Eddystone Beacon only for TYBLE16
Please refer flowing link.
/users/kenjiArai/notebook/tyble16-module-will-become-a-mbed-family--mbedliza/
main.cpp
- Committer:
- kenjiArai
- Date:
- 2018-02-25
- Revision:
- 0:5087fec653b2
- Child:
- 1:95acd5ad69e8
File content as of revision 0:5087fec653b2:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* * /////// Works well on TYBLE16 Module /////// * Modified by Kenji Arai * http://www.page.sannet.ne.jp/kenjia/index.html * http://mbed.org/users/kenjiArai/ * * Started: Feburary 18th, 2018 * Revised: Feburary 25th, 2018 * * Original: * nRF51822_SimpleControls * https://developer.mbed.org/teams * /Bluetooth-Low-Energy/code/BLE_EddystoneBeacon_Service/ * Tested Controller Device: * iPhone6 Physical Web (PhyWeb) By Viet Hoa Dinh * https://itunes.apple.com/us/app/physical-web/id927653608?mt=8 */ // Include -------------------------------------------------------------------- #include "mbed.h" #include "TYBLE16_BASE.h" #include "BLE.h" #include "EddystoneService.h" // Object --------------------------------------------------------------------- DigitalOut led(P0_5); Serial pc(P0_1, P0_3); // Definition ----------------------------------------------------------------- // RAM ------------------------------------------------------------------------ EddystoneService *eddyServicePtr; Gap::Address_t my_mac; // ROM / Constant data -------------------------------------------------------- // Function prototypes -------------------------------------------------------- int8_t check_dice(void); uint16_t update_vdd(uint16_t x); uint16_t update_temp(uint16_t x); void onBleInitError(BLE::InitializationCompleteCallbackContext* initContext); void bleInitComplete(BLE::InitializationCompleteCallbackContext* initContext); //------------------------------------------------------------------------------ // Control Program //------------------------------------------------------------------------------ // !!!!!!!! Please select number of 0 to 6 !!!!!!!!!!!!!!!!! int8_t check_dice(void) { return 5; } void bleInitComplete(BLE::InitializationCompleteCallbackContext* initContext) { BLE &ble = initContext->ble; ble_error_t error = initContext->error; if (error != BLE_ERROR_NONE) { onBleInitError(initContext); return; } // Set UID and TLM frame data const UIDNamespaceID_t uidNamespaceID = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99}; const UIDInstanceID_t uidInstanceID = {0xAA, 0xBB, 0xCC, 0xDD, 0xEE, 0xFF}; uint8_t tlmVersion = 0x00; Gap::AddressType_t my_mac_type; ble.gap().getAddress(&my_mac_type, my_mac); // Initialize a EddystoneBeaconConfig service // Values for ADV packets related to firmware levels, // calibrated based on measured values at 1m static const PowerLevels_t defaultAdvPowerLevels = {-47, -33, -21, -13}; // Values for radio power levels, provided by manufacturer. static const PowerLevels_t radioPowerLevels = {-30, -16, -4, 4}; eddyServicePtr = new EddystoneService(ble, defaultAdvPowerLevels, radioPowerLevels); // created short cut web addres by http://bitly.oshiire.org/ switch (check_dice()) { case 1: // Switch sience(mbed) eddyServicePtr->setURLData("http://bit.ly/1oJh91B"); break; case 2: // switch sience(HP) eddyServicePtr->setURLData("http://bit.ly/1oJhP7g"); break; case 3: // Taiyo Yuden BLE eddyServicePtr->setURLData("http://bit.ly/1VvuCVr"); break; case 4: // Taiyo Yuden eddyServicePtr->setURLData("http://bit.ly/1Vvtp0l"); break; case 5: // JH1PJL(mbed) eddyServicePtr->setURLData("http://bit.ly/1Vvt51J"); break; case 6: // JH1PJL(HP) eddyServicePtr->setURLData("http://bit.ly/1VvteT0"); break; case 0: default: // Mbed eddyServicePtr->setURLData("http://mbed.org"); break; } eddyServicePtr->setUIDData(&uidNamespaceID, &uidInstanceID); eddyServicePtr->setTLMData(tlmVersion); // Start Eddystone in config mode eddyServicePtr->startBeaconService(5, 5, 5); } int main(void) { led = 1; BLE& ble = BLE::Instance(BLE::DEFAULT_INSTANCE); ble.init(bleInitComplete); while (ble.hasInitialized() == false) { ; } // Check TYBLE-16 configuration cpu_sys(); if (compile_condition == false) { pc.printf("This is wrong configuration!!\r\n"); while(true) { led = !led; wait(0.2); } } // led = 0; while (true) { ble.waitForEvent(); } } void onBleInitError(BLE::InitializationCompleteCallbackContext* initContext) { // Initialization error handling goes here... (void) initContext; }