hadif azli / Mbed 2 deprecated TEST123

Dependencies:   mbed Blynk

Revision:
2:6cd3b0947188
Parent:
1:0e75de2a5d21
Child:
3:4cd9171ba989
--- a/u8glibARM/u8g_com_raspberrypi_hw_spi.c	Mon Jun 13 02:21:11 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,125 +0,0 @@
-/*
-  
-  u8g_com_raspberrypi_hw_spi.c
-
-  Universal 8bit Graphics Library
-  
-  Copyright (c) 2012, olikraus@gmail.com
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without modification, 
-  are permitted provided that the following conditions are met:
-
-  * Redistributions of source code must retain the above copyright notice, this list 
-    of conditions and the following disclaimer.
-    
-  * Redistributions in binary form must reproduce the above copyright notice, this 
-    list of conditions and the following disclaimer in the documentation and/or other 
-    materials provided with the distribution.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
-  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
-  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
-  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
-  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
-  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
-  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
-  
-  
-  Assumes, that 
-    MOSI is at PORTB, Pin 3
-  and
-    SCK is at PORTB, Pin 5
-
-  Update for ATOMIC operation done (01 Jun 2013)
-    U8G_ATOMIC_OR(ptr, val)
-    U8G_ATOMIC_AND(ptr, val)
-    U8G_ATOMIC_START()
-    U8G_ATOMIC_END()
- 
-
-
-*/
-
-#include "u8g.h"
-
-
-
-#if defined(U8G_RASPBERRY_PI)
-
-#include <wiringPiSPI.h>
-#include <wiringPi.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-
-uint8_t u8g_com_raspberrypi_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
-{
-  switch(msg)
-  {
-    case U8G_COM_MSG_STOP:
-      break;
-    
-    case U8G_COM_MSG_INIT:
-		// check wiringPi setup
-		if (wiringPiSetup() == -1)
-		{
-			printf("wiringPi-Error\n");
-			exit(1);
-		}
-
-		if (wiringPiSPISetup (0, 100000) < 0)
-		{
-			printf ("Unable to open SPI device 0: %s\n", strerror (errno)) ;
-			exit (1) ;
-		}
-		
-		u8g_SetPIOutput(u8g, U8G_PI_RESET);
-		u8g_SetPIOutput(u8g, U8G_PI_A0);
-
-      break;
-    
-    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
-	  u8g_SetPILevel(u8g, U8G_PI_A0, arg_val);
-      break;
-
-    case U8G_COM_MSG_CHIP_SELECT:
-		/* Done by the SPI hardware */
-      break;
-      
-    case U8G_COM_MSG_RESET:
-      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
-      break;
-    
-    case U8G_COM_MSG_WRITE_BYTE:
-		wiringPiSPIDataRW (0, &arg_val, 1) ;
-      break;
-    
-    case U8G_COM_MSG_WRITE_SEQ:
-		wiringPiSPIDataRW (0, arg_ptr, arg_val);
-      break;
-
-	case U8G_COM_MSG_WRITE_SEQ_P:
-		wiringPiSPIDataRW (0, arg_ptr, arg_val);		
-      break;
-  }
-  return 1;
-}
-
-#else
-
-uint8_t u8g_com_raspberrypi_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
-{
-  return 1;
-}
-
-#endif
-
-
-