Diff: u8glibARM/u8g_dev_ssd1325_nhd27oled_bw.c

Revision:

2:6cd3b0947188

Parent:

1:0e75de2a5d21

Child:

3:4cd9171ba989

--- a/u8glibARM/u8g_dev_ssd1325_nhd27oled_bw.c	Mon Jun 13 02:21:11 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,264 +0,0 @@
-/*
-
-  u8g_dev_ssd1325_nhd27oled_bw.c
-  
-  1-Bit (BW) Driver for SSD1325 Controller (OLED Display)
-  Tested with NHD-2.7-12864UCY3
-
-  Universal 8bit Graphics Library
-  
-  Copyright (c) 2011, olikraus@gmail.com
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without modification, 
-  are permitted provided that the following conditions are met:
-
-  * Redistributions of source code must retain the above copyright notice, this list 
-    of conditions and the following disclaimer.
-    
-  * Redistributions in binary form must reproduce the above copyright notice, this 
-    list of conditions and the following disclaimer in the documentation and/or other 
-    materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
-  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
-  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
-  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
-  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
-  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
-  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
-  
-  SSD130x       Monochrom OLED Controller
-  SSD131x       Character OLED Controller
-  SSD132x       Graylevel OLED Controller
-  SSD1331       Color OLED Controller       
-
-*/
-
-#ifdef OBSOLETE_CODE
-
-#include "u8g.h"
-
-#define WIDTH 128
-#define HEIGHT 64
-#define PAGE_HEIGHT 8
-
-/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
-static const uint8_t u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq[] PROGMEM = {
-  U8G_ESC_DLY(10),              /* delay 10 ms */
-  U8G_ESC_CS(0),                 /* disable chip */
-  U8G_ESC_ADR(0),               /* instruction mode */
-  U8G_ESC_RST(1),               /* do reset low pulse with (1*16)+2 milliseconds */
-  U8G_ESC_CS(1),                /* enable chip */
-  0x0ae,                                /* display off, sleep mode */
-  0x0b3, 0x091,                    /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
-  0x0a8, 0x03f,                     /* multiplex ratio: 0x03f * 1/64 duty */
-  0x0a2, 0x04c,                     /* display offset, shift mapping ram counter */
-  0x0a1, 0x000,                     /* display start line */
-  0x0ad, 0x002,                     /* master configuration: disable embedded DC-DC, enable internal VCOMH */
-  0x0a0, 0x056,                     /* remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */
-  0x086,                                /* full current range (0x084, 0x085, 0x086) */
-  0x0b8,                                /* set gray scale table */
-      0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
-  0x081, 0x070,                    /* contrast, brightness, 0..128, Newhaven: 0x040 */
-  0x0b2, 0x051,                    /* frame frequency (row period) */
-  0x0b1, 0x055,                    /* phase length */
-  0x0bc, 0x010,                    /* pre-charge voltage level */
-  0x0b4, 0x002,                    /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
-  0x0b0, 0x028,                    /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
-  0x0be, 0x01c,                     /* VCOMH voltage */
-  0x0bf, 0x002|0x00d,           /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
-  0x0a5,                                 /* all pixel on */
-  0x0af,                                  /* display on */
-  U8G_ESC_DLY(100),             /* delay 100 ms */
-  U8G_ESC_DLY(100),             /* delay 100 ms */
-  0x0a4,                                 /* normal display mode */
-  U8G_ESC_CS(0),             /* disable chip */
-  U8G_ESC_END                /* end of sequence */
-};
-
-static const uint8_t u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq[] PROGMEM = {
-  U8G_ESC_ADR(0),               /* instruction mode */
-  U8G_ESC_CS(1),                /* enable chip */
-  0x015,       /* column address... */
-  0x000,       /* start at column 0 */
-  0x03f,       /* end at column 63 (which is y == 127), because there are two pixel in one column */
-  0x075,       /* row address... */
-  U8G_ESC_END                /* end of sequence */
-};
-
-
-static void u8g_dev_ssd1325_1bit_prepare_page(u8g_t *u8g, u8g_dev_t *dev)
-{
-  uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
-  
-  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq);
-  
-  page <<= 3;
-  u8g_WriteByte(u8g, dev, page);       /* start at the selected page */
-  page += 7;
-  u8g_WriteByte(u8g, dev, page);       /* end within the selected page */  
-  
-  u8g_SetAddress(u8g, dev, 1);          /* data mode */
-}
-
-static void u8g_dev_ssd1325_1bit_2x_prepare_page(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
-{
-  uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
-  
-  u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_prepare_page_seq);
-  
-  page <<= 1;
-  page += is_odd;
-  
-  page <<= 3;
-  u8g_WriteByte(u8g, dev, page);       /* start at the selected page */
-  page += 7;
-  u8g_WriteByte(u8g, dev, page);       /* end within the selected page */  
-  
-  u8g_SetAddress(u8g, dev, 1);          /* data mode */
-}
-
-/* assumes row autoincrement and activated nibble remap */
-#ifdef OLD
-static  void _OLD_u8g_dev_ssd1325_1bit_write_16_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right)
-{
-  uint8_t d, cnt;
-  cnt = 8;
-  do
-  {
-    d = 0;
-    if ( left & 1 )
-      d |= 0x0f0;
-    if ( right & 1 )
-      d |= 0x00f;
-    u8g_WriteByte(u8g, dev, d);
-    left >>= 1;
-    right >>= 1;
-    cnt--;
-  }while ( cnt > 0 );
-}
-#endif
-
-static  void u8g_dev_ssd1325_1bit_write_16_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right)
-{
-  uint8_t d, cnt;
-  static uint8_t buf[8];
-  cnt = 8;
-  do
-  {
-    d = 0;
-    if ( left & 128 )
-      d |= 0x0f0;
-    if ( right & 128 )
-      d |= 0x00f;
-    cnt--;
-    buf[cnt] = d;
-    left <<= 1;
-    right <<= 1;
-  }while ( cnt > 0 );
-  u8g_WriteSequence(u8g, dev, 8, buf);
-}
-
-static void u8g_dev_ssd1325_1bit_write_buffer(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
-{
-  uint8_t cnt, left, right;
-  uint8_t *ptr;
-  u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
-  
-  ptr = pb->buf;
-  cnt = pb->width;
-  if ( is_odd )
-    ptr += cnt;
-  cnt >>= 1;
-  do
-  {
-    left = *ptr++;
-    right = *ptr++;
-    u8g_dev_ssd1325_1bit_write_16_pixel(u8g, dev, left, right);
-    cnt--;
-  } while( cnt > 0 );
-}
-
-uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
-  switch(msg)
-  {
-    case U8G_DEV_MSG_INIT:
-      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq);
-      break;
-    case U8G_DEV_MSG_STOP:
-      break;
-    case U8G_DEV_MSG_PAGE_NEXT:
-      {
-        u8g_dev_ssd1325_1bit_prepare_page(u8g, dev);
-        u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 0);
-        u8g_SetChipSelect(u8g, dev, 0);        
-      }
-      break;
-    case U8G_DEV_MSG_CONTRAST:
-      u8g_SetChipSelect(u8g, dev, 1);
-      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
-      u8g_WriteByte(u8g, dev, 0x081);
-      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
-      u8g_SetChipSelect(u8g, dev, 0);      
-      break;
-  }
-  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
-}
-
-uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
-  switch(msg)
-  {
-    case U8G_DEV_MSG_INIT:
-      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq);
-      break;
-    case U8G_DEV_MSG_STOP:
-      break;
-    case U8G_DEV_MSG_PAGE_NEXT:
-      {
-        u8g_dev_ssd1325_1bit_2x_prepare_page(u8g, dev, 0);
-        u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 0);
-        u8g_dev_ssd1325_1bit_2x_prepare_page(u8g, dev, 1);
-        u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 1);
-        u8g_SetChipSelect(u8g, dev, 0);        
-      }
-      break;
-    case U8G_DEV_MSG_CONTRAST:
-      u8g_SetChipSelect(u8g, dev, 1);
-      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
-      u8g_WriteByte(u8g, dev, 0x081);
-      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
-      u8g_SetChipSelect(u8g, dev, 0);      
-      break;
-  }
-  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
-}
-
-/* disabled, see bw_new.c */
-/*
-U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_sw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_SW_SPI);
-U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_hw_spi , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_HW_SPI);
-U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_parallel , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_FAST_PARALLEL);
-*/
-
-/*
-uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_buf[WIDTH*2] U8G_NOCOMMON ; 
-u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1325_nhd27oled_2x_bw_buf}; 
-u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_SW_SPI };
-u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_HW_SPI };
-u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_parallel = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_FAST_PARALLEL };
-*/
-
-#endif
-
-