Kenji Arai / mbed-dev4BLE

mbed library sources, mbed-dev only for TYBLE16

Fork of mbed-dev by mbed official

Please refer flowing link.
/users/kenjiArai/notebook/tyble16-module-will-become-a-mbed-family--mbedliza/

drivers/Ethernet.h@182:976b131d2800, 2018-02-25 (annotated)

Committer:
kenjiArai
Date:
Sun Feb 25 02:00:51 2018 +0000
Revision:
182:976b131d2800
Parent:
168:9672193075cf 
Only for TYBLE16

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /* mbed Microcontroller Library
<> 149:156823d33999 2 * Copyright (c) 2006-2013 ARM Limited
<> 149:156823d33999 3 *
<> 149:156823d33999 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 149:156823d33999 5 * you may not use this file except in compliance with the License.
<> 149:156823d33999 6 * You may obtain a copy of the License at
<> 149:156823d33999 7 *
<> 149:156823d33999 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 149:156823d33999 9 *
<> 149:156823d33999 10 * Unless required by applicable law or agreed to in writing, software
<> 149:156823d33999 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 149:156823d33999 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 149:156823d33999 13 * See the License for the specific language governing permissions and
<> 149:156823d33999 14 * limitations under the License.
<> 149:156823d33999 15 */
<> 149:156823d33999 16 #ifndef MBED_ETHERNET_H
<> 149:156823d33999 17 #define MBED_ETHERNET_H
<> 149:156823d33999 18
<> 149:156823d33999 19 #include "platform/platform.h"
AnnaBridge 168:9672193075cf 20 #include "platform/NonCopyable.h"
<> 149:156823d33999 21
AnnaBridge 167:e84263d55307 22 #if defined (DEVICE_ETHERNET) || defined(DOXYGEN_ONLY)
<> 149:156823d33999 23
<> 149:156823d33999 24 namespace mbed {
<> 149:156823d33999 25 /** \addtogroup drivers */
<> 149:156823d33999 26
<> 149:156823d33999 27 /** An ethernet interface, to use with the ethernet pins.
<> 149:156823d33999 28 *
AnnaBridge 167:e84263d55307 29 * @note Synchronization level: Not protected
<> 149:156823d33999 30 *
<> 149:156823d33999 31 * Example:
<> 149:156823d33999 32 * @code
<> 149:156823d33999 33 * // Read destination and source from every ethernet packet
<> 149:156823d33999 34 *
<> 149:156823d33999 35 * #include "mbed.h"
<> 149:156823d33999 36 *
<> 149:156823d33999 37 * Ethernet eth;
<> 149:156823d33999 38 *
<> 149:156823d33999 39 * int main() {
<> 149:156823d33999 40 * char buf[0x600];
<> 149:156823d33999 41 *
<> 149:156823d33999 42 * while(1) {
<> 149:156823d33999 43 * int size = eth.receive();
<> 149:156823d33999 44 * if(size > 0) {
<> 149:156823d33999 45 * eth.read(buf, size);
<> 149:156823d33999 46 * printf("Destination: %02X:%02X:%02X:%02X:%02X:%02X\n",
<> 149:156823d33999 47 * buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
<> 149:156823d33999 48 * printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
<> 149:156823d33999 49 * buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
<> 149:156823d33999 50 * }
<> 149:156823d33999 51 *
<> 149:156823d33999 52 * wait(1);
<> 149:156823d33999 53 * }
<> 149:156823d33999 54 * }
<> 149:156823d33999 55 * @endcode
AnnaBridge 167:e84263d55307 56 * @ingroup drivers
<> 149:156823d33999 57 */
AnnaBridge 168:9672193075cf 58 class Ethernet : private NonCopyable<Ethernet> {
<> 149:156823d33999 59
<> 149:156823d33999 60 public:
<> 149:156823d33999 61
<> 149:156823d33999 62 /** Initialise the ethernet interface.
<> 149:156823d33999 63 */
<> 149:156823d33999 64 Ethernet();
<> 149:156823d33999 65
<> 149:156823d33999 66 /** Powers the hardware down.
<> 149:156823d33999 67 */
<> 149:156823d33999 68 virtual ~Ethernet();
<> 149:156823d33999 69
<> 149:156823d33999 70 enum Mode {
<> 149:156823d33999 71 AutoNegotiate,
<> 149:156823d33999 72 HalfDuplex10,
<> 149:156823d33999 73 FullDuplex10,
<> 149:156823d33999 74 HalfDuplex100,
<> 149:156823d33999 75 FullDuplex100
<> 149:156823d33999 76 };
<> 149:156823d33999 77
<> 149:156823d33999 78 /** Writes into an outgoing ethernet packet.
<> 149:156823d33999 79 *
<> 149:156823d33999 80 * It will append size bytes of data to the previously written bytes.
<> 149:156823d33999 81 *
<> 149:156823d33999 82 * @param data An array to write.
<> 149:156823d33999 83 * @param size The size of data.
<> 149:156823d33999 84 *
<> 149:156823d33999 85 * @returns
<> 149:156823d33999 86 * The number of written bytes.
<> 149:156823d33999 87 */
<> 149:156823d33999 88 int write(const char *data, int size);
<> 149:156823d33999 89
<> 149:156823d33999 90 /** Send an outgoing ethernet packet.
<> 149:156823d33999 91 *
<> 149:156823d33999 92 * After filling in the data in an ethernet packet it must be send.
<> 149:156823d33999 93 * Send will provide a new packet to write to.
<> 149:156823d33999 94 *
<> 149:156823d33999 95 * @returns
<> 149:156823d33999 96 * 0 if the sending was failed,
<> 149:156823d33999 97 * or the size of the packet successfully sent.
<> 149:156823d33999 98 */
<> 149:156823d33999 99 int send();
<> 149:156823d33999 100
<> 149:156823d33999 101 /** Recevies an arrived ethernet packet.
<> 149:156823d33999 102 *
<> 149:156823d33999 103 * Receiving an ethernet packet will drop the last received ethernet packet
<> 149:156823d33999 104 * and make a new ethernet packet ready to read.
<> 149:156823d33999 105 * If no ethernet packet is arrived it will return 0.
<> 149:156823d33999 106 *
<> 149:156823d33999 107 * @returns
<> 149:156823d33999 108 * 0 if no ethernet packet is arrived,
<> 149:156823d33999 109 * or the size of the arrived packet.
<> 149:156823d33999 110 */
<> 149:156823d33999 111 int receive();
<> 149:156823d33999 112
<> 149:156823d33999 113 /** Read from an recevied ethernet packet.
<> 149:156823d33999 114 *
AnnaBridge 167:e84263d55307 115 * After receive returned a number bigger than 0 it is
<> 149:156823d33999 116 * possible to read bytes from this packet.
<> 149:156823d33999 117 *
AnnaBridge 167:e84263d55307 118 * @param data Pointer to data packet
AnnaBridge 167:e84263d55307 119 * @param size Size of data to be read.
AnnaBridge 167:e84263d55307 120 * @returns The number of byte read.
AnnaBridge 167:e84263d55307 121 *
AnnaBridge 167:e84263d55307 122 * @note It is possible to use read multiple times.
<> 149:156823d33999 123 * Each time read will start reading after the last read byte before.
<> 149:156823d33999 124 *
<> 149:156823d33999 125 */
<> 149:156823d33999 126 int read(char *data, int size);
<> 149:156823d33999 127
<> 149:156823d33999 128 /** Gives the ethernet address of the mbed.
<> 149:156823d33999 129 *
<> 149:156823d33999 130 * @param mac Must be a pointer to a 6 byte char array to copy the ethernet address in.
<> 149:156823d33999 131 */
<> 149:156823d33999 132 void address(char *mac);
<> 149:156823d33999 133
<> 149:156823d33999 134 /** Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
<> 149:156823d33999 135 *
<> 149:156823d33999 136 * @returns
<> 149:156823d33999 137 * 0 if no ethernet link is pressent,
<> 149:156823d33999 138 * 1 if an ethernet link is pressent.
<> 149:156823d33999 139 *
<> 149:156823d33999 140 * Example:
<> 149:156823d33999 141 * @code
<> 149:156823d33999 142 * // Using the Ethernet link function
<> 149:156823d33999 143 * #include "mbed.h"
<> 149:156823d33999 144 *
<> 149:156823d33999 145 * Ethernet eth;
<> 149:156823d33999 146 *
<> 149:156823d33999 147 * int main() {
<> 149:156823d33999 148 * wait(1); // Needed after startup.
<> 149:156823d33999 149 * if (eth.link()) {
<> 149:156823d33999 150 * printf("online\n");
<> 149:156823d33999 151 * } else {
<> 149:156823d33999 152 * printf("offline\n");
<> 149:156823d33999 153 * }
<> 149:156823d33999 154 * }
<> 149:156823d33999 155 * @endcode
<> 149:156823d33999 156 */
<> 149:156823d33999 157 int link();
<> 149:156823d33999 158
<> 149:156823d33999 159 /** Sets the speed and duplex parameters of an ethernet link
<> 149:156823d33999 160 *
<> 149:156823d33999 161 * - AutoNegotiate Auto negotiate speed and duplex
<> 149:156823d33999 162 * - HalfDuplex10 10 Mbit, half duplex
<> 149:156823d33999 163 * - FullDuplex10 10 Mbit, full duplex
<> 149:156823d33999 164 * - HalfDuplex100 100 Mbit, half duplex
<> 149:156823d33999 165 * - FullDuplex100 100 Mbit, full duplex
<> 149:156823d33999 166 *
<> 149:156823d33999 167 * @param mode the speed and duplex mode to set the link to:
<> 149:156823d33999 168 */
<> 149:156823d33999 169 void set_link(Mode mode);
<> 149:156823d33999 170 };
<> 149:156823d33999 171
<> 149:156823d33999 172 } // namespace mbed
<> 149:156823d33999 173
<> 149:156823d33999 174 #endif
<> 149:156823d33999 175
<> 149:156823d33999 176 #endif