mbed library sources, mbed-dev only for TYBLE16

Fork of mbed-dev by mbed official

Please refer flowing link.
/users/kenjiArai/notebook/tyble16-module-will-become-a-mbed-family--mbedliza/

drivers/InterruptIn.cpp

Committer:
<>
Date:
2017-03-14
Revision:
160:d5399cc887bb
Parent:
149:156823d33999
Child:
175:af195413fb11

File content as of revision 160:d5399cc887bb:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "drivers/InterruptIn.h"

#if DEVICE_INTERRUPTIN

namespace mbed {

static void donothing() {}

InterruptIn::InterruptIn(PinName pin) : gpio(),
                                        gpio_irq(),
                                        _rise(),
                                        _fall() {
    // No lock needed in the constructor

    _rise = donothing;
    _fall = donothing;

    gpio_irq_init(&gpio_irq, pin, (&InterruptIn::_irq_handler), (uint32_t)this);
    gpio_init_in(&gpio, pin);
}

InterruptIn::~InterruptIn() {
    // No lock needed in the destructor
    gpio_irq_free(&gpio_irq);
}

int InterruptIn::read() {
    // Read only
    return gpio_read(&gpio);
}

void InterruptIn::mode(PinMode pull) {
    core_util_critical_section_enter();
    gpio_mode(&gpio, pull);
    core_util_critical_section_exit();
}

void InterruptIn::rise(Callback<void()> func) {
    core_util_critical_section_enter();
    if (func) {
        _rise = func;
        gpio_irq_set(&gpio_irq, IRQ_RISE, 1);
    } else {
        _rise = donothing;
        gpio_irq_set(&gpio_irq, IRQ_RISE, 0);
    }
    core_util_critical_section_exit();
}

void InterruptIn::fall(Callback<void()> func) {
    core_util_critical_section_enter();
    if (func) {
        _fall = func;
        gpio_irq_set(&gpio_irq, IRQ_FALL, 1);
    } else {
        _fall = donothing;
        gpio_irq_set(&gpio_irq, IRQ_FALL, 0);
    }
    core_util_critical_section_exit();
}

void InterruptIn::_irq_handler(uint32_t id, gpio_irq_event event) {
    InterruptIn *handler = (InterruptIn*)id;
    switch (event) {
        case IRQ_RISE: handler->_rise(); break;
        case IRQ_FALL: handler->_fall(); break;
        case IRQ_NONE: break;
    }
}

void InterruptIn::enable_irq() {
    core_util_critical_section_enter();
    gpio_irq_enable(&gpio_irq);
    core_util_critical_section_exit();
}

void InterruptIn::disable_irq() {
    core_util_critical_section_enter();
    gpio_irq_disable(&gpio_irq);
    core_util_critical_section_exit();
}

InterruptIn::operator int() {
    // Underlying call is atomic
    return read();
}

} // namespace mbed

#endif