Diff: u8glibARM/u8g_dev_ssd1306_128x32.c

Revision:

2:6cd3b0947188

Parent:

1:0e75de2a5d21

Child:

3:4cd9171ba989

--- a/u8glibARM/u8g_dev_ssd1306_128x32.c	Mon Jun 13 02:21:11 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,290 +0,0 @@
-/*
-
-  u8g_dev_ssd1306_128x32.c
-
-  Universal 8bit Graphics Library
-  
-  Copyright (c) 2011, olikraus@gmail.com
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without modification, 
-  are permitted provided that the following conditions are met:
-
-  * Redistributions of source code must retain the above copyright notice, this list 
-    of conditions and the following disclaimer.
-    
-  * Redistributions in binary form must reproduce the above copyright notice, this 
-    list of conditions and the following disclaimer in the documentation and/or other 
-    materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
-  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
-  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
-  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
-  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
-  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
-  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
-
-  
-  23 Feb 2013: Fixed, Issue 147
-
-*/
-
-
-#include "u8g.h"
-
-#define WIDTH 128
-#define HEIGHT 32
-#define PAGE_HEIGHT 8
-
-
-/* init sequence adafruit 128x32 OLED (NOT TESTED) */
-static const uint8_t u8g_dev_ssd1306_128x32_adafruit1_init_seq[] PROGMEM = {
-  U8G_ESC_CS(0),        /* disable chip */
-  U8G_ESC_ADR(0),       /* instruction mode */
-  U8G_ESC_RST(1),       /* do reset low pulse with (1*16)+2 milliseconds */
-  U8G_ESC_CS(1),        /* enable chip */
-
-  0x0ae,				/* display off, sleep mode */
-  0x0d5, 0x080,			/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
-  0x0a8, 0x03f,			/* */
-
-  0x0d3, 0x000,			/*  */
-
-  0x040,				/* start line */
-  
-  0x08d, 0x010,			/* [1] charge pump setting (p62): 0x014 enable, 0x010 disable */
-
-  0x020, 0x000,			/* */
-  0x0a1,				/* segment remap a0/a1*/
-  0x0c8,				/* c0: scan dir normal, c8: reverse */
-  0x0da, 0x012,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
-  0x081, 0x09f,			/* [1] set contrast control */
-  0x0d9, 0x022,			/* [1] pre-charge period 0x022/f1*/
-  0x0db, 0x040,			/* vcomh deselect level */
-  
-  0x02e,				/* 2012-05-27: Deactivate scroll */ 
-  0x0a4,				/* output ram to display */
-  0x0a6,				/* none inverted normal display mode */
-  0x0af,				/* display on */
-
-  U8G_ESC_CS(0),        /* disable chip */
-  U8G_ESC_END           /* end of sequence */
-};
-
-
-/* init sequence adafruit 128x32 OLED (NOT TESTED) */
-static const uint8_t u8g_dev_ssd1306_128x32_adafruit2_init_seq[] PROGMEM = {
-  U8G_ESC_CS(0),        /* disable chip */
-  U8G_ESC_ADR(0),       /* instruction mode */
-  U8G_ESC_RST(1),       /* do reset low pulse with (1*16)+2 milliseconds */
-  U8G_ESC_CS(1),        /* enable chip */
-
-  0x0ae,				/* display off, sleep mode */
-  0x0d5, 0x080,			/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
-  0x0a8, 0x03f,			/* */
-
-  0x0d3, 0x000,			/*  */
-
-  0x040,				/* start line */
-  
-  0x08d, 0x014,			/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
-
-  0x020, 0x000,			/* */
-  0x0a1,				/* segment remap a0/a1*/
-  0x0c8,				/* c0: scan dir normal, c8: reverse */
-  0x0da, 0x012,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
-  0x081, 0x0cf,			/* [2] set contrast control */
-  0x0d9, 0x0f1,			/* [2] pre-charge period 0x022/f1*/
-  0x0db, 0x040,			/* vcomh deselect level */
-  
-  0x02e,				/* 2012-05-27: Deactivate scroll */ 
-  0x0a4,				/* output ram to display */
-  0x0a6,				/* none inverted normal display mode */
-  0x0af,				/* display on */
-
-  U8G_ESC_CS(0),        /* disable chip */
-  U8G_ESC_END           /* end of sequence */
-};
-
-
-/* init sequence adafruit 128x32 OLED (TESTED - WORKING 23.02.13), like adafruit3, but with page addressing mode */
-static const uint8_t u8g_dev_ssd1306_128x32_adafruit3_init_seq[] PROGMEM = {
-  U8G_ESC_CS(0),        /* disable chip */
-  U8G_ESC_ADR(0),       /* instruction mode */
-  U8G_ESC_RST(1),		/* do reset low pulse with (1*16)+2 milliseconds */
-  U8G_ESC_CS(1),        /* enable chip */
-
-  0x0ae,				/* display off, sleep mode */
-  0x0d5, 0x080,			/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
-  0x0a8, 0x01f,			/* Feb 23, 2013: 128x32 OLED: 0x01f,  128x32 OLED 0x03f */
-
-  0x0d3, 0x000,			/*  */
-
-  0x040,				/* start line */
-  
-  0x08d, 0x014,			/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */ 
-
-  0x020, 0x002,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5), Feb 23, 2013: 128x32 OLED: 0x002,  128x32 OLED 0x012 */
-  0x0a1,				/* segment remap a0/a1*/
-  0x0c8,				/* c0: scan dir normal, c8: reverse */
-  0x0da, 0x002,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
-  0x081, 0x0cf,			/* [2] set contrast control */
-  0x0d9, 0x0f1,			/* [2] pre-charge period 0x022/f1*/
-  0x0db, 0x040,			/* vcomh deselect level */
-  
-  0x02e,				/* 2012-05-27: Deactivate scroll */ 
-  0x0a4,				/* output ram to display */
-  0x0a6,				/* none inverted normal display mode */
-  0x0af,				/* display on */
-
-  U8G_ESC_CS(0),        /* disable chip */
-  U8G_ESC_END           /* end of sequence */
-};
-
-
-/* init sequence Univision datasheet (NOT TESTED) */
-static const uint8_t u8g_dev_ssd1306_128x32_univision_init_seq[] PROGMEM = {
-  U8G_ESC_CS(0),        /* disable chip */
-  U8G_ESC_ADR(0),       /* instruction mode */
-  U8G_ESC_RST(1),       /* do reset low pulse with (1*16)+2 milliseconds */
-  U8G_ESC_CS(1),        /* enable chip */
-
-  0x0ae,				/* display off, sleep mode */
-  0x0d5, 0x080,			/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
-  0x0a8, 0x03f,			/* multiplex ratio */
-  0x0d3, 0x000,			/* display offset */
-  0x040,				/* start line */
-  0x08d, 0x010,			/* charge pump setting (p62): 0x014 enable, 0x010 disable */
-  0x0a1,				/* segment remap a0/a1*/
-  0x0c8,				/* c0: scan dir normal, c8: reverse */
-  0x0da, 0x012,			/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
-  0x081, 0x09f,			/* set contrast control */
-  0x0d9, 0x022,			/* pre-charge period */
-  0x0db, 0x040,			/* vcomh deselect level */
-  0x022, 0x000,			/* page addressing mode WRONG: 3 byte cmd! */
-  0x0a4,				/* output ram to display */
-  0x0a6,				/* none inverted normal display mode */
-  0x0af,				/* display on */
-  U8G_ESC_CS(0),        /* disable chip */
-  U8G_ESC_END           /* end of sequence */
-};
-
-
-/* select one init sequence here */
-//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_univision_init_seq
-//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit1_init_seq
-//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit2_init_seq
-#define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit3_init_seq
-
-
-static const uint8_t u8g_dev_ssd1306_128x32_data_start[] PROGMEM = {
-  U8G_ESC_ADR(0),       /* instruction mode */
-  U8G_ESC_CS(1),        /* enable chip */
-  0x010,				/* set upper 4 bit of the col adr. to 0 */
-  0x000,				/* set lower 4 bit of the col adr. to 4  */
-  U8G_ESC_END           /* end of sequence */
-};
-
-static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
-  U8G_ESC_ADR(0),           /* instruction mode */
-  U8G_ESC_CS(1),             /* enable chip */
-  0x0ae,		/* display off */      
-  U8G_ESC_CS(0),             /* disable chip, bugfix 12 nov 2014 */
-  U8G_ESC_END                /* end of sequence */
-};
-
-static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
-  U8G_ESC_ADR(0),           /* instruction mode */
-  U8G_ESC_CS(1),             /* enable chip */
-  0x0af,		/* display on */      
-  U8G_ESC_DLY(50),       /* delay 50 ms */
-  U8G_ESC_CS(0),             /* disable chip, bugfix 12 nov 2014 */
-  U8G_ESC_END                /* end of sequence */
-};
-
-uint8_t u8g_dev_ssd1306_128x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
-  switch(msg)
-  {
-    case U8G_DEV_MSG_INIT:
-      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq);
-      break;
-    case U8G_DEV_MSG_STOP:
-      break;
-    case U8G_DEV_MSG_PAGE_NEXT:
-      {
-        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
-        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start);    
-        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page);	/* select current page (SSD1306) */
-        u8g_SetAddress(u8g, dev, 1);					/* data mode */
-        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
-          return 0;
-        u8g_SetChipSelect(u8g, dev, 0);
-      }
-      break;
-    case U8G_DEV_MSG_SLEEP_ON:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
-      return 1;
-    case U8G_DEV_MSG_SLEEP_OFF:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
-      return 1;
-}
-  
-  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
-}
-
-uint8_t u8g_dev_ssd1306_128x32_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
-  switch(msg)
-  {
-    case U8G_DEV_MSG_INIT:
-      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq);
-      break;
-    case U8G_DEV_MSG_STOP:
-      break;
-    case U8G_DEV_MSG_PAGE_NEXT:
-      {
-        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
-	
-        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start);    
-        u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2));	/* select current page (SSD1306) */
-        u8g_SetAddress(u8g, dev, 1);					/* data mode */
-	u8g_WriteSequence(u8g, dev, pb->width, pb->buf); 
-        u8g_SetChipSelect(u8g, dev, 0);
-	
-        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start);    
-        u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1));	/* select current page (SSD1306) */
-        u8g_SetAddress(u8g, dev, 1);					/* data mode */
-	u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width); 
-        u8g_SetChipSelect(u8g, dev, 0);
-      }
-      break;
-    case U8G_DEV_MSG_SLEEP_ON:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
-      return 1;
-    case U8G_DEV_MSG_SLEEP_OFF:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
-      return 1;
-  }
-  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
-}
-
-U8G_PB_DEV(u8g_dev_ssd1306_128x32_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_SW_SPI);
-U8G_PB_DEV(u8g_dev_ssd1306_128x32_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_HW_SPI);
-U8G_PB_DEV(u8g_dev_ssd1306_128x32_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_SSD_I2C);
-
-uint8_t u8g_dev_ssd1306_128x32_2x_buf[WIDTH*2] U8G_NOCOMMON ; 
-u8g_pb_t u8g_dev_ssd1306_128x32_2x_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1306_128x32_2x_buf}; 
-u8g_dev_t u8g_dev_ssd1306_128x32_2x_sw_spi = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_SW_SPI };
-u8g_dev_t u8g_dev_ssd1306_128x32_2x_hw_spi = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_HW_SPI };
-u8g_dev_t u8g_dev_ssd1306_128x32_2x_i2c = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_SSD_I2C };
-