mbed library sources, mbed-dev only for TYBLE16
Fork of mbed-dev by
Please refer flowing link.
/users/kenjiArai/notebook/tyble16-module-will-become-a-mbed-family--mbedliza/
Diff: platform/mbed_application.c
- Revision:
- 160:d5399cc887bb
- Child:
- 173:e131a1973e81
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/platform/mbed_application.c Tue Mar 14 16:40:56 2017 +0000 @@ -0,0 +1,127 @@ +/* mbed Microcontroller Library + * Copyright (c) 2017-2017 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include <stdlib.h> +#include <stdarg.h> +#include "device.h" +#include "platform/mbed_application.h" + +#if MBED_APPLICATION_SUPPORT + +static void powerdown_nvic(void); +static void powerdown_scb(uint32_t vtor); +static void start_new_application(void *sp, void *pc); + +void mbed_start_application(uintptr_t address) +{ + void *sp; + void *pc; + + // Interrupts are re-enabled in start_new_application + __disable_irq(); + + SysTick->CTRL = 0x00000000; + powerdown_nvic(); + powerdown_scb(address); + + sp = *((void**)address + 0); + pc = *((void**)address + 1); + start_new_application(sp, pc); +} + +static void powerdown_nvic() +{ + int isr_count; + int i; + int j; + + isr_count = (SCnSCB->ICTR & SCnSCB_ICTR_INTLINESNUM_Msk) >> SCnSCB_ICTR_INTLINESNUM_Pos; + for (i = 0; i < isr_count; i++) { + NVIC->ICER[i] = 0xFFFFFFFF; + NVIC->ICPR[i] = 0xFFFFFFFF; + for (j = 0; j < 8; j++) { + NVIC->IP[i * 8 + j] = 0x00000000; + } + } +} + +static void powerdown_scb(uint32_t vtor) +{ + int i; + + // SCB->CPUID - Read only CPU ID register + SCB->ICSR = SCB_ICSR_PENDSVCLR_Msk | SCB_ICSR_PENDSTCLR_Msk; + SCB->VTOR = vtor; + SCB->AIRCR = 0x05FA | 0x0000; + SCB->SCR = 0x00000000; + // SCB->CCR - Implementation defined value + for (i = 0; i < 12; i++) { +#if defined(__CORTEX_M7) + SCB->SHPR[i] = 0x00; +#else + SCB->SHP[i] = 0x00; +#endif + } + SCB->SHCSR = 0x00000000; + SCB->CFSR = 0xFFFFFFFF; + SCB->HFSR = SCB_HFSR_DEBUGEVT_Msk | SCB_HFSR_FORCED_Msk | SCB_HFSR_VECTTBL_Msk; + SCB->DFSR = SCB_DFSR_EXTERNAL_Msk | SCB_DFSR_VCATCH_Msk | + SCB_DFSR_DWTTRAP_Msk | SCB_DFSR_BKPT_Msk | SCB_DFSR_HALTED_Msk; + // SCB->MMFAR - Implementation defined value + // SCB->BFAR - Implementation defined value + // SCB->AFSR - Implementation defined value + // SCB->PFR - Read only processor feature register + // SCB->DFR - Read only debug feature registers + // SCB->ADR - Read only auxiliary feature registers + // SCB->MMFR - Read only memory model feature registers + // SCB->ISAR - Read only instruction set attribute registers + // SCB->CPACR - Implementation defined value +} + +#if defined (__CC_ARM) + +__asm static void start_new_application(void *sp, void *pc) +{ + MOV R2, #0 + MSR CONTROL, R2 // Switch to main stack + MOV SP, R0 + MSR PRIMASK, R2 // Enable interrupts + BX R1 +} + +#elif defined (__GNUC__) || defined (__ICCARM__) + +void start_new_application(void *sp, void *pc) +{ + __asm volatile ( + "mov r2, #0 \n" + "msr control, r2 \n" // Switch to main stack + "mov sp, %0 \n" + "msr primask, r2 \n" // Enable interrupts + "bx %1 \n" + : + : "l" (sp), "l" (pc) + : "r2", "cc", "memory" + ); +} + +#else + +#error "Unsupported toolchain" + +#endif + +#endif /* MBED_APPLICATION_SUPPORT */