Diff: source/bluetooth/MicroBitIOPinService.cpp

Revision:

1:8aa5cdb4ab67

diff -r fb15f7887843 -r 8aa5cdb4ab67 source/bluetooth/MicroBitIOPinService.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/bluetooth/MicroBitIOPinService.cpp	Thu Apr 07 01:33:22 2016 +0100
@@ -0,0 +1,330 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 British Broadcasting Corporation.
+This software is provided by Lancaster University by arrangement with the BBC.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+*/
+
+/**
+  * Class definition for the custom MicroBit IOPin Service.
+  * Provides a BLE service to remotely read the state of the I/O Pin, and configure its behaviour.
+  */
+#include "MicroBitConfig.h"
+#include "ble/UUID.h"
+
+#include "MicroBitIOPinService.h"
+#include "MicroBitFiber.h"
+
+/**
+  * Constructor.
+  * Create a representation of the IOPinService
+  * @param _ble The instance of a BLE device that we're running on.
+  * @param _io An instance of MicroBitIO that this service will use to perform
+  *            I/O operations.
+  */
+MicroBitIOPinService::MicroBitIOPinService(BLEDevice &_ble, MicroBitIO &_io) :
+        ble(_ble), io(_io)
+{
+    // Create the AD characteristic, that defines whether each pin is treated as analogue or digital
+    GattCharacteristic ioPinServiceADCharacteristic(MicroBitIOPinServiceADConfigurationUUID, (uint8_t *)&ioPinServiceADCharacteristicBuffer, 0, sizeof(ioPinServiceADCharacteristicBuffer), GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE);
+
+    // Create the IO characteristic, that defines whether each pin is treated as input or output
+    GattCharacteristic ioPinServiceIOCharacteristic(MicroBitIOPinServiceIOConfigurationUUID, (uint8_t *)&ioPinServiceIOCharacteristicBuffer, 0, sizeof(ioPinServiceIOCharacteristicBuffer), GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE);
+
+    // Create the Data characteristic, that allows the actual read and write operations.
+    ioPinServiceDataCharacteristic = new GattCharacteristic(MicroBitIOPinServiceDataUUID, (uint8_t *)ioPinServiceDataCharacteristicBuffer, 0, sizeof(ioPinServiceDataCharacteristicBuffer), GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY);
+
+    ioPinServiceDataCharacteristic->setReadAuthorizationCallback(this, &MicroBitIOPinService::onDataRead);
+
+    ioPinServiceADCharacteristicBuffer = 0;
+    ioPinServiceIOCharacteristicBuffer = 0;
+    memset(ioPinServiceIOData, 0, sizeof(ioPinServiceIOData));
+
+    // Set default security requirements
+    ioPinServiceADCharacteristic.requireSecurity(SecurityManager::MICROBIT_BLE_SECURITY_LEVEL);
+    ioPinServiceIOCharacteristic.requireSecurity(SecurityManager::MICROBIT_BLE_SECURITY_LEVEL);
+    ioPinServiceDataCharacteristic->requireSecurity(SecurityManager::MICROBIT_BLE_SECURITY_LEVEL);
+
+    GattCharacteristic *characteristics[] = {&ioPinServiceADCharacteristic, &ioPinServiceIOCharacteristic, ioPinServiceDataCharacteristic};
+    GattService         service(MicroBitIOPinServiceUUID, characteristics, sizeof(characteristics) / sizeof(GattCharacteristic *));
+
+    ble.addService(service);
+
+    ioPinServiceADCharacteristicHandle = ioPinServiceADCharacteristic.getValueHandle();
+    ioPinServiceIOCharacteristicHandle = ioPinServiceIOCharacteristic.getValueHandle();
+
+    ble.gattServer().write(ioPinServiceADCharacteristicHandle, (const uint8_t *)&ioPinServiceADCharacteristicBuffer, sizeof(ioPinServiceADCharacteristicBuffer));
+    ble.gattServer().write(ioPinServiceIOCharacteristicHandle, (const uint8_t *)&ioPinServiceIOCharacteristicBuffer, sizeof(ioPinServiceIOCharacteristicBuffer));
+
+    ble.onDataWritten(this, &MicroBitIOPinService::onDataWritten);
+    fiber_add_idle_component(this);
+}
+
+/**
+  * Determines if the given pin was configured as a digital pin by the BLE ADPinConfigurationCharacterisitic.
+  *
+  * @param i the enumeration of the pin to test
+  * @return 1 if this pin is configured as digital, 0 otherwise
+  */
+int MicroBitIOPinService::isDigital(int i)
+{
+    return ((ioPinServiceADCharacteristicBuffer & (1 << i)) == 0);
+}
+
+/**
+  * Determines if the given pin was configured as an analog pin by the BLE ADPinConfigurationCharacterisitic.
+  *
+  * @param i the enumeration of the pin to test
+  * @return 1 if this pin is configured as analog, 0 otherwise
+  */
+int MicroBitIOPinService::isAnalog(int i)
+{
+    return ((ioPinServiceADCharacteristicBuffer & (1 << i)) != 0);
+}
+
+/**
+  * Determines if the given pin was configured as an input by the BLE IOPinConfigurationCharacterisitic.
+  *
+  * @param i the enumeration of the pin to test
+  * @return 1 if this pin is configured as an input, 0 otherwise
+  */
+int MicroBitIOPinService::isInput(int i)
+{
+    return ((ioPinServiceIOCharacteristicBuffer & (1 << i)) != 0);
+}
+
+/**
+  * Determines if the given pin was configured as output by the BLE IOPinConfigurationCharacterisitic.
+  *
+  * @param i the enumeration of the pin to test
+  * @return 1 if this pin is configured as an output, 0 otherwise
+  */
+int MicroBitIOPinService::isOutput(int i)
+{
+    return ((ioPinServiceIOCharacteristicBuffer & (1 << i)) == 0);
+}
+
+/**
+  * Callback. Invoked when any of our attributes are written via BLE.
+  */
+void MicroBitIOPinService::onDataWritten(const GattWriteCallbackParams *params)
+{
+    // Check for writes to the IO configuration characteristic
+    if (params->handle == ioPinServiceIOCharacteristicHandle && params->len >= sizeof(ioPinServiceIOCharacteristicBuffer))
+    {
+        uint32_t *value = (uint32_t *)params->data;
+
+        // Our IO configuration may be changing... read the new value, and push it back into the BLE stack.
+        ioPinServiceIOCharacteristicBuffer = *value;
+        ble.gattServer().write(ioPinServiceIOCharacteristicHandle, (const uint8_t *)&ioPinServiceIOCharacteristicBuffer, sizeof(ioPinServiceIOCharacteristicBuffer));
+
+        // Also, drop any selected pins into input mode, so we can pick up changes later
+        for (int i=0; i < MICROBIT_IO_PIN_SERVICE_PINCOUNT; i++)
+        {
+            if(isDigital(i) && isInput(i))
+               io.pin[i].getDigitalValue();
+               //MicroBitIOPins[i]->getDigitalValue();
+
+            if(isAnalog(i) && isInput(i))
+               io.pin[i].getAnalogValue();
+               //MicroBitIOPins[i]->getAnalogValue();
+        }
+    }
+
+    // Check for writes to the IO configuration characteristic
+    if (params->handle == ioPinServiceADCharacteristicHandle && params->len >= sizeof(ioPinServiceADCharacteristicBuffer))
+    {
+        uint32_t *value = (uint32_t *)params->data;
+
+        // Our IO configuration may be changing... read the new value, and push it back into the BLE stack.
+        ioPinServiceADCharacteristicBuffer = *value;
+        ble.gattServer().write(ioPinServiceADCharacteristicHandle, (const uint8_t *)&ioPinServiceADCharacteristicBuffer, sizeof(ioPinServiceADCharacteristicBuffer));
+
+        // Also, drop any selected pins into input mode, so we can pick up changes later
+        for (int i=0; i < MICROBIT_IO_PIN_SERVICE_PINCOUNT; i++)
+        {
+            if(isDigital(i) && isInput(i))
+               io.pin[i].getDigitalValue();
+               //MicroBitIOPins[i]->getDigitalValue();
+
+            if(isAnalog(i) && isInput(i))
+               io.pin[i].getAnalogValue();
+               //MicroBitIOPins[i]->getAnalogValue();
+        }
+    }
+
+    if (params->handle == ioPinServiceDataCharacteristic->getValueHandle())
+    {
+        // We have some pin data to change...
+        uint16_t len = params->len;
+        IOData *data = (IOData *)params->data;
+
+        // There may be multiple write operaitons... take each in turn and update the pin values
+        while (len >= sizeof(IOData))
+        {
+            if (isOutput(data->pin))
+            {
+                if (isDigital(data->pin))
+               		io.pin[data->pin].setDigitalValue(data->value);
+                    //MicroBitIOPins[data->pin]->setDigitalValue(data->value);
+                else
+               		io.pin[data->pin].setAnalogValue(data->value*4);
+                    //MicroBitIOPins[data->pin]->setAnalogValue(data->value*4);
+            }
+
+            data++;
+            len -= sizeof(IOData);
+        }
+    }
+}
+
+/**
+ * Callback. invoked when the BLE data characteristic is read.
+ *
+ * Reads all the pins marked as inputs, and updates the data stored in the characteristic.
+ */
+void MicroBitIOPinService::onDataRead(GattReadAuthCallbackParams *params)
+{
+    if (params->handle == ioPinServiceDataCharacteristic->getValueHandle())
+    {
+
+        // Scan through all pins that our BLE client may be listening for. If any have changed value, update the BLE characterisitc, and NOTIFY our client.
+        int pairs = 0;
+
+        for (int i=0; i < MICROBIT_IO_PIN_SERVICE_PINCOUNT; i++)
+        {
+            if (isInput(i))
+            {
+                uint8_t value;
+
+                if (isDigital(i))
+               		value = io.pin[i].getDigitalValue();
+                    //value = MicroBitIOPins[i]->getDigitalValue();
+                else
+               		value = io.pin[i].getAnalogValue();
+                    //value = MicroBitIOPins[i]->getAnalogValue();
+
+                ioPinServiceIOData[i] = value;
+                ioPinServiceDataCharacteristicBuffer[pairs].pin = i;
+                ioPinServiceDataCharacteristicBuffer[pairs].value = value;
+
+                pairs++;
+
+                if (pairs >= MICROBIT_IO_PIN_SERVICE_DATA_SIZE)
+                    break;
+            }
+        }
+
+        // If there's any data, issue a BLE notification.
+        if (pairs > 0)
+            ble.gattServer().notify(ioPinServiceDataCharacteristic->getValueHandle(), (uint8_t *)ioPinServiceDataCharacteristicBuffer, pairs * sizeof(IOData));
+    }
+}
+
+
+/**
+ * Periodic callback from MicroBit scheduler.
+ *
+ * Check if any of the pins we're watching need updating. Notify any connected
+ * device with any changes.
+ */
+void MicroBitIOPinService::idleTick()
+{
+    // If we're not we're connected, then there's nothing to do...
+    if (!ble.getGapState().connected)
+        return;
+
+    // Scan through all pins that our BLE client may be listening for. If any have changed value, update the BLE characterisitc, and NOTIFY our client.
+    int pairs = 0;
+
+    for (int i=0; i < MICROBIT_IO_PIN_SERVICE_PINCOUNT; i++)
+    {
+        if (isInput(i))
+        {
+            uint8_t value;
+
+            if (isDigital(i))
+               	value = io.pin[i].getDigitalValue();
+                //value = MicroBitIOPins[i]->getDigitalValue();
+            else
+               	value = io.pin[i].getAnalogValue();
+                //value = MicroBitIOPins[i]->getAnalogValue();
+
+            // If the data has changed, send an update.
+            if (value != ioPinServiceIOData[i])
+            {
+                ioPinServiceIOData[i] = value;
+
+                ioPinServiceDataCharacteristicBuffer[pairs].pin = i;
+                ioPinServiceDataCharacteristicBuffer[pairs].value = value;
+
+                pairs++;
+
+                if (pairs >= MICROBIT_IO_PIN_SERVICE_DATA_SIZE)
+                    break;
+            }
+        }
+    }
+
+    // If there were any changes, issue a BLE notification.
+    if (pairs > 0)
+        ble.gattServer().notify(ioPinServiceDataCharacteristic->getValueHandle(), (uint8_t *)ioPinServiceDataCharacteristicBuffer, pairs * sizeof(IOData));
+}
+
+const uint8_t  MicroBitIOPinServiceUUID[] = {
+    0xe9,0x5d,0x12,0x7b,0x25,0x1d,0x47,0x0a,0xa0,0x62,0xfa,0x19,0x22,0xdf,0xa9,0xa8
+};
+
+const uint8_t  MicroBitIOPinServiceIOConfigurationUUID[] = {
+    0xe9,0x5d,0xb9,0xfe,0x25,0x1d,0x47,0x0a,0xa0,0x62,0xfa,0x19,0x22,0xdf,0xa9,0xa8
+};
+
+const uint8_t  MicroBitIOPinServiceADConfigurationUUID[] = {
+    0xe9,0x5d,0x58,0x99,0x25,0x1d,0x47,0x0a,0xa0,0x62,0xfa,0x19,0x22,0xdf,0xa9,0xa8
+};
+
+const uint8_t MicroBitIOPinServiceDataUUID[] = {
+    0xe9,0x5d,0x8d,0x00,0x25,0x1d,0x47,0x0a,0xa0,0x62,0xfa,0x19,0x22,0xdf,0xa9,0xa8
+};
+
+/*
+MicroBitPin * const MicroBitIOPins[] = {
+    &uBit.io.P0,
+    &uBit.io.P1,
+    &uBit.io.P2,
+    &uBit.io.P3,
+    &uBit.io.P4,
+    &uBit.io.P5,
+    &uBit.io.P6,
+    &uBit.io.P7,
+    &uBit.io.P8,
+    &uBit.io.P9,
+    &uBit.io.P10,
+    &uBit.io.P11,
+    &uBit.io.P12,
+    &uBit.io.P13,
+    &uBit.io.P14,
+    &uBit.io.P15,
+    &uBit.io.P16,
+    &uBit.io.P19,
+    &uBit.io.P20
+};
+*/