Diff: 2_EddyStoneBeacon/main.cpp

Revision:

1:9011c83e4178

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/2_EddyStoneBeacon/main.cpp	Sat Apr 14 04:56:34 2018 +0000
@@ -0,0 +1,165 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ *  /////// Works well on TYBLE16 Module ///////
+ *  Modified by Kenji Arai
+ *      http://www.page.sannet.ne.jp/kenjia/index.html
+ *      https://os.mbed.com/users/kenjiArai/
+ *
+ *      Started:  Feburary   18th, 2018
+ *      Revised:  April      14th, 2018
+ *
+ *  Original:
+ *      nRF51822_SimpleControls
+ *      https://developer.mbed.org/teams
+ *                      /Bluetooth-Low-Energy/code/BLE_EddystoneBeacon_Service/
+ *  Tested Controller Device:
+ *      iPhone6 Physical Web (PhyWeb) By Viet Hoa Dinh
+ *      https://itunes.apple.com/us/app/physical-web/id927653608?mt=8
+ */
+
+//#define EXAMPLE_2_EDDYSTONE_BEACON
+#ifdef EXAMPLE_2_EDDYSTONE_BEACON
+
+//  Include --------------------------------------------------------------------
+#include "mbed.h"
+#include "TYBLE16_BASE.h"
+#include "BLE.h"
+//#include "EddystoneService.h"
+#include "../Eddystone/EddystoneService.h"
+
+//  Object ---------------------------------------------------------------------
+DigitalOut  led(P0_5);
+Serial      pc(USBTX, USBRX);
+
+//  Definition -----------------------------------------------------------------
+
+//  RAM ------------------------------------------------------------------------
+EddystoneService    *eddyServicePtr;
+Gap::Address_t      my_mac;
+
+//  ROM / Constant data --------------------------------------------------------
+char *const opngmsg =
+    "\x1b[2J\x1b[H"__FILE__ "\r\n"__DATE__ " " __TIME__ " (UTC)\r\n""\r\n";
+
+//  Function prototypes --------------------------------------------------------
+int8_t check_dice(void);
+uint16_t update_vdd(uint16_t x);
+uint16_t update_temp(uint16_t x);
+void onBleInitError(BLE::InitializationCompleteCallbackContext* initContext);
+void bleInitComplete(BLE::InitializationCompleteCallbackContext* initContext);
+
+//------------------------------------------------------------------------------
+//  Control Program
+//------------------------------------------------------------------------------
+// !!!!!!!! Please select number of 0 to 6 !!!!!!!!!!!!!!!!!
+int8_t check_dice(void)
+{
+    return 5;
+}
+
+void bleInitComplete(BLE::InitializationCompleteCallbackContext* initContext)
+{
+    BLE         &ble  = initContext->ble;
+    ble_error_t error = initContext->error;
+
+    if (error != BLE_ERROR_NONE) {
+        onBleInitError(initContext);
+        return;
+    }
+    // Set UID and TLM frame data
+    const UIDNamespaceID_t uidNamespaceID =
+    {0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99};
+    const UIDInstanceID_t  uidInstanceID  =
+    {0xAA, 0xBB, 0xCC, 0xDD, 0xEE, 0xFF};
+    uint8_t tlmVersion = 0x00;
+
+    Gap::AddressType_t my_mac_type;
+    ble.gap().getAddress(&my_mac_type, my_mac);
+    // Initialize a EddystoneBeaconConfig service
+    // Values for ADV packets related to firmware levels,
+    // calibrated based on measured values at 1m
+    static const PowerLevels_t defaultAdvPowerLevels = {-47, -33, -21, -13};
+    // Values for radio power levels, provided by manufacturer.
+    static const PowerLevels_t radioPowerLevels      = {-30, -16, -4, 4};
+    eddyServicePtr = new EddystoneService(ble,
+                                          defaultAdvPowerLevels,
+                                          radioPowerLevels);
+    // created short cut web addres by http://bitly.oshiire.org/
+    switch (check_dice()) {
+        case 1:     // Switch sience(mbed)
+            eddyServicePtr->setURLData("http://bit.ly/1oJh91B");
+            break;
+        case 2:    // switch sience(HP)
+            eddyServicePtr->setURLData("http://bit.ly/1oJhP7g");
+            break;
+        case 3:    // Taiyo Yuden BLE
+            eddyServicePtr->setURLData("http://bit.ly/1VvuCVr");
+            break;
+        case 4:    // Taiyo Yuden
+            eddyServicePtr->setURLData("http://bit.ly/1Vvtp0l");
+            break;
+        case 5:    // JH1PJL(mbed)
+            eddyServicePtr->setURLData("http://bit.ly/1Vvt51J");
+            break;
+        case 6:    // JH1PJL(HP)
+            eddyServicePtr->setURLData("http://bit.ly/1VvteT0");
+            break;
+        case 0:
+        default:   // Mbed
+            eddyServicePtr->setURLData("http://mbed.org");
+            break;
+    }
+    eddyServicePtr->setUIDData(&uidNamespaceID, &uidInstanceID);
+    eddyServicePtr->setTLMData(tlmVersion);
+    // Start Eddystone in config mode
+    eddyServicePtr->startBeaconService(5, 5, 5);
+}
+
+int main(void)
+{
+    pc.puts(opngmsg);
+    led = 1;
+    // Check TYBLE-16 configuration
+    cpu_sys();
+    if (compile_condition() == false) {
+        pc.printf("This is wrong configuration!!\r\n");
+        while(true) {
+            led = !led;
+            wait(0.2);
+        }
+    }
+    BLE& ble = BLE::Instance(BLE::DEFAULT_INSTANCE);
+    ble.init(bleInitComplete);
+    while (ble.hasInitialized() == false) {
+        ;
+    }
+    //
+    led = 0;
+    //pc.printf("line:%d\r\n", __LINE__);
+    while (true) {
+        ble.waitForEvent();
+    }
+}
+
+void onBleInitError(BLE::InitializationCompleteCallbackContext* initContext)
+{
+    // Initialization error handling goes here...
+    (void) initContext;
+}
+
+#endif