hadif azli / Mbed 2 deprecated TEST123

Dependencies:   mbed Blynk

Revision:
2:6cd3b0947188
Parent:
1:0e75de2a5d21
Child:
3:4cd9171ba989
diff -r 0e75de2a5d21 -r 6cd3b0947188 u8glibARM/u8g_dev_ht1632.c
--- a/u8glibARM/u8g_dev_ht1632.c	Mon Jun 13 02:21:11 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,282 +0,0 @@
-/*
- 
-  u8g_dev_ht1632.c
- 
-  1-Bit (BW) Driver for HT1632 controller
- 
-  Universal 8bit Graphics Library
- 
-  Copyright (c) 2013, olikraus@gmail.com
-  All rights reserved.
- 
-  Redistribution and use in source and binary forms, with or without modification,
-  are permitted provided that the following conditions are met:
- 
-  * Redistributions of source code must retain the above copyright notice, this list
-    of conditions and the following disclaimer.
-   
-  * Redistributions in binary form must reproduce the above copyright notice, this
-    list of conditions and the following disclaimer in the documentation and/or other
-    materials provided with the distribution.
- 
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-
-    U8G_PIN_NONE can be used as argument
-   
-    uint8_t u8g_InitSPI(u8g_t *u8g, u8g_dev_t *dev, uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset)
-    {
-      ...      
-      u8g->pin_list[U8G_PI_SCK] = sck;
-      u8g->pin_list[U8G_PI_MOSI] = mosi;
-      u8g->pin_list[U8G_PI_CS] = cs;
-      u8g->pin_list[U8G_PI_A0] = a0;
-      u8g->pin_list[U8G_PI_RESET] = reset;
-
-mapping  
-
-#define DATA_PIN --> U8G_PI_MOSI
-#define WR_PIN    --> U8G_PI_SCK
-#define CS_PIN      --> U8G_PI_CS
-				    U8G_PI_A0 --> not used
-				    U8G_PI_RESET --> not used
-
-Usage:
-
-    u8g_InitSPI(&u8g, &u8g_dev_ht1632_24x16, WR_PIN, DATA_IN, CS_PIN, U8G_PIN_NONE, U8G_PIN_NONE)
-
-*/
- 
-#include "u8g.h"
- 
-#define WIDTH 24
-#define HEIGHT 16
-#define PAGE_HEIGHT 16
- 
-/* http://forum.arduino.cc/index.php?topic=168537.0 */
- 
-#define HT1632_CMD_SYSDIS       0x00    // CMD= 0000-0000-x Turn off oscil
-#define HT1632_CMD_SYSON        0x01    // CMD= 0000-0001-x Enable system oscil
-#define HT1632_CMD_LEDOFF       0x02    // CMD= 0000-0010-x LED duty cycle gen off
-#define HT1632_CMD_LEDON        0x03    // CMD= 0000-0011-x LEDs ON
-#define HT1632_CMD_BLOFF        0x08    // CMD= 0000-1000-x Blink OFF
-#define HT1632_CMD_BLON         0x09    // CMD= 0000-1001-x Blink On
-#define HT1632_CMD_SLVMD        0x10    // CMD= 0001-00xx-x Slave Mode
-#define HT1632_CMD_MSTMD        0x14    // CMD= 0001-01xx-x Master Mode
-#define HT1632_CMD_RCCLK        0x18    // CMD= 0001-10xx-x Use on-chip clock
-#define HT1632_CMD_EXTCLK       0x1C    // CMD= 0001-11xx-x Use external clock
-#define HT1632_CMD_COMS00       0x20    // CMD= 0010-ABxx-x commons options
-#define HT1632_CMD_COMS01       0x24    // CMD= 0010-ABxx-x commons options
-#define HT1632_CMD_COMS10       0x28    // CMD= 0010-ABxx-x commons options
-#define HT1632_CMD_COMS11       0x2C    // P-MOS OUTPUT AND 16COMMON OPTION
-#define HT1632_CMD_PWM          0xA0    // CMD= 101x-PPPP-x PWM duty cycle
- 
-#define HT1632_ID_CMD   4       /* ID = 100 - Commands */
-#define HT1632_ID_RD    6       /* ID = 110 - Read RAM */
-#define HT1632_ID_WR    5       /* ID = 101 - Write RAM */
- 
-#define HT1632_ID_LEN           3               // IDs are 3 bits
-#define HT1632_CMD_LEN          8               // CMDs are 8 bits
-#define HT1632_DATA_LEN         8               // Data are 4*2 bits
-#define HT1632_ADDR_LEN         7               // Address are 7 bits
- 
-#if defined(ARDUINO)
- 
-#if ARDUINO < 100
-#include <WProgram.h>
-#else
-#include <Arduino.h>
-#endif
- 
-//#define WR_PIN 3
-//#define DATA_PIN 2
-//#define CS_PIN 4
- 
-void ht1632_write_data_MSB(u8g_t *u8g, uint8_t cnt, uint8_t data, uint8_t extra)
-{
-  int8_t i;
-  uint8_t data_pin = u8g->pin_list[U8G_PI_MOSI];
-  uint8_t wr_pin = u8g->pin_list[U8G_PI_SCK];
- 
-  for(i = cnt - 1; i >= 0; i--)
-  {
-    if ((data >> i) & 1)
-    {  
-      digitalWrite(data_pin, HIGH);
-    }
-    else
-    {
-      digitalWrite(data_pin, LOW);
-    }
- 
-    digitalWrite(wr_pin, LOW);
-    u8g_MicroDelay();
-    digitalWrite(wr_pin, HIGH);
-    u8g_MicroDelay();
-  }
- 
-  // Send an extra bit
-  if (extra)
-  {
-    digitalWrite(data_pin, HIGH);
-    digitalWrite(wr_pin, LOW);
-    u8g_MicroDelay();
-    digitalWrite(wr_pin, HIGH);
-    u8g_MicroDelay();
-  }
-}
- 
-void ht1632_write_data(u8g_t *u8g, uint8_t cnt, uint8_t data)
-{
-  uint8_t i;
-  uint8_t data_pin = u8g->pin_list[U8G_PI_MOSI];
-  uint8_t wr_pin = u8g->pin_list[U8G_PI_SCK];
-  for (i = 0; i < cnt; i++)
-  {
- 
-    if ((data >> i) & 1) {
-      digitalWrite(data_pin, HIGH);
-    }
-    else {
-      digitalWrite(data_pin, LOW);
-    }
- 
-    digitalWrite(wr_pin, LOW);
-    u8g_MicroDelay();
-    digitalWrite(wr_pin, HIGH);
-    u8g_MicroDelay();
-  }
-}
- 
- 
-void ht1632_init(u8g_t *u8g)
-{
-  //uint8_t i;
-  uint8_t data_pin = u8g->pin_list[U8G_PI_MOSI];
-  uint8_t wr_pin = u8g->pin_list[U8G_PI_SCK];
-  uint8_t cs_pin = u8g->pin_list[U8G_PI_CS];
-  pinMode(data_pin, OUTPUT);
-  pinMode(wr_pin, OUTPUT);
-  pinMode(cs_pin, OUTPUT);
- 
-  digitalWrite(data_pin, HIGH);
-  digitalWrite(wr_pin, HIGH);
-  digitalWrite(cs_pin, HIGH);
- 
-  digitalWrite(cs_pin, LOW);
-  /* init display once after startup */
-  ht1632_write_data_MSB(u8g, 3, HT1632_ID_CMD, false); // IDs are 3 bits
-  ht1632_write_data_MSB(u8g, 8, HT1632_CMD_SYSDIS, true); // 8 bits
-  ht1632_write_data_MSB(u8g, 8, HT1632_CMD_SYSON, true); // 8 bits
-  ht1632_write_data_MSB(u8g, 8, HT1632_CMD_COMS11, true); // 8 bits
-  ht1632_write_data_MSB(u8g, 8, HT1632_CMD_LEDON, true); // 8 bits
-  ht1632_write_data_MSB(u8g, 8, HT1632_CMD_BLOFF, true); // 8 bits
-  ht1632_write_data_MSB(u8g, 8, HT1632_CMD_PWM+15, true); // 8 bits  
-  digitalWrite(cs_pin, HIGH);
- 
-  /* removed following (debug) code */
-  /*
-  digitalWrite(cs_pin, LOW);
-  ht1632_write_data_MSB(u8g, 3, HT1632_ID_WR, false); // Send "write to display" command
-  ht1632_write_data_MSB(u8g, 7, 0, false);
-  for(i = 0; i<48; ++i)
-  {
-    ht1632_write_data(u8g, 8, 0xFF);
-  }
-  digitalWrite(cs_pin, HIGH);
-  */
-}
- 
-/*
-  page: 0=data contain lines 0..16, 1=data contain lines 16..32  (a 24x16 display will only have page 0)
-  cnt: width of the display
-  data: pointer to a buffer with 2*cnt bytes.
-*/
-void ht1632_transfer_data(u8g_t *u8g, uint8_t page, uint8_t cnt, uint8_t *data)
-{
-  uint8_t addr;
-  uint8_t cs_pin = u8g->pin_list[U8G_PI_CS];
-  /* send data to the ht1632 */
-  digitalWrite(cs_pin, LOW);
-  ht1632_write_data_MSB(u8g, 3, HT1632_ID_WR, false); // Send "write to display" command
-  ht1632_write_data_MSB(u8g, 7, page*2*cnt, false); 
-  
-  // Operating in progressive addressing mode
-  for (addr = 0; addr < cnt; addr++)
-  {
-    ht1632_write_data(u8g, 8, data[addr]);  
-    ht1632_write_data(u8g, 8, data[addr+cnt]);
-  }  
-  digitalWrite(cs_pin, HIGH);
-}
-
-/* value is between 0...15 */
-void ht1632_set_contrast(u8g_t *u8g, uint8_t value)
-{
-  uint8_t cs_pin = u8g->pin_list[U8G_PI_CS];
-  digitalWrite(cs_pin, LOW);
-  ht1632_write_data_MSB(u8g, 3, HT1632_ID_CMD, false);
-  ht1632_write_data_MSB(u8g, 8, HT1632_CMD_PWM + value, false);
-  digitalWrite(cs_pin, HIGH);
-}
- 
-#else
-void ht1632_init(u8g_t *u8g)
-{
-}
- 
-void ht1632_transfer_data(u8g_t *u8g, uint8_t page, uint8_t cnt, uint8_t *data)
-{
-}
-
-void ht1632_set_contrast(u8g_t *u8g, uint8_t value)
-{
-}
-
-#endif /* ARDUINO */
- 
- 
-uint8_t u8g_dev_ht1632_24x16_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
-  switch(msg)
-  {
-    case U8G_DEV_MSG_INIT:
-      ht1632_init(u8g);
-      break;
-    case U8G_DEV_MSG_STOP:
-      break;
-    case U8G_DEV_MSG_PAGE_NEXT:
-      {
-	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
-       
-	/* current page: pb->p.page */
-	/* ptr to the buffer: pb->buf */
-	ht1632_transfer_data(u8g, pb->p.page, WIDTH, pb->buf);
-      }
-      break;
-    case U8G_DEV_MSG_CONTRAST:
-      /* values passed to SetContrast() are between 0 and 255, scale down to 0...15 */
-      ht1632_set_contrast(u8g, (*(uint8_t *)arg) >> 4);
-    return 1;
-  }
-  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
-}
- 
-uint8_t u8g_dev_ht1632_24x16_buf[WIDTH*2] U8G_NOCOMMON ; 
-u8g_pb_t u8g_dev_ht1632_24x16_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ht1632_24x16_buf}; 
-u8g_dev_t u8g_dev_ht1632_24x16 = { u8g_dev_ht1632_24x16_fn, &u8g_dev_ht1632_24x16_pb, u8g_com_null_fn };
-
-