifyEvents.h"
+
+static uint8_t txBufferHead = 0;
+static uint8_t txBufferTail = 0;
+
+static GattCharacteristic* rxCharacteristic = NULL;
+
+/**
+  * A callback function for whenever a Bluetooth device consumes our RX Buffer
+  */
+void on_confirmation_received_callback(uint16_t handle)
+{
+#if CONFIG_ENABLED(MICROBIT_DBG)
+    SERIAL_DEBUG->printf("RECEIVED!! %d \r\n",handle);
+#endif
+    if(handle == rxCharacteristic->getValueAttribute().getHandle())
+    {
+        txBufferTail = txBufferHead;
+        MicroBitEvent(MICROBIT_ID_NOTIFY, MICROBIT_UART_S_EVT_TX_EMPTY);
+    }
+}
+
+/**
+ * Constructor for the UARTService.
+ * @param _ble an instance of BLEDevice
+ * @param rxBufferSize the size of the rxBuffer
+ * @param txBufferSize the size of the txBuffer
+ *
+ * @note defaults to 20
+ */
+MicroBitUARTService::MicroBitUARTService(BLEDevice &_ble, uint8_t rxBufferSize, uint8_t txBufferSize) : ble(_ble)
+{
+
+    txBuffer = (uint8_t *)malloc(txBufferSize);
+    rxBuffer = (uint8_t *)malloc(rxBufferSize);
+
+    rxBufferHead = 0;
+    rxBufferTail = 0;
+    this->rxBufferSize = rxBufferSize;
+
+    txBufferHead = 0;
+    txBufferTail = 0;
+    this->txBufferSize = txBufferSize;
+
+    GattCharacteristic txCharacteristic(UARTServiceTXCharacteristicUUID, rxBuffer, 1, rxBufferSize, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE);
+
+    rxCharacteristic = new GattCharacteristic(UARTServiceRXCharacteristicUUID, txBuffer, 1, txBufferSize, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE);
+
+    GattCharacteristic *charTable[] = {&txCharacteristic, rxCharacteristic};
+
+    GattService uartService(UARTServiceUUID, charTable, sizeof(charTable) / sizeof(GattCharacteristic *));
+
+    _ble.addService(uartService);
+
+    this->txCharacteristicHandle = txCharacteristic.getValueAttribute().getHandle();
+
+    _ble.gattServer().onDataWritten(this, &MicroBitUARTService::onDataWritten);
+    _ble.gattServer().onConfirmationReceived(on_confirmation_received_callback);
+}
+
+/**
+  * A callback function for whenever a Bluetooth device writes to our TX characteristic.
+  */
+void MicroBitUARTService::onDataWritten(const GattWriteCallbackParams *params) {
+    if (params->handle == this->txCharacteristicHandle)
+    {
+        uint16_t bytesWritten = params->len;
+
+        for(int byteIterator = 0; byteIterator <  bytesWritten; byteIterator++)
+        {
+            int newHead = (rxBufferHead + 1) % rxBufferSize;
+
+            if(newHead != rxBufferTail)
+            {
+                char c = params->data[byteIterator];
+
+                int delimeterOffset = 0;
+                int delimLength = this->delimeters.length();
+
+                //iterate through our delimeters (if any) to see if there is a match
+                while(delimeterOffset < delimLength)
+                {
+                    //fire an event if there is to block any waiting fibers
+                    if(this->delimeters.charAt(delimeterOffset) == c)
+                        MicroBitEvent(MICROBIT_ID_BLE_UART, MICROBIT_UART_S_EVT_DELIM_MATCH);
+
+                    delimeterOffset++;
+                }
+
+                rxBuffer[rxBufferHead] = c;
+
+                rxBufferHead = newHead;
+
+                if(rxBufferHead == rxBuffHeadMatch)
+                {
+                    rxBuffHeadMatch = -1;
+                    MicroBitEvent(MICROBIT_ID_BLE_UART, MICROBIT_UART_S_EVT_HEAD_MATCH);
+                }
+            }
+            else
+                MicroBitEvent(MICROBIT_ID_BLE_UART, MICROBIT_UART_S_EVT_RX_FULL);
+        }
+    }
+}
+
+/**
+  * An internal method that copies values from a circular buffer to a linear buffer.
+  *
+  * @param circularBuff a pointer to the source circular buffer
+  * @param circularBuffSize the size of the circular buffer
+  * @param linearBuff a pointer to the destination linear buffer
+  * @param tailPosition the tail position in the circular buffer you want to copy from
+  * @param headPosition the head position in the circular buffer you want to copy to
+  *
+  * @note this method assumes that the linear buffer has the appropriate amount of
+  *       memory to contain the copy operation
+  */
+void MicroBitUARTService::circularCopy(uint8_t *circularBuff, uint8_t circularBuffSize, uint8_t *linearBuff, uint16_t tailPosition, uint16_t headPosition)
+{
+    int toBuffIndex = 0;
+
+    while(tailPosition != headPosition)
+    {
+        linearBuff[toBuffIndex++] = circularBuff[tailPosition];
+
+        tailPosition = (tailPosition + 1) % circularBuffSize;
+    }
+}
+
+/**
+  * Retreives a single character from our RxBuffer.
+  *
+  * @param mode the selected mode, one of: ASYNC, SYNC_SPINWAIT, SYNC_SLEEP. Each mode
+  *        gives a different behaviour:
+  *
+  *            ASYNC - Will attempt to read a single character, and return immediately
+  *
+  *            SYNC_SPINWAIT - will return MICROBIT_INVALID_PARAMETER
+  *
+  *            SYNC_SLEEP - Will configure the event and block the current fiber until the
+  *                         event is received.
+  *
+  * @return MICROBIT_INVALID_PARAMETER if the mode given is SYNC_SPINWAIT, a character or MICROBIT_NO_DATA
+  */
+int MicroBitUARTService::getc(MicroBitSerialMode mode)
+{
+    if(mode == SYNC_SPINWAIT)
+        return MICROBIT_INVALID_PARAMETER;
+
+    if(mode == ASYNC)
+    {
+        if(!isReadable())
+            return MICROBIT_NO_DATA;
+    }
+
+    if(mode == SYNC_SLEEP)
+    {
+        if(!isReadable())
+            eventAfter(1, mode);
+    }
+
+    char c = rxBuffer[rxBufferTail];
+
+    rxBufferTail = (rxBufferTail + 1) % rxBufferSize;
+
+    return c;
+}
+
+/**
+  * places a single character into our transmission buffer,
+  *
+  * @param c the character to transmit
+  *
+  * @return the number of characters written (0, or 1).
+  */
+int MicroBitUARTService::putc(char c)
+{
+    return (send((uint8_t *)&c, 1) == 1) ? 1 : EOF;
+}
+
+/**
+  * Copies characters into the buffer used for Transmitting to the central device.
+  *
+  * @param buf a buffer containing length number of bytes.
+  * @param length the size of the buffer.
+  *
+  * @return the number of characters copied into the buffer
+  *
+  * @note no modes for sending are available at the moment, due to interrupt overhead.
+  */
+int MicroBitUARTService::send(const uint8_t *buf, int length)
+{
+    if(length < 1)
+        return MICROBIT_INVALID_PARAMETER;
+
+    int bytesWritten = 0;
+
+    if (ble.getGapState().connected) {
+
+        for(int bufferIterator = 0; bufferIterator < length; bufferIterator++)
+        {
+            int nextHead = (txBufferHead + 1) % txBufferSize;
+
+            if(nextHead != txBufferTail)
+            {
+                txBuffer[txBufferHead] = buf[bufferIterator];
+
+                txBufferHead = nextHead;
+
+                bytesWritten++;
+            }
+        }
+
+        int size = txBufferedSize();
+
+#if CONFIG_ENABLED(MICROBIT_DBG)
+        SERIAL_DEBUG->printf("tx size: %d", size);
+#endif
+
+        uint8_t temp[size] = { 0 };
+
+        circularCopy(txBuffer, txBufferSize, temp, txBufferTail, txBufferHead);
+
+#if CONFIG_ENABLED(MICROBIT_DBG)
+        for(int i = 0; i < size; i++)
+            SERIAL_DEBUG->printf("%c",temp[i]);
+#endif
+
+        ble.gattServer().write(rxCharacteristic->getValueAttribute().getHandle(), temp, size);
+    }
+
+#if CONFIG_ENABLED(MICROBIT_DBG)
+    SERIAL_DEBUG->printf("written: %d \r\n",bytesWritten);
+#endif
+
+    return bytesWritten;
+}
+
+/**
+  * Copies characters into the buffer used for Transmitting to the central device.
+  *
+  * @param s the string to transmit
+  *
+  * @return the number of characters copied into the buffer
+  *
+  * @note no modes for sending are available at the moment, due to interrupt overhead.
+  */
+int MicroBitUARTService::send(ManagedString s)
+{
+    return send((uint8_t *)s.toCharArray(), s.length());
+}
+
+/**
+  * Reads a number of characters from the rxBuffer and fills user given buffer.
+  *
+  * @param buf a pointer to a buffer of len bytes.
+  * @param len the size of the user allocated buffer
+  * @param mode the selected mode, one of: ASYNC, SYNC_SPINWAIT, SYNC_SLEEP. Each mode
+  *        gives a different behaviour:
+  *
+  *            ASYNC - Will attempt to read all available characters, and return immediately
+  *                    until the buffer limit is reached
+  *
+  *            SYNC_SPINWAIT - will return MICROBIT_INVALID_PARAMETER
+  *
+  *            SYNC_SLEEP - Will first of all determine whether the given number of characters
+  *                         are available in our buffer, if not, it will set an event and sleep
+  *                         until the number of characters are avaialable.
+  *
+  * @return the number of characters digested
+  */
+int MicroBitUARTService::read(uint8_t *buf, int len, MicroBitSerialMode mode)
+{
+    if(mode == SYNC_SPINWAIT)
+        return MICROBIT_INVALID_PARAMETER;
+
+    int i = 0;
+
+    if(mode == ASYNC)
+    {
+        int c;
+
+        while((c = getc(mode)) > 0 && i < len)
+        {
+            buf[i] = c;
+            i++;
+        }
+    }
+
+    if(mode == SYNC_SLEEP)
+    {
+        if(len > rxBufferedSize())
+            eventAfter(len - rxBufferedSize(), mode);
+
+        while(i < len)
+        {
+            buf[i] = (char)getc(mode);
+            i++;
+        }
+    }
+
+    return i;
+}
+
+/**
+  * Reads a number of characters from the rxBuffer and returns them as a ManagedString
+  *
+  * @param len the number of characters to read.
+  * @param mode the selected mode, one of: ASYNC, SYNC_SPINWAIT, SYNC_SLEEP. Each mode
+  *        gives a different behaviour:
+  *
+  *            ASYNC - Will attempt to read all available characters, and return immediately
+  *                    until the buffer limit is reached
+  *
+  *            SYNC_SPINWAIT - will return MICROBIT_INVALID_PARAMETER
+  *
+  *            SYNC_SLEEP - Will first of all determine whether the given number of characters
+  *                         are available in our buffer, if not, it will set an event and sleep
+  *                         until the number of characters are avaialable.
+  *
+  * @return an empty ManagedString on error, or a ManagedString containing characters
+  */
+ManagedString MicroBitUARTService::read(int len, MicroBitSerialMode mode)
+{
+    uint8_t buf[len + 1] = { 0 };
+
+    int ret = read(buf, len, mode);
+
+    if(ret < 1)
+        return ManagedString();
+
+    return ManagedString((const char *)buf);
+}
+
+/**
+  * Reads characters until a character matches one of the given delimeters
+  *
+  * @param delimeters the number of characters to match against
+  * @param mode the selected mode, one of: ASYNC, SYNC_SPINWAIT, SYNC_SLEEP. Each mode
+  *        gives a different behaviour:
+  *
+  *            ASYNC - Will attempt read the immediate buffer, and look for a match.
+  *                    If there isn't, an empty ManagedString will be returned.
+  *
+  *            SYNC_SPINWAIT - will return MICROBIT_INVALID_PARAMETER
+  *
+  *            SYNC_SLEEP - Will first of all consider the characters in the immediate buffer,
+  *                         if a match is not found, it will block on an event, fired when a
+  *                         character is matched.
+  *
+  * @return an empty ManagedString on error, or a ManagedString containing characters
+  */
+ManagedString MicroBitUARTService::readUntil(ManagedString delimeters, MicroBitSerialMode mode)
+{
+    if(mode == SYNC_SPINWAIT)
+        return MICROBIT_INVALID_PARAMETER;
+
+    int localTail = rxBufferTail;
+    int preservedTail = rxBufferTail;
+
+    int foundIndex = -1;
+
+    //ASYNC mode just iterates through our stored characters checking for any matches.
+    while(localTail != rxBufferHead && foundIndex  == -1)
+    {
+        //we use localTail to prevent modification of the actual tail.
+        char c = rxBuffer[localTail];
+
+        for(int delimeterIterator = 0; delimeterIterator < delimeters.length(); delimeterIterator++)
+            if(delimeters.charAt(delimeterIterator) == c)
+                foundIndex = localTail;
+
+        localTail = (localTail + 1) % rxBufferSize;
+    }
+
+    //if our mode is SYNC_SLEEP, we set up an event to be fired when we see a
+    //matching character.
+    if(mode == SYNC_SLEEP && foundIndex == -1)
+    {
+        eventOn(delimeters, mode);
+
+        foundIndex = rxBufferHead - 1;
+
+        this->delimeters = ManagedString();
+    }
+
+    if(foundIndex >= 0)
+    {
+        //calculate our local buffer size
+        int localBuffSize = (preservedTail > foundIndex) ? (rxBufferSize - preservedTail) + foundIndex : foundIndex - preservedTail;
+
+        uint8_t localBuff[localBuffSize + 1] = { 0 };
+
+        circularCopy(rxBuffer, rxBufferSize, localBuff, preservedTail, foundIndex);
+
+        //plus one for the character we listened for...
+        rxBufferTail = (rxBufferTail + localBuffSize + 1) % rxBufferSize;
+
+        return ManagedString((char *)localBuff, localBuffSize);
+    }
+
+    return ManagedString();
+}
+
+/**
+  * Configures an event to be fired on a match with one of the delimeters.
+  *
+  * @param delimeters the characters to match received characters against e.g. ManagedString("\r\n")
+  * @param mode the selected mode, one of: ASYNC, SYNC_SPINWAIT, SYNC_SLEEP. Each mode
+  *        gives a different behaviour:
+  *
+  *            ASYNC - Will configure the event and return immediately.
+  *
+  *            SYNC_SPINWAIT - will return MICROBIT_INVALID_PARAMETER
+  *
+  *            SYNC_SLEEP - Will configure the event and block the current fiber until the
+  *                         event is received.
+  *
+  * @return MICROBIT_INVALID_PARAMETER if the mode given is SYNC_SPINWAIT, otherwise MICROBIT_OK.
+  *
+  * @note delimeters are matched on a per byte basis.
+  */
+int MicroBitUARTService::eventOn(ManagedString delimeters, MicroBitSerialMode mode)
+{
+    if(mode == SYNC_SPINWAIT)
+        return MICROBIT_INVALID_PARAMETER;
+
+    //configure our head match...
+    this->delimeters = delimeters;
+
+    //block!
+    if(mode == SYNC_SLEEP)
+        fiber_wait_for_event(MICROBIT_ID_BLE_UART, MICROBIT_UART_S_EVT_DELIM_MATCH);
+
+    return MICROBIT_OK;
+}
+
+/**
+  * Configures an event to be fired after "len" characters.
+  *
+  * @param len the number of characters to wait before triggering the event
+  * @param mode the selected mode, one of: ASYNC, SYNC_SPINWAIT, SYNC_SLEEP. Each mode
+  *        gives a different behaviour:
+  *
+  *            ASYNC - Will configure the event and return immediately.
+  *
+  *            SYNC_SPINWAIT - will return MICROBIT_INVALID_PARAMETER
+  *
+  *            SYNC_SLEEP - Will configure the event and block the current fiber until the
+  *                         event is received.
+  *
+  * @return MICROBIT_INVALID_PARAMETER if the mode given is SYNC_SPINWAIT, otherwise MICROBIT_OK.
+  */
+int MicroBitUARTService::eventAfter(int len, MicroBitSerialMode mode)
+{
+    if(mode == SYNC_SPINWAIT)
+        return MICROBIT_INVALID_PARAMETER;
+
+    //configure our head match...
+    this->rxBuffHeadMatch = (rxBufferHead + len) % rxBufferSize;
+
+    //block!
+    if(mode == SYNC_SLEEP)
+        fiber_wait_for_event(MICROBIT_ID_BLE_UART, MICROBIT_UART_S_EVT_HEAD_MATCH);
+
+    return MICROBIT_OK;
+}
+
+/**
+  * Determines if we have space in our rxBuff.
+  *
+  * @return 1 if we have space, 0 if we do not.
+  *
+  * @note the reason we do not wrap the super's readable() method is so that we
+  *       don't interfere with communities that use manual calls to uBit.serial.readable()
+  */
+int MicroBitUARTService::isReadable()
+{
+    return (rxBufferTail != rxBufferHead) ? 1 : 0;
+}
+
+/**
+  * @return The currently buffered number of bytes in our rxBuff.
+  */
+int MicroBitUARTService::rxBufferedSize()
+{
+    if(rxBufferTail > rxBufferHead)
+        return (rxBufferSize - rxBufferTail) + rxBufferHead;
+
+    return rxBufferHead - rxBufferTail;
+}
+
+/**
+  * @return The currently buffered number of bytes in our txBuff.
+  */
+int MicroBitUARTService::txBufferedSize()
+{
+    if(txBufferTail > txBufferHead)
+        return (txBufferSize - txBufferTail) + txBufferHead;
+
+    return txBufferHead - txBufferTail;
+}