Diff: u8glibARM/u8g_dev_ld7032_60x32.c

Revision:

2:6cd3b0947188

Parent:

1:0e75de2a5d21

Child:

3:4cd9171ba989

--- a/u8glibARM/u8g_dev_ld7032_60x32.c	Mon Jun 13 02:21:11 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,233 +0,0 @@
-/*
-
-  u8g_dev_ld7032_60x32.c
-  
-  60x32 OLED display
-
-  Universal 8bit Graphics Library
-  
-  Copyright (c) 2011, olikraus@gmail.com
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without modification, 
-  are permitted provided that the following conditions are met:
-
-  * Redistributions of source code must retain the above copyright notice, this list 
-    of conditions and the following disclaimer.
-    
-  * Redistributions in binary form must reproduce the above copyright notice, this 
-    list of conditions and the following disclaimer in the documentation and/or other 
-    materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
-  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
-  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
-  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
-  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
-  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
-  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
-  
-  
-*/
-
-#include "u8g.h"
-
-/* define width as 64, so that it is a multiple of 8 */
-#define WIDTH 64
-#define HEIGHT 32
-#define PAGE_HEIGHT 8
-
-static const uint8_t u8g_dev_ld7032_60x32_init_seq[] PROGMEM = {
-  U8G_ESC_CS(0),             /* disable chip */
-  U8G_ESC_ADR(0),           /* instruction mode */
-  U8G_ESC_DLY(1),       	/* delay 1 ms */
-  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
-  U8G_ESC_CS(1),             /* enable chip */
-  
-  
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x002,				/* Dot Matrix Display ON/OFF */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x001,				/* ON */
-  
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x014,				/* Dot Matrix Display Stand-by ON/OFF */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* ON */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x01a,				/* Dot Matrix Frame Rate */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x004,				/* special value for this OLED from manual */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x01d,				/* Graphics Memory Writing Direction */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* reset default (right down, horizontal) */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x009,				/* Display Direction */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* reset default (x,y: min --> max) */
-  
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x030,				/* Display Size X */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* Column Start Output */
-  0x03b,				/* Column End Output */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x032,				/* Display Size Y */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* Row Start Output */
-  0x01f,				/* Row End Output */
-  
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x010,				/* Peak Pulse Width Set */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* 0 SCLK */
-  
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x016,				/* Peak Pulse Delay Set */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* 0 SCLK */
-  
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x012,				/* Dot Matrix Current Level Set */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x050,				/* 0x050 * 1 uA = 80 uA */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x018,				/* Pre-Charge Pulse Width */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x003,				/* 3 SCLK */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x044,				/* Pre-Charge Mode */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x002,				/* Every Time */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x048,				/* Row overlap timing */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x003,				/* Pre-Charge + Peak Delay + Peak boot Timing */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x03f,				/* VCC_R_SEL */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x011,				/* ??? */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x03d,				/* VSS selection */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* 2.8V */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x002,				/* Dot Matrix Display ON/OFF */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x001,				/* ON */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x008,				/* write data */
-
-  U8G_ESC_CS(0),             /* disable chip */
-  U8G_ESC_END                /* end of sequence */
-};
-
-/* use box commands to set start adr */
-static const uint8_t u8g_dev_ld7032_60x32_data_start[] PROGMEM = {
-  U8G_ESC_ADR(0),           /* instruction mode */
-  U8G_ESC_CS(1),             /* enable chip */
-  
-  
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x034,				/* box x start */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x000,				/* 0 */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x035,				/* box x end */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x007,				/*  */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x037,				/* box y end */
-  U8G_ESC_ADR(1),           /* data mode */
-  0x01f,				/*  */
-
-  U8G_ESC_ADR(0),           /* instruction mode */
-  0x036,				/* box y start */
-  U8G_ESC_ADR(1),           /* data mode */
-
-  U8G_ESC_END                /* end of sequence */
-};
-
-static const uint8_t u8g_dev_ld7032_60x32_sleep_on[] PROGMEM = {
-  U8G_ESC_ADR(0),           /* instruction mode */
-  U8G_ESC_CS(1),             /* enable chip */
-  /* ... */
-  U8G_ESC_CS(0),             /* disable chip */
-  U8G_ESC_END                /* end of sequence */
-};
-
-static const uint8_t u8g_dev_ld7032_60x32_sleep_off[] PROGMEM = {
-  U8G_ESC_ADR(0),           /* instruction mode */
-  U8G_ESC_CS(1),             /* enable chip */
-  /* ... */
-  U8G_ESC_DLY(50),       /* delay 50 ms */
-  U8G_ESC_CS(0),             /* disable chip */
-  U8G_ESC_END                /* end of sequence */
-};
-
-uint8_t u8g_dev_ld7032_60x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
-{
-  switch(msg)
-  {
-    case U8G_DEV_MSG_INIT:
-      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_init_seq);
-      break;
-    case U8G_DEV_MSG_STOP:
-      break;
-    case U8G_DEV_MSG_PAGE_NEXT:
-      {
-        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
-        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_data_start);    
-        u8g_WriteByte(u8g, dev, pb->p.page_y0); /* y start */
-	u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
-	u8g_WriteByte(u8g, dev, 0x008);
-        u8g_SetAddress(u8g, dev, 1);           /* data mode */
-        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
-          return 0;
-        u8g_SetChipSelect(u8g, dev, 0);
-      }
-      break;
-    case U8G_DEV_MSG_CONTRAST:
-      u8g_SetChipSelect(u8g, dev, 1);
-      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
-      u8g_WriteByte(u8g, dev, 0x081);
-      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
-      u8g_SetChipSelect(u8g, dev, 0);      
-      return 1;
-    case U8G_DEV_MSG_SLEEP_ON:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_sleep_on);    
-      return 1;
-    case U8G_DEV_MSG_SLEEP_OFF:
-      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_sleep_off);    
-      return 1;
-  }
-  return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
-}
-
-U8G_PB_DEV(u8g_dev_ld7032_60x32_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ld7032_60x32_fn, U8G_COM_SW_SPI);
-U8G_PB_DEV(u8g_dev_ld7032_60x32_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ld7032_60x32_fn, U8G_COM_HW_SPI);
-U8G_PB_DEV(u8g_dev_ld7032_60x32_parallel, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ld7032_60x32_fn, U8G_COM_PARALLEL);
-U8G_PB_DEV(u8g_dev_ld7032_60x32_hw_usart_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ld7032_60x32_fn, U8G_COM_HW_USART_SPI);
-
-