File content as of revision 1:9db0e321a9f4:

/*
 * Copyright (c) 2018-2019, Arm Limited and affiliates.
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef USBDESCRIPTOR_H
#define USBDESCRIPTOR_H

/* Standard descriptor types */
#define DEVICE_DESCRIPTOR        (1)
#define CONFIGURATION_DESCRIPTOR (2)
#define STRING_DESCRIPTOR        (3)
#define INTERFACE_DESCRIPTOR     (4)
#define ENDPOINT_DESCRIPTOR      (5)
#define QUALIFIER_DESCRIPTOR     (6)

/* Standard descriptor lengths */
#define DEVICE_DESCRIPTOR_LENGTH        (0x12)
#define CONFIGURATION_DESCRIPTOR_LENGTH (0x09)
#define INTERFACE_DESCRIPTOR_LENGTH     (0x09)
#define ENDPOINT_DESCRIPTOR_LENGTH      (0x07)


/*string offset*/
#define STRING_OFFSET_LANGID            (0)
#define STRING_OFFSET_IMANUFACTURER     (1)
#define STRING_OFFSET_IPRODUCT          (2)
#define STRING_OFFSET_ISERIAL           (3)
#define STRING_OFFSET_ICONFIGURATION    (4)
#define STRING_OFFSET_IINTERFACE        (5)

/* USB Specification Release Number */
#define USB_VERSION_2_0 (0x0200)

/* Least/Most significant byte of short integer */
#define LSB(n)  ((n)&0xff)
#define MSB(n)  (((n)&0xff00)>>8)

/* bmAttributes in configuration descriptor */
/* C_RESERVED must always be set */
#define C_RESERVED      (1U<<7)
#define C_SELF_POWERED  (1U<<6)
#define C_REMOTE_WAKEUP (1U<<5)

/* bMaxPower in configuration descriptor */
#define C_POWER(mA)     ((mA)/2)

/* bmAttributes in endpoint descriptor */
#define E_CONTROL       (0x00)
#define E_ISOCHRONOUS   (0x01)
#define E_BULK          (0x02)
#define E_INTERRUPT     (0x03)

/* For isochronous endpoints only: */
#define E_NO_SYNCHRONIZATION    (0x00)
#define E_ASYNCHRONOUS          (0x04)
#define E_ADAPTIVE              (0x08)
#define E_SYNCHRONOUS           (0x0C)
#define E_DATA                  (0x00)
#define E_FEEDBACK              (0x10)
#define E_IMPLICIT_FEEDBACK     (0x20)

#endif