Diff: features/FEATURE_BLE/ble/pal/GapEvents.h

Revision:

0:5b88d5760320

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/features/FEATURE_BLE/ble/pal/GapEvents.h	Tue Dec 17 23:23:45 2019 +0000
@@ -0,0 +1,520 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2017-2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef BLE_PAL_GAP_MESSAGE_H_
+#define BLE_PAL_GAP_MESSAGE_H_
+
+#include "GapTypes.h"
+#include "ble/BLETypes.h"
+
+namespace ble {
+namespace pal {
+
+/**
+ * Enumeration of GAP event types
+ */
+struct GapEventType : SafeEnum<GapEventType, uint8_t> {
+    enum type {
+        /**
+         * Event type used by GapUnexpectedErrorEvent
+         */
+        UNEXPECTED_ERROR,
+
+        /**
+         * Event type used by GapConnectionCompleteEvent
+         */
+        CONNECTION_COMPLETE,
+
+        /**
+         * Event type used by GapAdvertisingReportEvent
+         */
+        ADVERTISING_REPORT,
+
+        /**
+         * Event type used by GapConnectionUpdateEvent
+         * */
+        CONNECTION_UPDATE,
+
+        /**
+         * Event type used by GapRemoteConnectionParameterRequestEvent
+         */
+        REMOTE_CONNECTION_PARAMETER_REQUEST,
+
+        /**
+         * Event type used by GapDisconnectionCompleteEvent
+         */
+        DISCONNECTION_COMPLETE
+    };
+
+    GapEventType(type event_type) : SafeEnum<GapEventType, uint8_t>(event_type) { }
+};
+
+
+/**
+ * Base class of a Gap Event.
+ *
+ * Client should use the field type to deduce the actual type of the event.
+ */
+struct GapEvent {
+
+    const GapEventType type;
+
+protected:
+    GapEvent(GapEventType type) : type(type) { }
+
+    // Disable copy construction and copy assignement operations.
+    GapEvent(const GapEvent&);
+    GapEvent& operator=(const GapEvent&);
+};
+
+
+/**
+ * Model an unexpected error that happen during a gap procedure.
+ *
+ * This class is mainly used to notify user code of an unexpected error returned
+ * in an HCI command complete event.
+ */
+struct GapUnexpectedErrorEvent : public GapEvent {
+    GapUnexpectedErrorEvent(uint16_t opcode, uint8_t error_code) :
+        GapEvent(GapEventType::UNEXPECTED_ERROR),
+        opcode(opcode), error_code(error_code) { }
+
+    /**
+     * Opcode composed of the OCF and OGF of the command which has returned an
+     * error.
+     */
+    const uint16_t opcode;
+
+    /**
+     * Error code
+     */
+    const uint8_t error_code;
+};
+
+
+/**
+ * Indicate to both ends (slave or master) the end of the connection process.
+ *
+ * This structure should be used for Connection Complete Events and Enhanced
+ * Connection Complete Event.
+ *
+ * @note: See Bluetooth 5 Vol 2 PartE: 7.7.65.1 LE Connection Complete Event
+ * @note: See Bluetooth 5 Vol 2 PartE: 7.7.65.10 LE Enhanced Connection
+ */
+struct GapConnectionCompleteEvent : public GapEvent {
+    /**
+     * Construct a new GapConnectionCompleteEvent.
+     *
+     * @param status Status of the operation: 0x00 in case of success otherwise
+     * the error code associated with the failure.
+     *
+     * @param connection_handle handle of the connection created. This handle
+     * will be used to address the connection in any connection oriented
+     * operation.
+     *
+     * @param role Role of the LE subsystem in the connection.
+     *
+     * @param address_type Type of address used by the peer for this connection.
+     *
+     * @param address Address of the peer used to establish the connection.
+     *
+     * @param connection_interval Connection interval used on this connection.
+     * It shall be in a range [0x0006 : 0x0C80]. A unit is equal to 1.25ms.
+     *
+     * @param connection_latency Number of connection events the slave can
+     * drop.
+     *
+     * @param supervision_timeout Supervision timeout of the connection. It
+     * shall be in the range [0x000A : 0x0C80] where a unit represent 10ms.
+     *
+     * @note: See Bluetooth 5 Vol 2 PartE: 7.7.65.10 LE Enhanced Connection
+     * Complete Event
+     */
+    GapConnectionCompleteEvent(
+        uint8_t status,
+        connection_handle_t connection_handle,
+        connection_role_t role,
+        advertising_peer_address_type_t peer_address_type,
+        const address_t& peer_address,
+        uint16_t connection_interval,
+        uint16_t connection_latency,
+        uint16_t supervision_timeout
+    ) :
+        GapEvent(GapEventType::CONNECTION_COMPLETE),
+        status(status),
+        connection_handle(connection_handle),
+        role(role),
+        peer_address_type(
+            peer_address_type == advertising_peer_address_type_t::PUBLIC ?
+                peer_address_type_t::PUBLIC :
+                peer_address_type_t::RANDOM
+        ),
+        peer_address(peer_address),
+        connection_interval(connection_interval),
+        connection_latency(connection_latency),
+        supervision_timeout(supervision_timeout),
+        local_resolvable_private_address(),
+        peer_resolvable_private_address() {
+    }
+
+    /**
+     * Construct a new GapConnectionCompleteEvent.
+     *
+     * @param status Status of the operation: 0x00 in case of success otherwise
+     * the error code associated with the failure.
+     *
+     * @param connection_handle handle of the connection created. This handle
+     * will be used to address the connection in any connection oriented
+     * operation.
+     *
+     * @param role Role of the LE subsystem in the connection.
+     *
+     * @param address_type Type of address used by the peer for this connection.
+     *
+     * @param address Address of the peer used to establish the connection.
+     *
+     * @param connection_interval Connection interval used on this connection.
+     * It shall be in a range [0x0006 : 0x0C80]. A unit is equal to 1.25ms.
+     *
+     * @param connection_latency Number of connection events the slave can
+     * drop.
+     *
+     * @param supervision_timeout Supervision timeout of the connection. It
+     * shall be in the range [0x000A : 0x0C80] where a unit represent 10ms.
+     *
+     * @param local_resolvable_private_address Resolvable private address used
+     * by the local device to establish the connection.
+     *
+     * @param peer_resolvable_private_address Resolvable private address used
+     * by the peer to establish the connection.
+     *
+     * @note: See Bluetooth 5 Vol 2 PartE: 7.7.65.10 LE Enhanced Connection
+     * Complete Event
+     */
+    GapConnectionCompleteEvent(
+        uint8_t status,
+        connection_handle_t connection_handle,
+        connection_role_t role,
+        peer_address_type_t peer_address_type,
+        const address_t& peer_address,
+        uint16_t connection_interval,
+        uint16_t connection_latency,
+        uint16_t supervision_timeout,
+        const address_t& local_resolvable_private_address,
+        const address_t& peer_resolvable_private_address
+    ) :
+        GapEvent(GapEventType::CONNECTION_COMPLETE),
+        status(status),
+        connection_handle(connection_handle),
+        role(role),
+        peer_address_type(peer_address_type),
+        peer_address(peer_address),
+        connection_interval(connection_interval),
+        connection_latency(connection_latency),
+        supervision_timeout(supervision_timeout),
+        local_resolvable_private_address(local_resolvable_private_address),
+        peer_resolvable_private_address(peer_resolvable_private_address) {
+    }
+
+
+    /*
+     * @param status Indicate if the connection succesfully completed or not:
+     *   - 0: Connection successfuly completed
+     *   - [0x01 : 0xFF] Connection failed to complete, the value represent
+     *     the code for the error.
+     */
+    const uint8_t status;
+
+    /**
+     * Handle of the connection created, valid if status is equal to 0.
+     * @attention Valid if status is equal to 0.
+     */
+    const connection_handle_t connection_handle;
+
+    /**
+     * Role of the device in the connection
+     * @attention Valid if status is equal to 0.
+     */
+    const connection_role_t role;
+
+    /**
+     * Peer address type.
+     */
+    const peer_address_type_t peer_address_type;
+
+    /**
+     * Peer address.
+     */
+    const address_t peer_address;
+
+    /**
+     * Connection interval used in this connection.
+     * It shall be in a range [0x0006 : 0x0C80]. A unit is equal to 1.25ms.
+     */
+    const uint16_t connection_interval;
+
+    /**
+     * Number of connection events the slave can drop.
+     */
+    const uint16_t connection_latency;
+
+    /**
+     * Supervision timeout of the connection
+     * It shall be in the range [0x000A : 0x0C80] where a unit represent 10ms.
+     */
+    const uint16_t supervision_timeout;
+
+    /**
+     * Resolvable private address of the local device.
+     * Set to all 0 if not available.
+     */
+    const address_t local_resolvable_private_address;
+
+    /**
+     * Resolvable private address of the peer.
+     * Set to all 0 if not available.     *
+     */
+    const address_t peer_resolvable_private_address;
+};
+
+
+/**
+ * Report advertising from one or more LE device.
+ *
+ * @attention This class has to be implemented by the BLE port.
+ *
+ * @note: See Bluetooth 5 Vol 2 PartE: 7.7.65.2 LE Advertising Report Event
+ */
+struct GapAdvertisingReportEvent : public GapEvent {
+
+    /**
+     * POD representing an advertising captured by the LE subsystem.
+     */
+    struct advertising_t {
+        received_advertising_type_t type;
+        connection_peer_address_type_t address_type;
+        address_t address;
+        Span<const uint8_t> data;
+        int8_t rssi;
+    };
+
+    GapAdvertisingReportEvent() : GapEvent(GapEventType::ADVERTISING_REPORT) { }
+
+    virtual ~GapAdvertisingReportEvent() { }
+
+    /**
+     * Count of advertising in this event.
+     */
+    virtual uint8_t size() const = 0;
+
+    /**
+     * Access the advertising at index i.
+     */
+    virtual advertising_t operator[](uint8_t i) const = 0;
+};
+
+
+/**
+ * Indicates the connection update process completion.
+ *
+ * If no parameters are updated after a connection update request from the peer
+ * then this event shall not be emmited.
+ *
+ * @note: See Bluetooth 5 Vol 2 PartE: 7.7.65.3 LE Connection Update Complete
+ * Event.
+ */
+struct GapConnectionUpdateEvent : public GapEvent {
+
+    /**
+     * Construct a connection update event for a successful process.
+     *
+     * @param status Status of the connection update event operation. If equal
+     * to 0x00 then the process was successful, otherwise the status indicates
+     * the reason of the faillure.
+     *
+     * @param connection_handle Handle of the connection updated.
+     *
+     * @param connection_interval New connection interval used by the connection.
+     *
+     * @param Connection_latency New connection latency used by the connection.
+     *
+     * @param supervision_timeout New connection supervision timeout.
+     */
+    GapConnectionUpdateEvent(
+        uint8_t status,
+        connection_handle_t connection_handle,
+        uint16_t connection_interval,
+        uint16_t connection_latency,
+        uint16_t supervision_timeout
+    ) :
+        GapEvent(GapEventType::CONNECTION_UPDATE),
+        status(status),
+        connection_handle(connection_handle),
+        connection_interval(connection_interval),
+        connection_latency(connection_latency),
+        supervision_timeout(supervision_timeout) {
+    }
+
+    /**
+     * If equal to 0, the connection update has succesfully completed otherwise
+     * the process has failled and this field represent the error associated to
+     * the faillure.
+     */
+    const uint8_t status;
+
+    /**
+     * Handle of the connection which has completed the connection update
+     * process.
+     */
+    const connection_handle_t connection_handle;
+
+    /**
+     * New connection interval used by the connection.
+     * It shall be in a range [0x0006 : 0x0C80]. A unit is equal to 1.25ms.
+     */
+    const uint16_t connection_interval;
+
+    /*
+     * New number of connection events the slave can drop.
+     */
+    const uint16_t connection_latency;
+
+    /*
+     * New supervision timeout of the connection.
+     * It shall be in the range [0x000A : 0x0C80] where a unit represent 10ms.
+     */
+    const uint16_t supervision_timeout;
+};
+
+
+/**
+ * indicate a request from the peer to change the connection parameters.
+ *
+ * @note: See Bluetooth 5 Vol 2 PartE: 7.7.65.6 LE Remote Connection Parameter
+ * Request Event.
+ */
+struct GapRemoteConnectionParameterRequestEvent : public GapEvent {
+    /**
+     * Construct a new remote connection parameter request event.
+     *
+     * @param connection_handle Handle of the connection with the peer
+     * requesting the parameter update
+     *
+     * @param min_connection_interval Minimum value of the connection interval
+     * requested by the peer.
+     *
+     * @param max_connection_interval Maximum value of the connection interval
+     * requested by the peer.
+     *
+     * @param connection_latency Slave latency requested by the peer.
+     *
+     * @param supervision_timeout Supervision timeout requested by the peer.
+     */
+    GapRemoteConnectionParameterRequestEvent(
+        connection_handle_t connection_handle,
+        uint16_t min_connection_interval,
+        uint16_t max_connection_interval,
+        uint16_t connection_latency,
+        uint16_t supervision_timeout
+    ) : GapEvent(GapEventType::REMOTE_CONNECTION_PARAMETER_REQUEST),
+        connection_handle(connection_handle),
+        min_connection_interval(min_connection_interval),
+        max_connection_interval(max_connection_interval),
+        connection_latency(connection_latency),
+        supervision_timeout(supervision_timeout) {
+    }
+
+    /**
+     * Handle of the connection with the peer requesting the parameter update.
+     */
+    const connection_handle_t connection_handle;
+
+    /**
+     * Minimum value of the connection interval requested by the peer.
+     * It shall be in a range [0x0006 : 0x0C80]. A unit is equal to 1.25ms.
+     */
+    const uint16_t min_connection_interval;
+
+    /**
+     * Maximum value of the connection interval requested by the peer.
+     * It shall be in a range [0x0006 : 0x0C80]. A unit is equal to 1.25ms.
+     */
+    const uint16_t max_connection_interval;
+
+    /*
+     * Slave latency requested by the peer.
+     */
+    const uint16_t connection_latency;
+
+    /*
+     * Supervision timeout requested by the peer.
+     * It shall be in the range [0x000A : 0x0C80] where a unit represent 10ms.
+     */
+    const uint16_t supervision_timeout;
+};
+
+
+/**
+ * Indicate the end of a disconnection process.
+ *
+ * @note: See Bluetooth 5 Vol 2 PartE: 7.7.5 Disconnection Complete Event.
+ */
+struct GapDisconnectionCompleteEvent : public GapEvent {
+    /**
+     * Construct a disconnection complete event.
+     *
+     * @param status Status of the procedure. If equal to 0 then the
+     * disconnection process complete successfully. Otherwise it represents the
+     * error code associated with the faillure.
+     *
+     * @param connection_handle Handle of the connection disconnected.
+     *
+     * @param reason Reason of the disconnection
+     */
+    GapDisconnectionCompleteEvent(
+        uint8_t status,
+        connection_handle_t connection_handle,
+        uint8_t reason
+    ) : GapEvent(GapEventType::DISCONNECTION_COMPLETE),
+        status(status),
+        connection_handle(connection_handle),
+        reason(reason) {
+    }
+
+    /**
+     * Status of the procedure. If equal to 0 then the procedure was a success
+     * otherwise this variable contains the error code associated with the
+     * faillure.
+     */
+    const uint8_t status;
+
+    /**
+     * Handle of the connection used for the procedure.
+     */
+    const connection_handle_t connection_handle;
+
+    /**
+     * Reason for disconnection.
+     *
+     * @attention ignored in case of faillure.
+     */
+    const uint8_t reason;
+};
+
+} // namespace pal
+} // namespace ble
+
+#endif /* BLE_PAL_GAP_MESSAGE_H_ */