Diff: u8glibARM/u8g_dev_ssd1325_nhd27oled_bw_new.c

Revision:

2:6cd3b0947188

Parent:

1:0e75de2a5d21

Child:

3:4cd9171ba989

--- a/u8glibARM/u8g_dev_ssd1325_nhd27oled_bw_new.c	Mon Jun 13 02:21:11 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,233 +0,0 @@
-/*
-
-  u8g_dev_ssd1325_nhd27oled_bw.c
-  
-  1-Bit (BW) Driver for SSD1325 Controller (OLED Display)
-  Horizontal architecture, completly rewritten
-  Tested with NHD-2.7-12864UCY3
-
-  Universal 8bit Graphics Library
-  
-  Copyright (c) 2012, olikraus@gmail.com
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without modification, 
-  are permitted provided that the following conditions are met:
-
-  * Redistributions of source code must retain the above copyright notice, this list 
-    of conditions and the following disclaimer.
-    
-  * Redistributions in binary form must reproduce the above copyright notice, this 
-    list of conditions and the following disclaimer in the documentation and/or other 
-    materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
-  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
-  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
-  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
-  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
-  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
-  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
-  
-  SSD130x       Monochrom OLED Controller
-  SSD131x       Character OLED Controller
-  SSD132x       Graylevel OLED Controller
-  SSD1331       Color OLED Controller       
-
-*/
-
-#include "u8g.h"
-
-/* width must be multiple of 8, largest value is 248 unless u8g 16 bit mode is enabled */
-#define WIDTH 128
-#define HEIGHT 64
-
-/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
-static const uint8_t u8g_dev_ssd1325_nhd_27_12864_init_seq[] PROGMEM = {
-  U8G_ESC_DLY(10),              /* delay 10 ms */
-  U8G_ESC_CS(0),                 /* disable chip */
-  U8G_ESC_ADR(0),               /* instruction mode */
-  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
-  U8G_ESC_CS(1),                /* enable chip */
-  0x0ae,                                /* display off, sleep mode */
-  0x0b3, 0x091,                    /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
-  0x0a8, 0x03f,                     /* multiplex ratio: 0x03f * 1/64 duty */
-  0x0a2, 0x04c,                     /* display offset, shift mapping ram counter */
-  0x0a1, 0x000,                     /* display start line */
-  0x0ad, 0x002,                     /* master configuration: disable embedded DC-DC, enable internal VCOMH */
-  0x0a0, 0x052,                     /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1) */
-  0x086,                                /* full current range (0x084, 0x085, 0x086) */
-  0x0b8,                                /* set gray scale table */
-      0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
-  
-  0x081, 0x070,                    /* contrast, brightness, 0..128, Newhaven: 0x040 */
-  0x0b2, 0x051,                    /* frame frequency (row period) */
-  0x0b1, 0x055,                    /* phase length */
-  0x0bc, 0x010,                    /* pre-charge voltage level */
-  0x0b4, 0x002,                    /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
-  0x0b0, 0x028,                    /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
-  0x0be, 0x01c,                     /* VCOMH voltage */
-  0x0bf, 0x002|0x00d,           /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
-  0x0a4,                                 /* normal display mode */
-  0x0af,                                  /* display on */
-  U8G_ESC_DLY(50),             /* delay 50 ms */
-  U8G_ESC_CS(0),             /* disable chip */
-  U8G_ESC_END                /* end of sequence */
-};
-
-static const uint8_t u8g_dev_ssd1325_prepare_row_seq[] PROGMEM = {
-  U8G_ESC_ADR(0),               /* instruction mode */
-  U8G_ESC_CS(1),                /* enable chip */
-  0x015,       /* column address... */
-  0x000,       /* start at column 0 */
-  0x03f,       /* end at column 63 (which is y == 127), because there are two pixel in one column */
-  0x075,       /* row address... */
-  U8G_ESC_END                /* end of sequence */
-};
-
-static void u8g_dev_ssd1325_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row)
-{
-  uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page;
-  
-  row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height;
-  row += delta_row;
-  
-  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_prepare_row_seq);
-  
-  u8g_WriteByte(u8g, dev, row);       /* start at the selected row */
-  u8g_WriteByte(u8g, dev, row+1);       /* end within the selected row */  
-  
-  //u8g_SetAddress(u8g, dev, 0);          /* instruction mode mode */
-  //u8g_WriteByte(u8g, dev, 0x05c);       /* write to ram */  
-  u8g_SetAddress(u8g, dev, 1);          /* data mode */
-}
-
-static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
-  U8G_ESC_ADR(0),           /* instruction mode */
-  U8G_ESC_CS(1),             /* enable chip */
-  0x0ae,		/* display off */      
-  U8G_ESC_CS(0),             /* disable chip, bugfix 12 nov 2014 */
-  U8G_ESC_END                /* end of sequence */
-};
-
-static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
-  U8G_ESC_ADR(0),           /* instruction mode */
-  U8G_ESC_CS(1),             /* enable chip */
-  0x0af,		/* display on */      
-  U8G_ESC_DLY(50),       /* delay 50 ms */
-  U8G_ESC_CS(0),             /* disable chip, bugfix 12 nov 2014 */
-  U8G_ESC_END                /* end of sequence */
-};
-
-
-static uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
-  switch(msg)
-  {
-    //case U8G_DEV_MSG_IS_BBX_INTERSECTION:
-    //  return u8g_pb_IsIntersection((u8g_pb_t *)(dev->dev_mem), (u8g_dev_arg_bbx_t *)arg);
-    case U8G_DEV_MSG_INIT:
-      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
-      break;
-    case U8G_DEV_MSG_STOP:
-      break;
-    case U8G_DEV_MSG_PAGE_NEXT:
-      {
-	uint8_t i;
-	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
-	uint8_t *p = pb->buf;
-	u8g_uint_t cnt;
-	cnt = pb->width;
-	cnt >>= 3;
-
-	for( i = 0; i < pb->p.page_height; i++ )
-	{
-	  u8g_dev_ssd1325_prepare_row(u8g, dev, i);		/* this will also enable chip select */
-	  u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
-	  u8g_SetChipSelect(u8g, dev, 0);        
-	  p+=cnt;
-	}
-      }
-      break;
-    case U8G_DEV_MSG_CONTRAST:
-      u8g_SetChipSelect(u8g, dev, 1);
-      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
-      u8g_WriteByte(u8g, dev, 0x081);
-      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
-      u8g_SetChipSelect(u8g, dev, 0);      
-      break;
-    case U8G_DEV_MSG_SLEEP_ON:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
-      return 1;
-    case U8G_DEV_MSG_SLEEP_OFF:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
-      return 1;
-  }
-  return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
-}
-
-static uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
-  switch(msg)
-  {
-    case U8G_DEV_MSG_INIT:
-      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
-      break;
-    case U8G_DEV_MSG_STOP:
-      break;
-    case U8G_DEV_MSG_PAGE_NEXT:
-      {
-	uint8_t i;
-	u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
-	uint8_t *p = pb->buf;
-	u8g_uint_t cnt;
-	cnt = pb->width;
-	cnt >>= 3;
-
-	for( i = 0; i < pb->p.page_height; i++ )
-	{
-	  u8g_dev_ssd1325_prepare_row(u8g, dev, i);		/* this will also enable chip select */
-	  u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
-	  u8g_SetChipSelect(u8g, dev, 0);        
-	  p+=cnt;
-	}
-      }
-      break;
-    case U8G_DEV_MSG_CONTRAST:
-      u8g_SetChipSelect(u8g, dev, 1);
-      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
-      u8g_WriteByte(u8g, dev, 0x081);
-      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
-      u8g_SetChipSelect(u8g, dev, 0);      
-      break;
-    case U8G_DEV_MSG_SLEEP_ON:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
-      return 1;
-    case U8G_DEV_MSG_SLEEP_OFF:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
-      return 1;
-  }
-  return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
-}
-
-
-
-U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_sw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_SW_SPI);
-U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_hw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_HW_SPI);
-U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_parallel , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_FAST_PARALLEL);
-
-uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_buf[WIDTH*2] U8G_NOCOMMON ; 
-u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1325_nhd27oled_2x_bw_buf}; 
-u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_SW_SPI };
-u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_HW_SPI };
-u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_parallel = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_FAST_PARALLEL };
-
-